USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
Congratulations! The display you have just purchased carries the TCO Certified label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on the climate and our natural environment.
ENGLISH CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC Directive” , 2006/95/EC “Low Voltage Directive” and 2005/32/EC “EuP Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
TABLE OF CONTENTS FOR YOUR SAFETY.............................................................................................. 1 SAFETY PRECAUTIONS ................................................................................ 1 SPECIAL NOTES ON LCD MONITORS.......................................................... 3 CUSTOMER SERVICE .................................................................................... 3 CLEANING..............................................................................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor ENGLISH and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION MAINTAIN GOOD VENTILATION Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire.
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1280 × 1024 2 High Contrast 800:1 (Typical) , ACR Function Available / Brightness 250cd/m (Typical) / Quick Response Time 5ms (Typical) Digital Character Smoothing ENGLISH Automatic Set-up Stereo Speakers 2 × 1W Stereo Speakers Plug & Play VESA DDC2B Compliant Windows® 95/98/2000/Me/XP/Vista/7 Compliant ® Power Management (ENERGY STAR VESA DPMS Compliant) Ergonomic Design: TCO5.
FITTING AND REMOVAL OF BASE : ProLite B1906S The monitor is supplied complete with a stand-base. If you prefer to wall mount the monitor, please follow the instructions below to remove the stand-base. Be sure to include the stand with the monitor if it is necessary to return the unit. CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage.
FITTING AND REMOVAL OF BASE : ProLite E1906S CAUTION Install the stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before installation to avoid electric shock or damage. ENGLISH A Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
ENGLISH CONTROLS AND CONNECTORS : ProLite B1906S A Power Switch ( ) B Menu / Select Button (MENU) C + / Volume Button ( + ) D - / ECO Button ( - ) E Auto Button (AUTO) F Power Indicator NOTE Blue: Normal operation Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 1W when receiving no horizontal and/or vertical sync signal.
ENGLISH CONTROLS AND CONNECTORS : ProLite E1906S A Power Switch ( ) B Menu / Select Button (MENU) C + / Volume Button ( + ) D - / ECO Button ( - ) E Auto Button (AUTO) F Power Indicator NOTE Blue: Normal operation Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 1W when receiving no horizontal and/or vertical sync signal.
CONNECTING YOUR MONITOR : ProLite B1906S A Ensure that both the computer and the monitor are switched off. B Connect the computer to the monitor with the signal cable. C Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. D Connect the Power Cable to the monitor first and then to the power supply. E Power of the monitor and the computer is turned on.
CONNECTING YOUR MONITOR : ProLite E1906S A Ensure that both the computer and the monitor are switched off. B Connect the computer to the monitor with the signal cable. C Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. D Connect the Power Cable to the monitor first and then to the power supply. E Power of the monitor and the computer is turned on. computer used. An incorrect connection may cause serious damage to both the monitor and the computer.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 29: COMPLIANT TIMING. Windows 95/98/2000/Me/XP/Vista/7 Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP/Vista/7 by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied.
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1906S For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference. Hold the panel so that the monitor does not topple when you change the monitor’s height or angle. 110mm ENGLISH You are able to adjust the monitor's height up to 110mm, angle up to 170 degrees right and left, 20 degrees upward.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 29. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 20 for SCREEN ADJUSTMENTS. Press the MENU Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the + / - Buttons.
ADJUSTMENT MENU CONTENTS Luminance Luminance Contrast 50 Brightness 50 Eco Off Picture Mode Standard Adjustment Item Too intense Too dark Brightness * Picture Mode Button to Press Too dull Contrast Eco Problem / Option ENGLISH ON ACR Too bright Direct Off Normal Mode1 Mode2 Mode3 Standard Brightness of back-light is reduced. Brightness of back-light is reduced more than Mode1. Brightness of back-light is reduced more than Mode2.
