Instruction Manual

Unit doesn’t respond (no power)

• Check that all connections are correct and properly plugged in.

• Make sure your device is properly paired with the iBT22.

• Make sure the Power is ON, indicated by “ON” appearing briefly on the display.

Resetting the Unit

If Bluetooth function is not operating properly, you may wish to reset Bluetooth. To do so,

press and hold the Button for 10 seconds. You will hear a beep and the Bluetooth icon will be gone

from the display. You will then need to re-pair any previously paired devices.

Trouble pairing device/computer with iBT22

Bluetooth implementation varies depending on your device’s hardware and operating system. Please see

our website for updates on pairing.

• Make sure you have the latest firmware for your device.

• Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing

and linking.

• When you power ON the speaker, it will automatically link with the last previously paired Bluetooth

device if the device is still within range (approx. 30 feet). To pair with a different device you must turn

off Bluetooth capability on the already paired device, or take it out of range.

Troubleshooting

P19

For further information and to see the latest instructions, visit www.ihomeaudio.com/support