iBN20 Eng IB Size: 153mm x 120mm Printing color: Black Jun 17, 2013 P1 iBN20 NFC Bluetooth Wireless FM Clock Radio with USB Charging instruction manual
P2 Introduction iBN20 Thank you for purchasing the iHome iBN20. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference.
P3 FCC Information iBN20 FCC ID: EMOIBN20 IC: 986B-IBN20 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
P4 Table of Contents iBN20 Meet Your iBN20.......................................................................................................... 1-3 The Display/Setting Up the Unit ..........................................................................................4 Setting the Clock/ FM Radio ..............................................................................................5 Setting and Using FM Presets................................................................................
P5 iBN20 Included • iBN20 system • 100V-240V universal AC adaptor • 3.
P6 iBN20 Meet Your iBN20 Top NFC Antenna Volume Down Button Power Button Volume Up Button Minus/ Plus Settings Buttons Play/ Pause and Presets Button Nap/ Clock Set Button Alarm Button Mode Button Sleep Button Snooze/ Dimmer Button 2
P7 iBN20 Meet Your iBN20 Back USB Charging Port Pairing Button Aux-in Jack DC Jack Antenna Bottom Backup Battery Compartment (pull battery tab before use) 3
P8 Using the The Display Low Backup Battery Indicator PM/AM Indicators Time Display Alarm Active Indicator Bluetooth Pairing Indicator Bluetooth Audio Indicator iBN20 FM Mode Indicator Aux-in Mode Indicator Snooze Mode Indicator Wake to Alarm Source Indicators: Tone, Radio, Bluetooth device Setting Up the Unit Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet.
P9 Using the Setting the Clock iBN20 1. Press and hold the Nap/Clock Set Button for 2 seconds until the clock display flashes and a beep sounds. 2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting). Make sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the display. 3. To toggle the clock display between standard 12 hour time and 24 hour (“military”) time display, press the Alarm Button during time setting. 4.
P10 Using the iBN20 Setting and Using FM Presets The unit allows you to store up to 6 FM radio station presets 1. Press the Button on the unit to turn it on. 2. Press and release the Mode Button as needed until the FM indicator icon and current FM radio station appear on the display. 3. Press and release the Presets Button as needed until the preset number (P1- P6) you wish to set is displayed, then press and hold the Presets Button to enter setting mode. 4. Press the – or + station).
P11 Using the Setting and Using the Alarm iBN20 Note: each step must be completed while display is flashing or step will time-out with any changes saved. 1. Press and hold the Alarm Button for 2 seconds until the time display and alarm icon flash. 2. Press the – or + Buttons to adjust the alarm time to the desired time (hold for rapid setting). Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear to the left of the display. 3.
P12 Using the iBN20 Snooze/Dimmer Button 1. To program Snooze, press and hold the Snooze/Dimmer Button during normal operation (when no alarm is sounding). 2. Press the – or + Buttons to select the desired snooze time (between 01 and 29 minutes). 3. Press and release the Snooze/Dimmer Button to confirm Snooze setting 4. While the alarm is sounding, press and release the Snooze/Dimmer Button to temporarily silence the alarm for the set duration (9 minutes is the default).
P13 Using the iBN20 Using Bluetooth: Pairing and Playing Your Device Using NFC This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play instantly. For pairing non-NFC devices, please see the following section “Pairing Your Device Using Standard Bluetooth”. 1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on Bluetooth capability as described in the device’s user manual. 2. Place your NFC–enabled device in play mode. 3.
P14 Using the iBN20 Pairing Your Device Using Standard Bluetooth 1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user manual. 2. Press and hold the Pairing Button on the back of the unit for 2 seconds until the Bluetooth icon flashes on the display and a beep sounds, indicating pairing attempt. “iHome iBN20” should appear on your device’s menu.
P15 Using the Playing Audio Via Bluetooth iBN20 1. Press the Button to turn the unit ON. 2. Press and release the Mode Button as needed until the Bluetooth wave indicator icon appears on the display. 3. Press the Play Pause Button on the unit to play audio from your linked Bluetooth device. 4. Press the – or + Buttons to go to the previous or next track. 5. Press the or Buttons to adjust the volume on the unit. 6. When done listening, press the Button to turn the unit off.
P16 Using the Charging Devices via USB Port iBN20 1. Connect the standard size end of a USB cable (not included) to the USB Port on back of the unit and connect the other end to the charging port on your device. 2. Monitor the charging on your device. Some devices use a proprietary charging method and will not charge using the USB Port. If this happens, you must charge your device using the charger that came with it.
P17 Replacing and Installing Clock Backup Battery Using the iBN20 Note: The CR2450 lithium battery is included in the unit. Please pull out the battery pull tab before you use the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption (the display is NOT maintained). The battery backup circuit will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is out.
P18 Troubleshooting Unit doesn’t respond (no power) • Check that all connections are correct and properly plugged in. • Make sure your device is properly paired with the iBN20. • Make sure the Power is ON. Unit doesn’t respond (locked up or frozen) • The unit may need to be reset. To do so, unplug the unit from power source and remove the backup battery. Let unit stand for 2 minutes. Re-install backup battery and connect unit to power source.
P19 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P20 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
