User's Manual

User Manual
01
Step 1 Power on
BLUETOOTH CONNECTION
Long press “ ” button 2 seconds, you will hear prompt tone of power on,
then the speaker will enter into Bluetooth pairing mode with the blue
indicator blinking.
Find “SoundCollar” in your bluetooth list and select it.
02
Step 2 Choose the device
Bluetooth
My device
SoundCollar
Step 3 Pairing success
The LED indicator keeps blue once pairing is done, then you can access
to music.
04
OPERATION DIRECTION
03
BLUETOOTH FUNCTION
AND LED INDICATOR
The default mode is Bluetooth pairing mode when
power on, blue LED ashes quickly
05
Blue LED will be normally on after connected successfully.
When it beyonds the range of bluetooth, blue LED will ash
quickly
When the battery power is less than 10%, speaker will
shut down with prompt tone
Bluetooth
Power On
Charging
Red LED indicator will ash quickly when battery level is
below 20%
Lower Battery
Red LED indicator will last long time when charging,
red LED indicator will turn on after full charge.
Low power
shut down
PRODUCT SPECIFICATION
3W x 2
5V / 0.5A
290g
07
06
08
FREQUENTLY ASKED QUESTIONS
Bluetooth Speaker
MP39417
800mAh
5-6 hours (70% Vol)
245x205x44.5mm
Bluetooth
Disconnect
or no any
operation
It will power o automatically when more than 10 minutes
When connected
successfully, if
cellphone is out
of bluetooth range
Speaker will get disconnected, Blue LED will ash, it will
connect automatically again when cellphone is back to
bluetooth range.
4.2
Volume Knob
Power button/ Multi -Function button
Long press 2 S for power on/o.
Short press when playing music for Play/Pause
When a call is coming, short press to answer/end a call;
short press twice to reject a call
Press 3 times to previous song, press 2 times to next song
Short press to turn on Siri
Long press to disconnect Bluetooth
1
3
3
3
1 2
Slide up to turn the Volume up, slide down to turn the Volume down
1
1
1
2 2
2
2
Indicator
3
1
2
Micro USB port
128g双铜单色双面印刷(折页) 尺寸80*80mm
Product Name
Model NO.
Bluetooth Version
Battery Capacity
Play Time
Charging Time
Driver Units
Charging Current
Product Size
Product Weight
3 hours
Power button/
Multi -Function button
(On/o button)
A: Please plug in the charger and try in a few minutes.
Q: Why will the speaker shut down automatically when it is working ?
Q: The speaker cannot connect the once-paired cellphone.
A: First, remove the speaker's pairing name from the cellphone’s Bluetooth list and then short
press the power button quickly to restart paring mode.
Q: What kind of charger should we use for the speaker?
Q: What if there is noise or discontinuous sound when playing?
Q: The speaker cannot be started up in a normal situation.
A: All common USB chargers can be used, while we suggest 5V/0.5A.
A: The speaker can be normally used within 10m under no obstruction environment. If it is
over 10m or with obstruction, there might be noise or discontinuous sound.
A: When there is no bluetooth pairing 10 minutes, the speaker will shut down automatically
to reduce power consumption.
*This speaker supports mobile phones and tablet PCs etc. Here this User Manual is illustrated based on
mobile phones.
Indicator