Model: iDM8N1 (New Version) IB (English) Size: 153mm x 120mm Printing color: Black Date: July 25, 2013 P1 iDM8N1 portable rechargeable Bluetooth speaker instruction manual
P2 Introduction iDM8N1 Thank you for purchasing the iHome iDM8N1. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
P3 FCC Information FCC Radiation Exposure Statement iDM8N1 FCC ID: EMOIDM8N1 IC: 986B-IDM8N1 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Industry Canada RSS-210.
P4 iDM8N1 Table of Contents Meet Your iDM8N1....................................................................................................... 1-2 Charging the Unit.............................................................................................................3 Using Bluetooth:Pairing Your Device .....................................................................................4 Playing Audio Via Bluetooth.................................................................................
P5 iDM8N1 Meet Your iDM8N1 Left Side Right Side Power/Charging/Pairing Indicator Light Pairing Button Bottom Off/Bluetooth/Aux-in Switch Play/Pause Button Back Micro USB Charging Port Charging and AUX IN via iHome cable 1
P6 Included iDM8N1 • iDM8N1 system • Micro USB to USB/3.
Update by : July 25, 2013 Charging the Unit Using the P7 iDM8N1 1. Connect the micro USB plug to the micro USB charging port on the back of the unit. 2. Connect the standard USB plug end of the cable to a power USB port on a computer or other USB charging device that is connected to power. For first time use, charge unit for about 3 - 4 hours. 3. The amber light appears while the unit is charging and turns off when unit is fully charged.
Update by : July 25, 2013 Using Bluetooth: Pairing Your Device Using the P8 iDM8N1 NOTE: See the iDM8N1 Bluetooth Connection Guide for complete pairing details. 1. Move the Off/Bluetooth/Aux Switch to the Bluetooth position (center). The green and amber lights flash on front of the unit and it beeps twice to indicate auto-pairing attempt. 2. Turn on Bluetooth capability on your device and make it discoverable (see your device’s instructions to add or setup a Bluetooth device). 3.
P9 Playing Audio Via Bluetooth Using the iDM8N1 1. Move the Off/Bluetooth/Aux Switch to the Bluetooth position (center) to listen to audio streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device. The green light will flash slowly as the unit searches for a previously paired device, and then turn green when a previously paired device is detected. 2. Press the Play/Pause Button to play or pause audio from your Bluetooth device. NOTE: Play/Pause only works in Bluetooth mode.
P10 Playing Audio via Aux Using the iDM8N1 1. Connect the micro USB plug to the micro USB charging port on the back of the unit and connect the 3.5 mm audio plug to the headphone or line-out jack on your audio device. 2. Move the Off/Bluetooth/Aux Switch to the Aux position (right) to listen to audio via aux in. 3. Power on the audio device and place in play mode. 4. Use the controls on your device to navigate audio tracks and adjust volume. 5.
P11 Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself.
P12 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P13 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10.
Update by : July 25, 2013 Unit doesn’t respond (no power) P14 Troubleshooting • Make sure unit is completely charged. Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iDM8N1. • Make sure the Off/Bluetooth/Aux Switch is not in the Off (left) position. Resetting the Unit If the unit does not respond properly or appears to be “frozen”, you may wish to try resetting it.
P15 Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
