Model: iC16 - ENGLISH (front) Instruction Manual For Kingstech Date: April 27, 2012 Print color : 1C Black text on white paper Fold: 4 fold Size: 130W x 130H mm Model iC16 Portable Alarm Clock Speaker System for your Android SMARTDESIGN for android™ QUESTIONS? Visit www.ihomeaudio.
Table of Contents 1 2 3 3 4 4 5 5 6 7 8 9 10 Controls and Indicators Quick Start iC16 Display Install Clock Backup Battery Using iC16 Charging your Android Listening to your Android Setting the Time Alarm Operation Snooze/Dimmer Operation A Consumer Guide to Product Safety Trouble Shooting Warranty Information Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish.
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Controls and Indicators Top Panel + Button Raise volume, Adjust clock/alarm time forward Clock Adj.
Quick Start 1:power 2:Android RESET R ESET TEST T EST Connect one end of the included stereo audio cable with 3.5 mm plugs to the headphone jack on your Android device and the other end to the aux in jack on the back of the unit. Press the Power Button on the iC16. Put your Android device in play mode. Press the + or – Button on the iC16 to adjust the system volume. Attach the AC adaptor cable to the AC adaptor jack on the back of the iC16 and plug the other end into a working wall socket.
iC16 Display Snooze Indicator Daylight Saving Time Indicator Battery Low Indicator Audio Indicator PM Indicator Time Display Alarm Indicator Install Clock Backup Battery The iC16 uses a CR2032 button cell battery (included with instructions) to keep alarm and clock settings in the event of a power failure and 4 “AA” batteries to maintain alarm operation.
Using iC16 RESET E R SET TEST E T ST Install AC Adaptor Connect the AC adaptor cable plug into the AC adaptor jack on the back of the iC16, then plug the AC adaptor into the wall outlet. Installing/Replacing Batteries for Portable Operation The iC16 uses 4 “AA” batteries for portable operation. The iC16 will not charge your Android while operating on batteries. If sound becomes weak or distorted, it is time to replace the batteries. • Open the battery compartment cover located on the bottom of the unit.
Listening to Your Android 1. Connect the included stereo audio cable to the output/headphone jack on your Android and the other end to the aux in jack located on the back of the unit. 2. Press the Button on the iC16. The Audio Indicator ( ) appears in the display. 3. Place your Android in play mode. Use the transport controls on your Android for playing/pausing, scanning and skipping tracks, etc. 4. Press the or buttons on the iC16 to adjust the system volume. 5.
Alarm Operation Note: In order for the alarm to operate you must install the 4 "AA" batteries or have the AC adaptor connected. The CR2032 back up battery will maintain the time and alarm settings but it will not turn on the alarm. This unit features Gentle Waking, which gradually increases the volume of the alarm. Setting the Alarm 1. Press and hold the Button until the hour display flashes. Press the or Button until the desired alarm hour is displayed.
Snooze/Dimmer Operation Programming Snooze Time The default snooze time is 9 minutes. You can adjust the snooze duration. During normal operation (when alarm is NOT sounding), press and hold the Snooze/Dimmer Button for 2 seconds until the ZZZ indicator and Snooze time display flashes. Adjust the duration of snooze time up or down (between 1 - 29 minutes) by pressing the or Buttons. Press and hold the Snooze/Dimmer Button to confirm. Using the Snooze/Dimmer Button 1.
A Consumer Guide to Product Safety IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. 2. 3. 4. 5. 6. 7. 8. 9.
Trouble Shooting Symptom Unit doesn’t respond (no power) Android doesn’t charge up Possible Problem Solution AC adaptor isn’t plugged into a wall outlet or the connector is not plugged into the power supply jack on the back of the unit Plug the AC adaptor into a wall outlet and plug the connector into the supply jack on the unit Wall outlet is not functioning Plug another device into the same outlet to confirm the outlet is working. Turn on any switch that controls the outlet.
Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of One Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.