Operation Manual

For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING

Pd 2.1= Pd 2.1= Pd 3.2=

Recommended separation distances between portable and mobile RF communications equipment and the Wireless Blood Pressure

Wrist Monitor

The Wireless Blood Pressure Wrist Monitor is intended for use in an electromagnetic environment in which radiated RF disturbances are

controlled. The customer or the user of the Wireless Blood Pressure Wrist Monitor can help prevent electromagnetic interference by

maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the monitor as

recommended below, according to the maximum output power of the communications equipment.

Rated maximum output power

of transmitter

Separation distance according to frequency of transmitter

150 kHz to 80 MHz

80 MHz to 800 MHz 800 MHz to 2.5 GHz

0.12 0.230.120.01

0.38 0.730.380.1

For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be

determined using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the

transmitter in watts (W) according to the transmitter manufacturer.

Note 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

Note 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from

structures, objects and people.

1.2 2.31.21

3.8 7.33.810

12 2312100

Table 4