User's Manual

ManualsBrandsiID DESKTOP smart USB 7.0 ManualsElectronicsRFID Desktop Style Read/Write Unit DESKTOP smart 7.0

iID

DESKTOP smart USB 7.0

User Manual

RFID Read/Write Device for transponders and sensors

The iID

DESKTOP smart USB 7.0 is a RFID device suitable for read/write of transponder and sensor units

working on HF (13.56MHz) frequency. It was designed for office and laboratory applications and is

particularly suitable for programming and evaluating TELID

sensor data loggers. The device is to be

powered using USB and works together with Windows. Exchanging of command and data with a PC will be

also done through the USB connector. Most of all established HF transponders and cards can be read and

written.

Product Short Description & available Versions:

iID

DESKTOP smart USB 7.0

Stationary HF RFID USB Read/Write module

CE, FCC, IC certified

System: iID

3000PRO, ISO 15693, ISO14443, all customized

Product Code: 35.29.701.00

Summary of content (7 pages)

PAGE 1
iID®DESKTOP smart USB 7.0 User Manual RFID Read/Write Device for transponders and sensors The iID® DESKTOP smart USB 7.0 is a RFID device suitable for read/write of transponder and sensor units working on HF (13.56MHz) frequency. It was designed for office and laboratory applications and is particularly suitable for programming and evaluating TELID ® sensor data loggers. The device is to be powered using USB and works together with Windows.
PAGE 2
iID®DESKTOP smart USB 7.0 User Manual FCC compliance statement These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. These devices may not cause harmful interferences; 2. These devices must accept any interference received, including interference that may cause undesired operation. The following figures list the Grant by FCC ID Number for each of the following devices: FCC ID: ZLCDESKTOPSHFX Please refer to the FCC’s website ( http://www.fcc.
PAGE 3
iID®DESKTOP smart USB 7.0 User Manual Performance description The iID® DESKTOP smart USB 7.0 is suitable for data capture and wireless RFID read / write applications, which can be connected via its integrated USB interface to PCs. Based on iID® SPC functionality, scripts can be used for definition of LED, as well as communication functionalities as RF, USB. The iID® DESKTOP smart USB 7.0 is a USB powered device.
PAGE 4
iID®DESKTOP smart USB 7.0 User Manual Software to be installed Please download and install iID® software package including iID® DEMOsoft 2013 or TELID®Soft 5, iID® interface config tool and iID® connection tool as well as iID® driver engine from: https://www.microsensys.de/downloads/CDContent/Install/Setup%20iID%c2%ae%20software%20package. exe Device configuration is possible using iID® interface configuration tool running on Windows PC environment - via BT connection as well as USB interface.
PAGE 5
iID®DESKTOP smart USB 7.0 User Manual Safety instructions • The device may only be used for the intended purpose designed by for the manufacturer. • Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized measures shall exclude any liability by the manufacturer.
PAGE 6
iID®DESKTOP smart USB 7.0 User Manual Technical data Following table contains general technical data. Parameter Description Housing Material Plastic case Dimension 88mm x 68mm x 11 mm Power supply USB (power supply) micro USB female, 5V +/- 5%, ripple <50mV Current consumption Idle mode typ. 34mA Active mode typ. 180mA RFID Interface Carrier frequency 13.56MHz +/- 7kHz Implemented standards ISO15693, ISO14443 RF output power 200 mW Antenna P13v2 Operating distance 0mm...
PAGE 7
iID®DESKTOP smart USB 7.0 User Manual Equipment delivered: 1 x iID® DESKTOP smart USB 7.0 Standard accessories: 1 x USB cable Complementary microsensys Documents Technical Datasheet: DESKTOPSmart700-HF xxx.pdf Product or System Documentation: DOC-iID SPC 01D.pdf Contact/Copyright Micro-Sensys GmbH • In der Hochstedter Ecke 2 • 99098 Erfurt • Germany phone: +49 (0) 361 59874-0 fax: +49 (0) 361 59874-17 e-mail: info@microsensys.de web: www.microsensys.