iD83 IB_US version Size: 178 x 178 mm (16 pages) Printing color: Black Mat’l: 90gsm book paper Nov. 14, 11. P1 Model iD83 The Home System For Your iPad® works with iHome Sleep alarm clock app iHome Radio internet radio app Note: iHome Sleep and iHome Radio apps are not covered in detail in this booklet. To learn more about how these apps can enhance your experience, please download the free iHome Sleep app from the App Store and review the Start Guide. Questions? For latest instructions, visit www.
P2 Table of Contents Controls and Indicators / Unit Display ..........................................................................................................................1 Quick Start ........................................................................................................................................................................2 Setting Up the unit .............................................................................................................................
P3 Controls and Indicators Top Panel Flexible 30 pin connector for iPad/iPhone/iPod Rubberized device rest Alarm 2 Button Play/Pause Button Alarm 1 Button Nap Button Volume + Button Set + Button Bedtime Button Wakeup Button nap wakeup bedtime Volume - Button mode presets eq Set - Button volume set +/- Alarm Reset/Power/App Settings Button EQ Button Presets Button Mode Button snooze/dimmer Snooze/Dimmer Button Rear Panel Time Set Button AC Adaptor Jack Time Sync Button Line-in Jack
P4 quick start 1: power RESET snooze/dimmer R ESET set +/- volume TEST eq wakeup bedtime T EST DC 7.5V time set DST -1 time sync time zone line-in +1 Attach AC adaptor cable to DC jack on back of the unit and plug the other end into a wall socket. 2: docking your iPad/iPhone/iPod iPad with cover remove the rubber dock pad Gently dock your iPad, iPhone or iPod into the 30 pin dock. If using an iPad with a cover or “skin”, first remove the rubber dock pad on the unit.
P5 quick start 3: time sync Dock your iPad, iPhone or iPod (see step 3). Press and release the Time Sync Button located on back of the unit. “TIME SYNC” will appear on the display, followed by “TIME UPDATED” upon successful syncing. 4: radio Press the Mode Button as needed to select FM band. Press the + or - Button to tune in a station. See page 7 for programming presets.
P6 Setting Up the Unit Updating your iD83 firmware For best performance, make sure to update the unit’s firmware. To do so, download the free iHome Sleep app from the App Store. Launch the app, then go to Settings/iD83 and follow directions to update the firmware. Connect unit to Power Source Plug the AC adaptor cable into the AC Adaptor Jack and the other end into a standard 120V AC wall socket. Adaptor must be plugged in to operate unit.
P7 Using the unit Using the Alarms This unit has a dual alarm system so you can set two separate alarms to different alarm times, wake-to sources and frequencies (daily, weekdays or weekend).Tip: Download the free iHome Sleep app for advanced alarm, snooze and sleep functions Setting the Alarms 1. Press and hold the or Button until the alarm time flashes on the lower part of the display. Press the + or - Button to set the alarm time (hold for faster setting). Remember to set the correct AM or PM time. 2.
P8 Using the unit Snooze Operation 1. To program a custom snooze time, press and hold the Snooze Button during normal operation (when alarm is not sounding) until the snooze minutes display appears. Press the + or - Button to set the snooze timer from 1 to 29 minutes. Press the Snooze/Dimmer Button to exit snooze setting mode. 2. Press the Snooze/Dimmer Button after an alarm sounds. The alarm will be silenced for the set snooze duration time then sound again.
P9 Using the unit 3. You can set up to 6 presets. To memorize a station as a preset: A. Press and release the Mode Button to select the FM band. B. Press and release the Preset Button as needed to step through the 6 presets (P1 - P6) to the number you wish to assign, and then hold the Preset Button until the selected preset number begins flashing in the display. C. Press and release the + or - Button to tune the radio to a desired station.
P10 Using the unit Nap Operation Nap mode lets you set an alarm separate from the Alarm 1 and Alarm 2 settings. The nap wake to source by default is the buzzer alarm, but if an iPad/iPhone/iPod is docked, that will act as the alarm source. If you are listening to the radio or aux-in source, it will be muted and the buzzer will sound at the selected wake time. 1.
P11 A Consumer Guide to Product Safety IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. 2. 3. 4. 5. 6. 7. 8.
P12 Troubleshooting Symptom Possible Problem Solution Unit does not turn on AC adaptor isn't plugged into a working wall socket or not plugged into the power supply jack on back of the unit Plug the AC adaptor into a working wall socket and plug the connector into the supply jack on the unit Unit doesn’t respond Unit requires a reset If unit is plugged in and doesn't respond, try resetting the unit by following these steps: a) remove iPad/iPhone/iPod from dock b) unplug unit from power source c) re
P13 Troubleshooting Symptom Sound is distorted Possible Problem Solution Volume level is set too high Decrease the volume Sound source is distorted If the iPad/iPhone/iPod original sound source is old or of poor quality, distortion and noise are easily noticed with high-power speakers. Try a different audio file from a trusted source such as iTunes. If you are using an external sound source try reducing the output volume on the device itself. Also try turning bass boost OFF.
P14 Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.