Operating Instructions

ManualsBrandsiHome ManualsAudio EquipmentB60 Bluetooth Headphones

(Back)

(Front)

USB Charging Cable

What’s Included

Introduction

Your new Bluetooth stereo headphones are designed to link with your Bluetooth enabled

smartphone or music player to allow you to wirelessly listen to music and answer phone

calls within the normal 10 meter (33 feet) Bluetooth operating range.

Please review this manual carefully to make sure you are getting the maximum benefit

from all of the features of your new headphones, and keep this manual for future

reference.

PREPARATION FOR USE

1. Controls and Indicators

CHARGE

BEFORE

USE

Button (Volume Up / Skip Forward)

Button (Volume Down / Skip Back)

Power/Pairing/Charging LED Indicators

Power/Play/Pause Button

USB Charging Port

AUX Jack

2. Charging Your Headphones

Your Bluetooth headphones operate on a built-in rechargeable battery. Although the

battery was fully charged when it left our factory, the battery can lose power even

during periods of non-use. Make sure to charge the battery before using the

headphones for the first time.

To charge the battery connect the larger plug of the included USB charging cable to

the powered USB port of a computer or a USB/AC adapter, and then connect the

smaller plug to the USB charging port on the side of the right ear cup.

The Charging Indicator will glow red while the headphones are charging. The

indicator will turn off when the headphones are fully charged and ready to use.

When fully charged the battery should provide up to 24 hours of talk time or music

playing time at a normal listening level. If operated at maximum volume the music

playing time will be reduced.

NOTE: While charging, the headphone power will turn off to conserve battery power

and minimize charging time.

Model: B60 Serie

Generic IB (English only)

Color: Black text on white paper (1C + 1C)

Size: 270 x 135 mm

Date: Jul. 24, 2020.

WIRELESS

HEADPHONES

B60 Headphones

Detachable Audio Cable

Microphone

USB Adaptor

(not included)

Computer connected

to working outlet

The AUX jack allows you to use your Bluetooth headphones as normal headphones

so that you can listen to music on any non-Bluetooth device that is equipped with

a 3.5mm headphone jack. Connect the included audio cable to the AUX jack on the

right earcup of your headphones, and to the headphone jack of your auxiliary music

source.Your headphones should be in the Power “Off” mode. Use the volume and

track navigation controls on your music player as you would with any normal

headphones.

Computer

USB port

Model: B60 Series

2 3

OPERATING INSTRUCTIONS

1. First Time Power On: Auto Pairing

2. Standard Power On: Auto-Linking Mode

After the first time, whenever you power on the headphones, the blue LED will

flash slowly indicating that your headphones are in Auto-Linking Mode (trying

to re-link to a previously paired device) that is within the normal pairing range

of about 33-feet. If your headphones do not find a previously paired device

that is in range, the LEDs will start flashing red and blue (for new device

pairing) and then the power will shut off in 3 minutes if no device is connected

(to save the battery life).

4. Power Off

To turn the headphones ‘Off’ at any time, PRESS and HOLD the Power/Play/Pause

Button on the right earcup for about 5 seconds.The LED will turn red and then the

power shuts off. The headphones will shut off automatically if no music plays for 60

minutes.

The first time you power on the headphones, PRESS and HOLD the

Power/Play/Pause Button on the right earcup for about 3 seconds until the LED

flashes. The first time the headphones are powered on they will enter auto-pairing

mode, indicated by flashing red and blue LEDs.

a) Make sure Bluetooth is enabled on your device (check in Settings or Options).

b) “ekids B60” will apear on your device’s Bluetooth menu.

c) Select “ekids B60” to complete pairing. NOTE: If your Bluetooth device asks for a

Password or a PIN to complete the pairing process, enter “0000” on the keypad of

your device. You are now ready to begin streaming music wirelessly from your

Bluetooth device to your Bluetooth headphones.

5. Using Your Bluetooth Headphones

The following chart explains the basic functions and operations of your Bluetooth

headphones.

3. Manually Pairing Your Headphones With Your Bluetooth Device

NOTE: Your headphones must be ‘Off’’ to begin the manual pairing process.

