Owner's Manual

Using Bluetooth: Pairing Your Device

NOTE: See the iBT22 Bluetooth Connection Guide for complete pairing details.

Whenever it is powered on, this unit will attempt to autolink to a previously paired device. If no device is

detected, the unit will automatically enter pairing mode for 2 minutes. Y

ou can manually initiate pairing

without turning on the unit by following steps 1-3 below.

1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make it

“discoverable” by turning on Bluetooth mode (check in Options or Settings) .

2. Press and hold the Bluetooth Pairing Button on the back of the unit for 2 seconds. The unit will beep

and the Bluetooth icon will flash on the display, indicating the unit is in pairing mode.

3. “iHome iBT22” should appear in your device’s menu. If “Not Paired”, “Not Connected” or similar

message appears, select “iHome iBT22” to connect it. If prompted for a passcode, enter “1234” on

your device’s keypad.

4. If pairing is successful, a beep will sound, “PAIR” will appear briefly in the bottom display and the

Bluetooth icon will become solid. There should also be an indication on your device. If no device is

successfully paired within 2 minutes the unit will default to previous mode. Once unit is paired to a

device, it will attempt to autolink when the device is within range (about 30 feet).

iBT22

Using the

P13