Operation Manual

Charging Flashing green light
Fully charged Steady green light
Low battery Flashing red light (for a few seconds)
Abnormal state Steady red light
Monitor Status
Status Indicator
!
!
!
!
!
!
!
BATTERY HANDLING AND USAGE
• When the monitor is connected to an iOS device, the battery volume will be displayed on the iOS
device. If the power is less than 25%, please charge the battery. The monitor will not work until
the battery has enough power.
• When you charge the monitor, the LED will display with different colors indicating the charging
status. See the table below for details.
• When charging is needed, please connect the monitor to a power source. The monitor can work
normally while charging.
• It is suggested that you charge the battery when the battery is less than 25%. Overcharging the
battery may reduce its lifetime.
Do not change the battery. If the battery can no longer be charged, please contact Customer
Service.
Overcharging the battery may reduce its lifetime.
Lithium battery replacement by inadequately trained personnel could result in a hazard such as
a fire or explosion.
Do not plug or unplug the power cord into the electrical outlet with wet hands.
If the AC adapter is abnormal, please change the adapter.
Do not pull out the adapter when you are using the monitor.
Do not use any other type of AC adapter as it may harm the monitor.
The monitor, cable, battery and cuff must be disposed of according to local regulations
at the end of their usage.
11
Note: Battery life and charge cycles vary by use and settings.