Safety Instructions
iWBTW200 - Instruction Sheet - English
Color: Black text on white paper (1C + 1C)
Size: 102 W x 150 H mm
Material: 85gsm wood free paper
Oct 18, 2021 v10
Connect AC adapter to DC Jack, and plug into outlet.
WIRELESS CHARGING
Supports: Qi compatible phones (also works with plastic cases up to 3mm thick*)
Place Qi compatible device facing forward on the charging rest. Charging status will be
indicated on the LED located under the iHome badge:
Rapid blinking LED: Device is not charging (reposition device)
Slow blinking LED: Device is charging
Solid LED: Device is fully charged
Note: Qi status LED may continue to blink slowly (indicating charging) for iOS devices that are fully charged.
CAUTION: Not all cases are wireless charging compatible. Remove phone’s metal protective case before
charging. Do not place magnetic or metal objects on charger during charging.
* Some larger size phone cases may not be able to charge. (Please remove case to charge phone properly.)
REAR CONTROLS
DST Switch
(Daylight Savings)
USB Charging
(5V/1A)
DC Jack for power supply
(12V/2.7A)
Bluetooth Pairing Button/LED
- Press & Hold to enter pairing mode
- Select ‘iHome iWBTW200’ on your
device to connect
TIME SET
ALARM SET
- Press to Preview
- Press Again to Arm/Disarm
- To set alarm, press & hold until
display starts to flash
(adjust with +/- and press alarm
to confirm)
- To set clock, press & hold until
display starts to flash
(adjust with +/- and press
time to confirm)
- Repeat for year, month, date
* To toggle 12/24 hour time, press
Alarm Button while display is
flashing in time set mode
POWER
WIRELESS CHARGING REST
PLUS | MINUS
- Press + to increase volume/adjust settings
- Press - to decrease volume/adjust settings
PLAY/PAUSE
- Press to Play/Pause
audio or answer calls
- Press & Hold to end/
ignore calls
- Press & Hold to
activate Google/Siri
on paired device
Alarm
Indicator
Low Backup
Battery
Indicator
PM Indicator
Wireless Charging Status LED
- Press to Adjust Display Brightness Levels
- Press to Snooze when alarm is sounding
- Press & Hold to Adjust Snooze Duration
(adjust with +/- and press ZZZ to confirm)
- Press to Turn ON/OFF
- Press to stop sounding alarm/
reset for the next day
ZZZ (SNOOZE/DIMMER)
-1 +1 Auto
usb charging
Model: iWBTW200
APPLE WATCH CHARGER
Battery Backup Compartment
(for clock accuracy in the event of power failure)
*Before use, remove battery pull tab from
bottom panel.
Stand for iPhone Mini and other compact phones
Oct 18, 2021
Oct 18, 2021
iWBTW200_IS_101821-D
Printed in China
© 2021 SDI Technologies, Inc.
All rights reserved
For questions, full instructions, warranty, and additional
safety information, please scan the QR code or visit:
www.ihome.com/help/iwbtw200
FCC Information
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ISED Information
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la
conformité.
Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
Tout changement ou modification non expressément approuvé par la partie responsable de la conformité peut annuler l'autorité de l'utilisateur à utiliser
l'équipement.
CAN ICES-3 (B) / NMB-3(B), CAN RSS-216 / CNR-216
WARNING
• Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it
can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away
from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.”
• The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable”
• CAUTION - RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.
1 Do not use this product near water, and clean only with dry cloth.
2 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
3 Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other
appliances (including amplifiers) that produce heat.
4 Only use attachments/accessories specified by the manufacturer.
5 Unplug this product during lightning storms or when unused for long periods of time.
6 Damage Requiring Service – This product should be serviced by qualified service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in performance or does not operate normally.
7 No naked flame sources, such as lighted candles, should be placed on this product.
8 Attention should be drawn to the environmental aspects of battery disposal.
9 This product is suitable for use in tropical and/or moderate climates.
10 WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
11 Do not dispose of batteries in the household trash or fire.
TIMEBASE PRO+