Instruction Manual

iHome

iBTW39

Using the iBTW39

Pairing Your Bluetooth Device

Pairing establishes a unique communication connection between your Bluetooth device and the

speaker. Once paired, you will be able to stream audio wirelessly to your Bluetooth Rechargeable

Speaker. When AC power is connected, and the Button OR or Bluetooth Button is pressed, the

iBTW39 will attempt to autolink to a previously paired device.

1. Turn on your Bluetooth device and make it “discoverable” by turning on

Bluetooth mode (check in Connections or Settings).

2. Press the Button to turn on the iBTW39. The ﬁrst time the unit is powered

on it will enter pairing mode automatically. After this, you will need to pair

using the Bluetooth Button after powering on (see step 3 below).

3. Press and hold the Bluetooth Button on back of the iBTW39 for 2 seconds.

“PAIR” will appear on the display and the Bluetooth indicator will ﬂash blue, a

voice prompt will announce "PAIRING", indicating the iBTW39 is in pairing

mode.

4. Select “iHome iBTW39” in your device’s Bluetooth menu to connect device. If

prompted for a passcode, enter “1234” on your device’s keypad.

5. If pairing is successful, a voice prompt will announce “CONNECTED”, then Bluetooth indicator appear

solid blue, indicating the iBTW39 is ready to play music. There should also be an indication on your

device. If no device is successfully paired within 3 minutes the iBTW39 will default to previous mode.

Once the iBTW39 is paired to a device, it will attempt to autolink when the device is within range

(about 33 feet). To reset Bluetooth, press and hold the Bluetooth Button for 10 seconds.