Instruction Manual

6
Setting and Using the Alarm (Cont’d)
3. Press the Alarm Button to confirm the alarm time setting. The wake-to schedule will flash. Press
the – or + Buttons to set the desired alarm schedule: 7 Days (every day), 5 Days (week days
only) or 2 Days (weekends only).
4. Press the Alarm Button to confirm the alarm schedule. The wake source indicator will flash on the
display. Press the – or + Buttons to select the desired wake to alarm source: “bt” (Bluetooth)
or tone.
Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device
is detected, the alarm will default to current Tone.
Wake to Tone: Press the Alarm Button to confirm. Press the – or + Buttons as
needed to listen to and to select one of the four built-in wake-to
tones (t1 - t4).
5. Press the Alarm Button to confirm the alarm source. The volume display will flash.
6. Press the – or + Buttons to adjust the alarm volume. Note that the alarm volume setting is
stored separately from other volume settings.
7. Press the Alarm Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will
confirm alarm setting is complete. The alarm icon will remain on the display, indicating the alarm
is armed.
Using the iBTW39
Previewing the Alarm and Turning the Alarm On/O
1. Press and release the Alarm Button to view the current alarm time.
2. Press and release the Alarm Button as needed to toggle the alarm ON and OFF, indicated by the
related white alarm indicator and a beep.
3. When the alarm sounds, press the Power Button or corresponding Alarm Button (1 or 2) to
disable the alarm and reset it to come on at the same time the next day.