IH-W310NS IH-W312NP IH-W311NN IH-W313NR MyLife™ notebook webcam 5.0 megapixel max resolution Congratulations on the purchase of your new MyLife notebook webcam. This product comes with a limited lifetime warranty. Before using your product, please thoroughly read and follow the instructions inside this manual. If you still need help, see the back page for other support options. If you want to know more about our products, visit us online at www.life-works.com.
your package should contain user manual contents features • 2 your new webcam • 3 install software • 3 to install the webcam driver • 3 to install the included webcam application • 4 connect hardware • 5 use your webcam • 5 advanced features • 5 capture still shots or videos • 6 change video settings • 7 zoom • 8 remove video flicker • 8 turn on face tracking • 9 use special effects • 9 MyLife notebook webcam .
your new webcam manual focus ring snapshot button install software to install the webcam driver USB cable 1. Insert the installation CD into your computer. On the screen that appears, click install driver. lens clip power indicator microphone MyLife notebook webcam Model # IH-W310NS/IH-W311NN/IH-W312NP/IH-W313NR ArcSoft MediaImpression™ install driver ff note You must install the driver software before connecting your webcam to your computer. exit www.life-works.
to install the included webcam application 6. After the application has been installed, an Associated 1. On the main software installation screen, click ArcSoft MediaImpression. MyLife notebook webcam Model # IH-W310NS/IH-W311NN/IH-W312NP/IH-W313NR ArcSoft MediaImpression™ install driver exit www.life-works.com 2008© LifeWorks Technology Group LLC. iHome™ is a trademark of SDI Technologies Inc. used under license. 2. Select a setup language, then click OK. 3.
connect hardware use your webcam 1. Connect the USB cable to a USB port on your computer. You can start using your webcam immediately for video conferencing with one of the many video conferencing services available over the internet. Additional features are available through the ArcSoft MediaImpression software. connect to a USB port on your computer advanced features Click Start > All Programs > ArcSoft MediaImpression > MediaImpression to open the Start Page. 2.
capture still shots or videos 1. From the Start Page, click WebCam. The Capture window displays. • For a still shot, click Capture. (You can also take a still shot by pressing the snapshot button on top of the webcam.) 6 • To record a video clip, click Record Video. When done, click Stop Recording. (To improve the quality of your videos see “change video settings” on page 7) 2. When capture is complete, close the Capture window.
change video settings To change video settings and access other webcam settings, click the webcam settings icon in the Capture window. 4. Add and remove video and still shots as desired to compose your movie. Change the movie options as desired. Click Preview to view the movie. 5. When done and ready to publish, save the project by clicking Project > Save. To save a copy of the final movie, click Save As. To burn your movie to a DVD or VCD, click Burn to Disc.
The webcam properties dialog box displays. 2. The webcam properties dialog box displays. Select the Stream Property tab. 3. Click and drag the Zoom slider to change the zoom level, left to zoom out and right to zoom in. 4. Click OK. remove video flicker Here you can change image, video and camera settings, as well as set other advanced options. zoom Your webcam can zoom in as much as 3×. To change the zoom level: 1.
3. Select the AC power frequency used in your region of the world: 60 Hz for the U.S., Taiwan, Korea or Japan (west), or 50 Hz for Europe, Australia, Africa, Asia, China or Japan (east). 3. Select the Face Tracking option. 4. Click OK. use special effects A number of effects can be applied to a photo or video. To apply an effect: 4. Click OK. 1. Click the webcam settings icon in the Capture window (see “change video settings” on page 7). turn on face tracking 2.
product operating tips • Your webcam operates best if you sit about 3 ft. (1 m) from the camera. This ensures the picture is not distorted and that the microphone can easily pick up your voice. • Turn the ring on the front of the webcam to manually focus the image. • Press the button on top of the webcam to take a still shot. • Click Extras > Help in ArcSoft MediaImpression for more details on how to use the application with your webcam.
FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules.
Printed in China © 2008 LifeWorks Technology Group LLC. iHome™ is a trademark of SDI Technologies Inc. used under license. Windows Vista® is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. All other brands and logos are trademarks of their respective companies. technical support for technical support please visit www.life-works.com or call (877) LIFE-540 (877-543-3540) lifetime warranty for warranty information, please visit www.life-works.