With the headphones in ‘Off’ mode, PRESS and HOLD the Power/Play/Pause

Button on the right earcup for about 7 seconds, the LEDs will flash red and blue.

Release the Power/Play/Pause Button. Follow the a-c pairing instructions in Step 1

above to complete pairing.

Limited One-Year Warranty Information

eKids warrants this product to be free from defects in workmanship and materials, under

normal use and conditions, for a period of one (1) year from the date of original purchase.

Should this product fail to function in a satisfactory manner, it is best to first return it to the

store where it was originally purchased. Should this fail to resolve the matter and service

still be required by reason of any defect or malfunction during the warranty period, eKids

will repair or, at its discretion, replace this product without charge. This decision is subject

to verification of the defect or malfunction upon delivery of this product to the Factory

Service Center authorized by Customer Service. If service is required, please call Customer

Service at 1-888-TOP-TOYS to obtain a Return Authorization Number and shipping

instructions. A copy of the sales receipt is required to validate in-warranty coverage.

Disclaimer of Warranty

NOTE: This warranty is valid only if the product is used for the purpose for which it was

designed. It does not cover (i) products which have been damaged by negligence or willful

actions, misuse or accident, or which have been modified or repaired by unauthorized

persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage

to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this

product to the Factory Service Center and its return to the owner. This warranty is valid

only in the United States of America and does not extend to owners of the product other

than to the original purchaser. In no event will eKids or any of its affiliates, contractors,

resellers, their officers, directors, shareholders, members or agents be liable to you or any

third party for any consequential or incidental damages, any lost profits, actual, exemplary

or punitive damages. (Some states do not allow limitations on implied warranties or exclusion

of consequential damages, so these restrictions may not apply to you.) This warranty gives

you specific legal rights, and you may also have other rights which vary from state to state.

Your acknowledgement and agreement to fully and completely abide by the above mentioned

disclaimer of warranty is contractually binding to you upon your transfer of currency (money

order, cashier's check, or credit card) for purchase of your eKids product.

Distributed by eKids, LLC

For questions or comments please call our toll-free number:

1-888-TOP-TOYS

Also visit our website: www.ekids.com

1299 Main Street Rahway, NJ 07065

B60EXIB-072420-A Printed in China

FCC/IC Information

This device complies with Part 15 of the FCC Rules, operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

• Warning: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and

Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause undesired operation of

the device.

CAN ICES-3 (B)/NMB-3(B)

Function

Turn headphones On

Enter Pairing Mode

Pairing

Play / Pause

Skip to next track

Skip to beginning of current track

Skip to beginning of previous track

Increase volume

Decrease volume

Answer an incoming phone call

End a call

Transfer a call between the

phone and the headphones

Last number redial

Siri/Google Assistant

Reset Bluetooth/Clear all paired devices

Turn headphones Off

Action Required

When headphones are 'Off’, press and hold the Power/Play/Pause Button for 3

seconds until the LED indicator flashes blue.

When headphones are 'Off', press and hold the Power/Play/Pause Button for 7

seconds until the LED indicator alternately flashing red and blue.

Make sure your Bluetooth device is 'On' and discoverable. When “eKids B60”

appears on your device’s menu, select it to complete pairing.

Short press the Power/Play/Pause Button to start playback. Short press to pause

playback. Short press to resume playback.

Press the button twice during playback.

Press the button twice during track playing after 5 seconds.

Press the button twice in the track playing the beginning 5 seconds.

Press the button during playback (hold for rapid setting)

Short press the Power/Play/Pause Button when you hear the incoming ring sound.

NOTE: Music will automatically pause when you are answering a call and resume when

you end the call.

Short press the Power/Play/Pause Button to end the call and 'hang up'.

Press and hold the Power/Play/Pause button for 2-3 seconds.

While the call is in progress, press and hold the Power/Play/Pause Button for

2 seconds.

When no call is in progress, double press Power/Play/Pause button to redial the

last number.

Press and hold Power/Play/Pause button for 5 seconds until the LED indicator

turns red and then shuts off. Headphones will shut off automatically if no music

plays for 60 minutes.

FCC ID: EMOB60A

IC: 986B-B60A

HVIN: B60a

Press and hold the for 5 seconds during pairing mode.