Model: iH70 Instruction Manual Date: April 9,08 Print color : Black text on white paper Size: 178W x 178H mm Model iH70 Computer Speaker System for your iPod ® Questions? Visit www.ihomeaudio.
Table of Contents Quick Start 1 Controls and Indicators 2 Using iH70 3 Charging your iPod 3 Listening to your iPod 3 Listening to Computer Audio 3 Listening to non-docking iPod or other audio devices 4 Listening to Headphones 4 Syncing your iPod to a Computer through iH70 4 Using the Optional Remote Control 5 Install/Replace the Remote Control Battery 5 A Consumer Guide to Product Safety 6 Trouble Shooting 7 Solución De Problemas 8 Warranty Information 9 Maintenance • Place the
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Quick Start: Connections 1:power 2:connections Attach the AC adaptor cable to the jack on the back of the left speaker and plug the other end into a working wall socket. 1) Connect the left and right speaker using the included speaker cable. The arrows on the plugs should face upwards. 2) Connect the USB cable to the left speaker and a powered USB port on your computer.
Controls and Indicators Front Panel Left Speaker Right Speaker iPod sync mode LED Power LED Power Button Lower Volume Button iPod Dock Raise Volume Button Back Panel Left Speaker Side Left Speaker Panel Right Speaker To Computer audio Jack Aux-in Jack iPod sync Button DC Jack Right Speaker Jack Stand To left speaker Jack USB Jack 2 Headphone Jack
Using iH70 Install AC Adaptor Connect the AC adaptor cable plug into the jack on the back of the left speaker, then plug the AC adaptor into the wall outlet. Install iPod Insert Your iH70 comes with inserts to ensure your iPod fits properly in the dock. To place an insert: 1. Select the insert for your iPod (see table on page 1). 2. Gently press the iPod insert into the dock. 3. Carefully place your iPod into the dock. The iPod must not be in a case or “skin”.
Listening to non-docking iPod or other audio devices 1. Plug one end of an audio cable (available at www.ihomeaudio.com) into the headphone or line-out jack on your device and the other end of the patch cord into the iH70 Aux-in Jack. 2. Press the button on the right speaker to turn the iH70 on. 3. Press the or Buttons on the right speaker to adjust the system volume. You may need to adjust your device volume, too. 4. To turn off the iH70, press the button on the right speaker.
Using the Optional Remote Control Power Button turns unit ON and OFF Volume Buttons raise and lower volume on the unit. Pressing FWD/REV while iPod is inserted will FWD/REV to next/previous track Pressing and holding FWD/REV while iPod is docked will scan forward/reverse within currently playing track. Pressing Play/Pause from power off mode will play iPod. Pressing Play/Pause while iPod is docked and playing will pause iPod. Press again to resume play.
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
Trouble Shooting Symptom Unit doesn’t respond (no power) iPod does not Possible Problem Solution AC adaptor isn’t plugged to a wall outlet or the connector is not plugged into the power supply jack on the back of the unit Plug the AC adaptor into a wall outlet and plug the connector into the supply jack on the unit Wall outlet is not functioning Plug another device into a wall outlet (same outlet) to confirm the outlet is working Make sure the dock insert is the proper fit to your iPod Remove your iP
Solucionando Problemas Síntoma La unidad no responde (no enciende) Causa Posible Solución Conecte el adaptador AC al tomacorrientes y el cable a la ficha de entrada de la unidad. El adaptador de AC no ha sido conectado a la corriente eléctrica o el cable no ha sido conectado a la parte posterior de la unidad. Conecte otro aparato al mismo tomacorrientes para verificar si se encuentra activo. El tomacorrientes no funciona.
Limited 90-Day Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.