USER MANUAL ENGLISH DEUTSCH FRANCAIS Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured ENGLISH and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.
FCC DECLARATION OF CONFORMITY Model Number: Trade Name: PL1900 iiyama Responsible party: Address: Telephone number: IIYAMA North America, Inc. 65 West Street Road, Suite 101B, Warminster, PA 18974 U.S.A. 215-682-9050 including interference that may cause undesired operation. This device has been tested and found to comply with the limits for Class B Personal Computers and peripherals, pursuant to Part 15 of the FCC Rules.
TABLE OF CONTENTS ENGLISH FOR YOUR SAFETY .............................................................................. 1 SAFETY PRECAUTIONS ................................................................. 1 SPECIAL NOTES ON LCD MONITORS ............................................. 3 CUSTOMER SERVICE ...................................................................... 3 CLEANING ....................................................................................... 3 BEFORE YOU OPERATE THE MONITOR ..
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock. DO NOT PUT ANY OBJECT INTO THE MONITOR Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your monitor immediately and contact your dealer or iiyama service center.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION ENGLISH The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitors and do not indicate a problem. When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.
BEFORE YOU OPERATE THE MONITOR FEATURES 48cm (19.
HOW TO USE THE STAND The monitor is the design that a stand rotate.Be sure to rotate the stand before opearating the monitor, and rotate the stand upward before you re-box the monitor. CAUTION Install the Stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. 1. Lay the monitor flat on a table with front face down (see Fig 1).
ENGLISH CONTROLS AND CONNECTORS FRONT PANEL CONTROL 7 6 5 8 1 2 3 4 9 10 11 12 A Menu Button ( 1 ) B Scroll Down / Brightness Button ( C Scroll Up / Contrast Button ( ) ) D Select / Auto Button ( 2 ) E Power Indicator NOTE Green: Normal operation Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 2W when receiving no horizontal and/or vertical sync signal.
CONNECTING YOUR MONITOR A Ensure that both the computer and the monitor are switched off. B Connect the computer to the monitor with the signal cable.(See page 22 for CONNECTOR PIN ASSIGNMENT.) C Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. D Connect the Power Cable to the monitor first and then to the power supply. computer used. An incorrect connection may cause serious damage to both the monitor and the computer.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 21: COMPLIANT TIMING. Windows 95/98/2000/Me/XP Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 21. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 13 for SCREEN ADJUSTMENTS. ( Press the Menu Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the Main Menu SET ? Buttons.
ADJUSTMENT MENU CONTENTS Auto Adjust AUTO SET Auto Adjust Adjustment Item Auto Adjust * Problem / Option Direct Button to Press Adjust H. / V. Position, H.Size and Fine Tune automatically. ENGLISH Only Analog Input NOTE * The screen becomes dark for approximately five seconds during the adjustment. For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 13 for SCREEN ADJUSTMENTS.
Color Adjust Color Adjust Problem / Option Cool Bluish white (9300K) Normal Reddish white (6500K) Warm Greenish white (5400K) R (Red) G (Green) B (Blue) 2 User Color Information i Information H.Frequency: 79.99 kHz V. Frequency: 75.03 Hz P i x e l C l o c k : 135.
Setup Menu ? Setup Menu Adjustment Item ENGLISH Language Select Resolution Notice OSD NOTE Problem / Option Button to Press English Français Deutsch Español Italiano Disable English Suomi French German Spanish Italian The massege is turned off. Finnish Japanese Traditional Chinese Simplified Chinese Enable The message of "For best picture quality change resolution to 1280x1024" appears on the screen every 30 seconds when displaying less than 1280x1024. H.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.
C Press the Auto Button. (Auto Adjust) D Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH E Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. F 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps F and NOTE G because the H.Size may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again. Adjust the H.Position after the Fine Tune adjustment if the horizontal position moves during the adjustment. H Adjust the Brightness and Color Adjust to get the desired picture after you complete the H.Size and Fine Tune adjustments.
POWER MANAGEMENT FEATURE The power management feature of this product complies with power saving requirement of ENERGY STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. Problem ENGLISH 3.
ENGLISH Problem Check F No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The Mute is OFF. The audio output level of the audio equipment is within the specification of the monitor. G The sound is too loud or too quiet. The audio output level of the audio equipment is within the specification of the monitor. H A strange noise is heard. The Audio Cable is properly connected.
APPENDIX SPECIFICATIONS LCD Panel ProLite E1900S Driving system a-Si TFT Active Matrix Size Diagonal: 48.3cm / 19.0" Pixel pitch 0.294mm H × 0.294mm V Brightness 300cd/m2 (Typical) Contrast ratio 700 : 1 (Typical) Viewable angle Right / Left : 75 degrees each, Up:75 degrees, Down: 60 degrees (Typical) Response time 5ms (Black, white, black) Display Colors Approx.16.2M (6bit+2bit ditherring) Sync Frequency Horizontal: 30.0-80.
ENGLISH Model LCD Panel Driving system ProLite E1900SV a-Si TFT Active Matrix Size Diagonal: 48.3cm / 19.0" Pixel pitch 0.294mm H × 0.294mm V Brightness 250cd/m2 (Typical) Contrast ratio 600 : 1 (Typical) Viewable angle Right / Left : 70 degrees each, Up/ Down: 65degrees each (Typical) Response time 8ms (Black, white, black) Display Colors Approx.16.2M (6bit+2bit ditherring) Sync Frequency Horizontal: 30.0-80.
DIMENSIONS DIMENSIONS 71mm/2.8" 208mm/8.3" 467mm/18.7" 365mm/14.6" ENGLISH 411mm/16.4" 207mm/8.3" COMPLIANT TIMING Video Mode VGA 640 × 480 SVGA 800 × 600 VESA XGA 1024 × 768 SXGA 1280 × 1024 VGA TEXT Macintosh NOTE 720 × 400 640 × 480 832 × 624 Horizontal Frequency Vertical Frequency Dot Clock 31.468kHz 37.500kHz 35.156kHz 37.878kHz 46.875kHz 48.076kHz 48.362kHz 56.474kHz 60.024kHz 63.979kHz 79.974kHz 31.468kHz 35.000kHz 49.724kHz 59.941Hz 74.997Hz 56.249Hz 60.317Hz 75.001Hz 72.
CONNECTOR PIN ASSIGNMENT D-Sub mini 15pin ENGLISH Connector DVI-D 24pin Connector 1 8 16 24 9 17 DVI-D Pin Input Signal Input Signal Pin 1 Red video 9 +5V 2 Green video 10 Ground 3 Blue video 11 NC 4 NC 12 Data line (SDA)* 5 Ground 13 H-Sync 6 Red video ground 14 V-Sync 7 Green video ground 15 Clock line (SCL)* 8 Blue video ground * Compliant to VESA DDC. Pin Input Signal Input Signal Pin 1 T.M.D.S Data 2– 13 2 T.M.D.S Data 2+ 14 +5V 3 T.M.D.
