Bluetooth Wireless Stereo Speaker System with USB Charging Manual

iBT25
Using the
3
P7
Setting Up the Unit
1. Connect the included AC adaptor to the DC
jack located on the back of the unit and
connect the other end to a working wall outlet.
Turning the Unit ON and OFF
1. Once the AC adaptor is properly connected,
press and hold the Power Button located on
top of the unit to turn the unit ON. The blue
power indicator on the front of the unit will light
and ascending tones will sound. Press the
Power Button again to enter standby, which
uses less power, but still allows normal
operation. The blue power indicator will pulse
slowly in standby mode. Note that if no audio
is detected within 3 minutes when power is on,
the unit automatically reverts to standby mode,
indicated by two tones.
2. Press and hold the Power Button for 2 seconds
to turn the unit OFF. Descending tones will
sound.
12V 2A
outlet