iA5 English Manual Size: 6”W x 4 3/4” H Print in Black May 30,11 iA5 instruction manual
Introduction iA5 Thank you for purchasing the iHome iA5, the app-enhanced alarm clock for iPhone or iPod. This instruction booklet explains the basic operation and care of the unit. There are many exciting performance enhancements available by downloading the free iHome+Sleep app from the iTunes App Store. For information on the iHome+Sleep app and how it works with your iA5, please use these resources: user forum: http://getsatisfaction.com/ihomeapps web: www.ihomeaudio.com/apps. email: apps@ihomeaudio.
Using the Table of Contents iA5 Controls and Indicators.......................................1 iA5 Display......................................................2 Getting Started .................................................3 Docking your iPhone/iPod ..................................4 Setting the Clock with Time Sync ..........................4 Setting the Clock Manually..................................5 Setting the Alarm ..............................................6 Snooze .......................
iA5 Controls and Indicators Top Panel power/app button (press and hold to access product config screen from iHome+Sleep app homescreen when app is running) power ZZZ snooze/dimmer button dock Front Panel – button (decrease setting) bedtime button Rear Panel + button (increase setting) bedtime wakeup display on/auto button display on | auto eq button eq clock wakeup button DC jack alarm line-in jack sync clock sync button alarm button 1
iA5 Display Note: Display and indicators depend on mode. The iA5 is specially designed to work with the iHome+Sleep alarm clock app. For optimized compatibility, by default the iA5’s display will automatically deactivate and defer to a docked iPhone or iPod touch’s display when the iHome+Sleep app is running (active). To override this and keep the iA5 display on, exit the iHome+Sleep app then press the display on/auto button located on the back of the unit.
Using the 1 iA5 2 CR2032 RESET R ESET TEST T EST Getting Started 1.Plug the AC adapter into the DC jack on the back of the iA5 and the other end into a working outlet. 2.This unit comes with a CR2032 battery installed for battery backup in the event of a power disruption. When the battery low indicator appears on the display, the battery needs to be replaced with a fresh battery.
Using the Docking your iPhone/iPod iA5 1. Gently dock your iPhone or iPod to the 30 pin connector on the front of the unit. Do not force. If you have not already downloaded the free iHome+Sleep app from the iTunes App Store, you will see the following message on your iPhone or iPod Touch display: “This accessory requires an application that you do not have installed.” The purpose of this message is to advise you that you must download the iHome+Sleep app to enjoy the enhanced features of the iA5.
Using the Setting the Clock Manually iA5 1.Press and hold the clock sync button located on the back of the unit until the display flashes. 2.Press the + and - buttons located on the front of the unit to adjust the time (hold the buttons to adjust rapidly. Make sure to set the correct AM or PM time (the pm indicator appears on the lower right of the display; there is no am indicator). 3.
Using the iA5 Setting the Alarm 1.Press and hold the alarm button located on the back of the unit until the display flashes. 2.Press the + and - buttons located on the front of the unit to adjust the alarm time (hold the buttons to adjust rapidly. Make sure to set the correct AM or PM alarm time (the pm indicator appears on the lower right of the display; there is no am indicator). 3.Press the alarm button again. The alarm volume will flash. Press the + and - buttons to adjust the alarm wake up volume. 4.
Using the iA5 Snooze 1.Press the snooze/dimmer button located on top of the unit while the alarm is sounding. The alarm will be silenced for 9 minutes (default) then come on again. 2.When alarm is NOT sounding, press and hold the snooze/dimmer button until the display flashes, then press the + and - buttons to program the snooze timer to a different interval (1 to 29 minutes). 3.Press the snooze/dimmer button. Two beeps will sound confirming snooze programming is complete.
Using the Arming and Resetting the Alarm iA5 1.Press the alarm button located on back of the unit to turn the alarm ON. An alarm icon will appear on the display. The alarm will sound at the set time. 2.Press the alarm button at any time to turn the alarm OFF. 3.Press the power/app button or the wakeup button when the alarm is sounding to power off the iA5 and reset the alarm to come on the next day at the same time.
Playing and Charging iPhone/iPod 1.Gently dock your playing iPhone or iPod. The iA5 will turn on and you will hear your audio. If the volume is too low, the unit may not detect your iPhone or iPod audio. If this occurs, press the power/app button to turn the unit on. While docked, your iPhone or iPod will charge until fully charged. 2.Press + or - button to adjust the volume. 3.Press the eq button located on the back of the unit to toggle between bass and treble adjustment.
iA5 A Consumer Guide to Product Safety This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules.
Consumer Product Safety Guide When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. 2. 3. 4. 5. 6.
7. 8. 9. 10. 11. 12. 13. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. Attachments – Do not use attachments not recommended by the product manufacturer. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time.
Troubleshooting Unit doesn’t respond (no power) Make sure AC adaptor is connected to unit and is plugged into a working outlet (plug another device into the same outlet to confirm outlet is working, and make sure any associated power switch is ON). iPhone/iPod does not respond to unit Make sure you have latest firmware for your iPhone or iPod (update via iTunes if needed). Make sure your device is working properly. Check your iPhone or iPod manual for details.
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
iA5-053011-A ©SDI Technologies 2011 All rights Reserved Printed in China
