iP1 IB Booklet style - 16 pages Size: 102 x 150 mm Mat’l: 128gsm matte finish paper Color: White text on black background Jul. 6, 09.
W E L C O M E Thank you for choosing the iHome Studio Series featuring Bongiovi Acoustics DPS. This user guide will get you up and running quickly and provide helpful hints to maximize enjoyment. For more information about this and other iHome products, please visit www.ihomeaudio.
G E T T I N G S T A R T E D Place unit on a stable surface. Plug the power adaptor into the AC jack on back of the unit and the other end into a wall socket. Remove the remote control and other items from package. Component Video Out Line-in Line-in for plugging in other audio devices. For details, see page 6. Y PB PR Component video jacks for displaying videos on your iPod/iPhone to TV (cord not included) For details, see page 7. AC adaptor jack for powering unit.
M A I N C O N T R O L S Power Button: Turn unit on/off Bongiovi DPS: Turn DPS audio enhancement on/off Decrease volume B O N G I O V I Increase volume D P S The iHome Studio Series featuring Bongiovi Acoustics DPS (Digital Power Station) represents a genuine breakthrough in audio processing. This unique and powerful processor, years in the making, was developed by a team of audio engineers that have over 40 years of experience in the music and motion picture recording industries.
i P H O N E & i P O D Docking & Charging your iPhone or iPod Make sure your iPod/iPhone’s firmware is up to date via iTunes before use. Remove your iPod/iPhone from case or skin before docking. Carefully dock your iPod/iPhone onto the dock. Turn the Bumper Adjust Knob on the back of the unit until the bumper touches the back of your iPod/iPhone. Bumper should not push your iPod/iPhone too far forward. Your iPhone or iPod will charge while docked.
R E M O T E C O N T R O L Power on/off Turn shuffle on/off Turn repeat on/off iPod navigate “up” & “down” Play/pause Reverse track/fast reverse iPod navigate “menu” Forward track/fast forward menu Decrease volume iPod navigate “enter” Increase volume mute Turn Bongiovi DPS on/off Adjust bass level up/down enter bass Mute sound treble reset Adjust treble level up/down Reset treble and bass Installing/Replacing the Remote Control Battery The remote control battery is already installed at the
U S I N G L I N E - I N LINE-IN JACK Connect one end of a standard stereo 3.5mm audio cable (not included) into the line-in jack on the back of your iHome and the other into the headphone or output jack of your audio device. Turn the device on and press play. Press the Power Button on the unit to turn it on. Adjust volume on your audio device and the unit as needed. Do not play an line-in audio device and a docked iPhone or iPod at the same time or you will hear both sources.
Changed Date: Jul. 6, 09. V I D E O - O U T Your iHome is capable of outputting video stored on your iPod/iPhone to your television via the jacks on the rear. Depending on your model of iPod/iPhone, the supported video-out characteristics vary. See below. For component video, use the three jacks on rear Y PB PR For composite video, use only the center jack Y PB PR iPod classic, 3G iPod nano, 4G iPod nano, 2G iPod touch, iPhone 3GS: These iPod models can output progressive scan component video.
T R O U B L E S H O O T I N G Symptom Possible reason Solution Unit won’t turn on AC adaptor isn't plugged into a working wall socket or not plugged into the power jack on back of the unit Plug the AC adaptor into a working wall socket and plug the connector into the supply jack on the unit Unit won’t respond Unit may require a reset If unit is plugged in and doesn't respond, try resetting the unit by following these steps: a) remove iPhone/iPod from dock b) unplug unit from power source c) wait 3
T R O U B L E S H O O T I N G Symptom Possible reason Solution Remote control is not working Remote battery is weak Replace battery with a new one. Battery type: CR2032 pancake-type battery. Remote control is out of range Use remote within 30 feet and point at front of unit when using. Erratic performance External interference Move unit away from potential sources of external interference such as computers, modems, wireless devices (routers) or fluorescent light.
I M P O R T A N T S A F E T Y T I P S When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
A GUIDE TO PRODUCT SAFE T Y This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules.
L I M I T E D 1 Y E A R W A R R A N T Y iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
iP1IB-033009-1 ©SDI Technologies 2009 All rights Reserved Printed in China