Model: iP38 (US English version) Print color : Black text on white paper Size of manual: 178mmW x 178mmH Date: Mar 15, 2010 P1 Model iP38 Portable Stereo Alarm Clock Speaker Case for your iPod® / iPhone® Questions? Visit www.ihomeaudio.
P2 Table Tableof of Contents Contents iP38 Quick Start 1 Controls and Indicators 2 Getting Started with your iP38 3 Using the iP38 4-5 A Consumer Guide to Product Safety 6 Trouble Shooting 7 Warranty Information 8 Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture.
P3 FCC Information This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits provide reasonable protection against radio and TV interference in a residential area.
P4 iP38 Quick Start 1:batteries 2:AC adaptor RESET R ESET TEST T EST Open battery compartment located inside unit. Insert 5 “AA” batteries (not included) as indicated on diagram. Unit can now play iPod/iPhone. Batteries will not charge iPod/iPhone. Connect AC adaptor to the DC jack (left side of iP38) and plug the other end into a working wall socket to charge and play iPod/iPhone. Does not charge batteries.
P5 Controls and Indicators Side Panel Speakers Front Panel AC Adaptor Jack Line-in Jack Battery Compartment Door Backup Battery Compartment (under door) Dock Time Set/Time Sync Button Snooze/Dimmer Button Display Button Power/Alarm Reset Button Volume “+” (raises volume) Alarm Button Volume “_” (lowers volume) Press display button to release catch and flip up display iP38 Display PM Indicator Alarm Indicator Battery backup Press display down for travel indicator 2 Time Display Battery Leve
P6 Getting Started with your iP38 Installing/Replacing Speaker Batteries FOR PORTABLE LISTENING When music becomes weak or distorted, change batteries 1. Open the battery compartment cover located inside the unit. 2. Insert 5 “AA” (LR6) batteries, checking the + and – ends of the batteries match the drawings inside the battery compartments. We recommend the use of alkaline batteries for longer life. Different types of batteries or new and used batteries are not to be mixed. 3.
P7 Using iP38 Setting Time and Clock Display Format 1. Press and hold the Button (located to the left of the display in the battery compartment) for 2 seconds until the display flashes. 2. Press + or – Button to select 12 Hour or 24 hour clock display format. Press the Button again for clock setting. 3. Press + or – Button to adjust to correct time. Hold the buttons for a few seconds to advance or reverse rapidly. Remember to set the correct AM or PM time.
P8 Using iP38 Alarm Time Cycle and Snooze Operation Alarm Time Cycle 1. When using AC power, the alarm time cycle is 1 hour. To save battery power, the alarm time cycle is shorter when using battery power (iPhone/iPod alarm cycle is 15 minutes and wake to buzzer is 3 minutes during battery operation). 2. Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again after 9 minutes. Snooze can be pressed several times during the alarm time cycle.
P9 A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P10 Trouble Shooting Symptom Unit doesn’t respond (no power) iPod/iPhone does not dock properly iPod/iPhone does not respond to the unit iPod/iPhone does not come on immediately Possible Problem Solution AC adaptor isn’t plugged into a wall outlet or the connector is not plugged into the power supply jack on the back of the dock Plug the AC adaptor into a wall outlet and plug the connector into the supply jack on the unit Wall outlet is not functioning or switched off Plug another device into the
P11 Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
P12 iP38-031510-A Printed in China
