iBT44 IB Size: 153mm x 120mm Printing color: Black Mar 20, 2013 P1 iBT44 Bluetooth Wireless Boombox with FM Radio and USB Charging instruction manual
P2 Introduction iBT44 Thank you for purchasing the iHome iBT44. This product is designed to provide high quality wireless sound for your Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
P3 FCC Information FCC Radiation Exposure Statement iBT44 FCC ID: EMOIBT44 IC: 986B-IBT44 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
P4 Table of Contents iBT44 Meet Your iBT44 ........................................................................................................... 1-2 Setting Up the Unit......................................................................................................... 3-4 Using Bluetooth: Pairing Your Device ....................................................................................5 Playing Audio Via Bluetooth...........................................................................
P5 iBT44 Included • iBT44 system The handle of the unit can be placed in two positions, upright for carrying, or back for general use or tilt-back play. • 100V-240V universal AC adaptor • 3.5mm stereo audio cable • FM Antenna • Shoulder strap • Remote control IBT44 System AC power adaptor FM Antenna 1 3.
P6 iBT44 Meet Your iBT44 Front Volume Knob Display Tuning Knob Power Button FM Radio Button Graphic Equalizer Buttons Bluetooth/Line-in Button Play/Pause Button Press top of each to raise, bottom to lower for best sound Remote Button Back In Auto mode, will disable remote when operating on batteries to save battery life. Press in (ON) to activate remote during battery operation.
P7 Using the Setting Up the Unit This unit can be operated using the included AC adaptor or with 6 “D” batteries for portable use (not included). RESET R ESET TEST T EST For AC operation, place unit on a stable surface. Plug the power adaptor into the DC jack on back of the unit and the other end into a wall socket. The USB port can charge devices while connected to AC power For battery operation, place unit upside down to access the battery compartment.
P8 Using the Setting Up the Unit iBT44 Installing and adjusting the carry strap Insert the folded end of the strap under the strap pin and pull up, then thread this end through the strap adjuster slide. Pull on strap adjuster to adjust for proper fit and comfort. Make sure the strap is securely fastened. Repeat on opposite end of unit. The Display By default, the display shows the five bands of the graphic equalizer as the frequencies change during audio playback.
P9 Using the Using Bluetooth: Pairing Your Device iBT44 1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user manual. 2. Press the Power Button to turn the unit ON (pairing is available in any mode). 3. Press and hold the Button on the unit for 2 seconds to begin pairing the unit with your device. “PAIR” will flash on the display, and the button will flash blue, indicating pairing attempt. “iHome iBT44” should appear on your device’s menu.
P10 Using the iBT44 Pairing with a Different Device When you power ON the unit, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (about 30 feet). Playing Audio Via Bluetooth 1. Press the Power Button to turn on the unit in the last active mode. If needed, press the Button to enter Bluetooth mode.
P11 Using the Playing Audio via Line-In iBT44 1. Connect one end of the standard stereo 3.5mm audio cable (included) into the line-in jack on the back of the unit and the other end into the headphone or output jack of your audio device. 2. Power on the audio device and use the controls on the device to play or pause audio and navigate tracks. 3. Press the Power Button to turn on the unit in the last active mode.
P12 Using the iBT44 Using FM Radio in Other Countries Different areas of the world use different FM frequency steps and ranges. By default, this unit is set to USA frequency steps. To use the radio outside the USA: 1. Press and hold the FM Radio Button for 5 seconds until “USA” appears in the display. 2. Turn the Tuning Knob to select to your location: Europe, Japan, Australia, China or USA. 3. Press the FM Radio Button to exit frequency setting mode.
P13 Using the The Remote Control iBT44 The unit comes with a magnetized remote control which fits into a slot on the top of the unit. The remote comes with one CR2032 battery already installed. Remove the battery tab to use the remote. Power Button • Turns unit ON or OFF.
P14 Using the The Remote Control (continued) iBT44 When the range of the remote seems reduced or if it ceases to work properly, it’s time to replace the battery. 1. Press point of a pin or paperclip firmly into the hole by the battery compartment cover on the rear of the remote control to release the cover. 2. Slide battery compartment cover off (remove old battery if replacing). 3. Place new CR2032 in battery well as shown (make sure + side is facing up). 4. Replace battery compartment cover.
P15 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P16 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10.
P17 Troubleshooting Unit doesn’t respond (no power) • • • • Make sure unit is connected to AC power OR has 6 fresh “D” batteries. Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iBT44. Make sure the Remote Button on the back of unit is pressed in while operating on batteries to control using the remote. Can’t see the display • The display may have been dimmed/turned off in Bluetooth mode.
P18 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.