FF2 (iFF2-WS30) Use & Care Instructions
TABLE OF CONTENTS 1. Welcome to iio ......................... page 2 7. Operation ............................................ page 11 2. Product overview ..................... page 3 8. Energy saving tips ............................. page 13 3. Important safety notes ............ page 4 9. Cleaning .............................................. page 14 4. Installation ................................ page 6 10. Troubleshooting ................................. page 16 5. Product dimensions .......
PRODUCT OVERVIEW The images in this guide may differ from the actual components and accessories, which are subject to change without prior notice for product improvement purposes. NOTE: The appearance of components in the appliance may differ from model to model. This wine cooler is intended for cooling wine, beverages, and glasses at optimal temperatures. Appliance temperature may be changed by adjusting the control panel.
IMPORTANT SAFETY NOTES Always read and follow all safety messages. This appliance is not intended to be used as a built-in appliance. READ ALL INSTRUCTIONS BEFORE USE. Alert Symbol – will display WARNING or CAUTION beside the instruction. Messages with the Alert Symbol will inform you of the potential hazard, provide guidance for reducing the hazard, and inform of the possible outcome if the instruction is not followed.
CAUTION Appliance MUST be in a vertical position for 24 hours before being connected to power. Replace all appliance parts and panels before operation. To avoid injury two or more people are required to move and install the appliance. Never pick up or move the appliance by the door. Prop. 65 Warning for California Residents WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
INSTALLATION WARNING When using this appliance follow basic precautions to reduce the risk of electrical shock, explosion, fire, serious injury or death. Do not damage the refrigerant circuit. Only connect this product to a dedicated grounded electrical outlet rated for use with this product (110-120V~, 60Hz, AC only). It is the user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong (grounded) wall outlet.
UNPACK CHOOSE LOCATION LEVEL LEGS Remove the Packaging Remove tape and any temporary labels from your appliance before use. Do not remove any warning labels, the model and serial number labels, or the circuit diagram from the appliance as this will void the warranty. Carefully remove the protective plastic film on the doors and appliance body. If required, carefully use tweezers or other small instruments to start the peeling at the corners.
PRODUCT DIMENSIONS Your appliance should be installed on a flat and even floor. Keep the appliance level by adjusting the front leg levers. Dimensions and Clearances Check the dimensions of the appliance and the installation path to ensure there is sufficient room to move the appliance through doors or narrow openings. The installation location chosen for the appliance should allow space behind the unit for connections and airflow as well as space in front to open the doors.
REVERSING THE DOOR No. 1 2 3 4 5 6 Description Top cover screw Top cover Left upper hinge Left upper hinge screw Upper hinge screw Right upper hinge Qty 2 1 1 1 3 1 No. 7 8 9 10 11 12 Description Limit block Door screw Bottom hinge Bottom hinge screw Short front foot Long front foot Qty 1 1 1 2 1 1 Figure 1 Remove top cover screw ①. Push the rear of the top cover ② up above the top of the wine cooler and then push it forward to remove it.
Figure 3 Lay the door on a protected surface and ensure that the door seal does not get damaged. Remove door screw ⑧ and limit block ⑦. Install the limit block ⑦ into the corresponding hole on the other side of the door and affix the door screw ⑧. Figure 2 Remove the bottom hinge screw ⑩, short front foot ⑪, and long front foot ⑫. Remove the bottom hinge ⑨. Figure 4 Install the bottom hinge into the corresponding hole on the other side (left side) of the wine cooler.
OPERATION Before Use WARNING When the control is OFF, power is still supplied to the appliance. Disconnect the power before servicing or cleaning to prevent injury or death. If the appliance is unplugged, turned OFF, or has lost power, you must wait for 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the appliance may not start immediately.
Control Panel Display Depending on the model, some of the following functions may not be available. The control panel display may differ from model to model. Power key LED light Increase key Decrease key Digital display Auto Lock – No setting can be changed when the lock is activated. The lock is automatically activated 2 minutes after a setting is changed or there is no activity. When engaged, pressing any key will result in a 3 beep alarm.
Wood Shelves Wood shelves can be positioned to the desired height by the user. To reposition or remove a shelf gently slide out the shelf out towards you. Gently re-install the shelf at the desired position by reversing this step. Water Drain Port The water drain port at the rear of the appliance collects condensate from the rear wall of the appliance and funnels it down to the drain pan where it is then assists in the cooling process.
CLEANING WARNING Unplug the appliance from the power source before cleaning. Do not use large amounts of water or liquid when cleaning the appliance as this may affect electrical components, insulating properties of the appliance and the wooden shelves. CAUTION Do not use any detergents or flammable substances such as alcohol, thinner, bleach, or other flammable liquids to clean the appliance.
Water Drain Port The drain opening that collects moisture is located near the bottom of the appliance. When cleaning the appliance ensure that the opening is not clogged. Inspect and clean this frequently (i.e. with a plastic straw). Water Catch Basin There is a water catch basin located on top of the compressor for collecting excess water. When defrosting, water will flow from the appliance compartment through the defrost water drain down into the catch basin.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE OR REMEDY Appliance is connected but does not work: Cooling system operates continuously for extended periods of time: Ensure that the appliance is plugged in and there is power in the outlet. Confirm that circuit breaker or fuse has not tripped. Confirm that the digital display is ON and functioning Ambient temperature too high. Door opened frequently or for too long. Door not closed properly (misaligned, damaged or dirty door seals).
WARRANTY iio™ warrants this appliance will be free from defects in materials or workmanship for a period of TWO YEARS from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OR MERCHANT ABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Proof of purchase/original invoice may be required to claim warranty. Keep a photocopy easily accessible.
YOUR APPLIANCE INFORMATION To make it easier to request maintenance or warranty service, please record the following information and keep this manual near your appliance.
We do the utmost to ensure that the provided information is complete and accurate; however, images and specifications are subject to change without notice. Visit www.iiokitchen.com to download the latest version of the user manual.