Image Setup Image Setup Only Analog Input ENGLISH Adjustment Item Clock* Phase* H. Position V. Position * 15 Clock Phase 50 H.Position 50 V.Position 50 Problem / Option Too narrow Too wide To correct flickering text or lines Too left Too right Too low Too high See page 20 for SCREEN ADJUSTMENTS.
Color Temp. Color Temp. Gamma Mode1 Color Temp. Warm 50 User-R Gamma 50 User-B 50 Problem / Option Mode1 Mode2 Mode3 Warm Normal Cool Color Temp. User sRGB Button to Press ENGLISH Adjustment Item User-G Normal Dark High contrast Greenish white Yellowish white Bluish white User-R User-G User-B sRGB Too weak Too strong NOTE sRGB is an international standard which defines and unifies the difference of color appearance between equipment.
OSD Setup OSD Setup H.Position 50 V.Position 50 Timeout 50 Language ENGLISH Adjustment Item H.Position V.Position English Problem / Option Button to Press OSD is too left OSD is too right OSD is too low OSD is too high Timeout You can set the OSD display duration time between 5 and 60 seconds.
Others Others Reset Yes Signal Select Auto Adjustment Item Signal Select NOTE Problem / Option Yes Reset Direct 800(H)＊600(V) 38KHz 60Hz Button to Press ENGLISH Information Resolution : H.Frequency : V.Frequency : Factory-preset data is restored. No Return to Menu. Auto Select the signal input automatically. D-sub DVI-D Select the Analog input. Select the Digital input.
Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. Volume: Press the + Button when the Menu is not displayed. Adjustment Item ENGLISH Volume Problem / Option Button to Press Too soft Too loud Only Analog Input Auto Adjust: Press the Auto Button when the Menu is not displayed. Adjustment Item Auto Adjust * * Button to Press Adjust H. / V. Position, Clock and Phase automatically.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.
C Press the Auto Button. (Auto Adjust) D Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH E Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. F 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps F and NOTE G because the Clock may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again. Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment. H Adjust the Brightness and Color to get the desired picture after you complete the Clock and Phase adjustments.
POWER MANAGEMENT FEATURE The power management feature of this product complies with power saving requirement of ENERGY STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. Problem ENGLISH 3.
ENGLISH Problem Check F No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The Mute is OFF. The audio output level of the audio equipment is within the specification of the monitor. G The sound is too loud or too quiet. The audio output level of the audio equipment is within the specification of the monitor. H A strange noise is heard. The Audio Cable is properly connected.
APPENDIX Size Category 19" LCD Panel a-Si TFT Active Matrix Driving system Size Diagonal: 19" (48cm) Pixel pitch 0.294mm H × 0.294mm V Brightness 250cd/m2 (Typical) Contrast ratio 800 : 1 (Typical), ACR Function Available Viewable angle Right / Left : 80 degrees each, Up : 75 degrees, Down: 80 degrees (Typical) Response time 5ms (Black, White, Black) Display Colors Approx.16.7M Sync Frequency Analog: Horizontal: 24.0-80.0kHz, Vertical: 55-75Hz Digital: Horizontal: 30.0-80.
SPECIFICATIONS : ProLite E1906S Size Category ENGLISH LCD Panel 19" Driving system a-Si TFT Active Matrix Size Diagonal: 19" (48cm) Pixel pitch 0.294mm H × 0.294mm V Brightness 250cd/m2 (Typical) Contrast ratio 800 : 1 (Typical), ACR Function Available Viewable angle Right / Left : 80 degrees each, Up : 75 degrees, Down: 80 degrees (Typical) Response time 5ms (Black, White, Black) Display Colors Approx.16.7M Sync Frequency Analog: Horizontal: 24.0-80.
DIMENSIONS : ProLite B1906S 409.0mm/16.1" 378.5mm/14.9" ( ): Maximum adjustment range DIMENSIONS : ProLite E1906S 409.0mm/16.1" 378.5mm/14.9" 211.5mm/8.3" 412.5mm/16.2" 303.0mm/11.9" 352.0mm/13.9" 59.0mm/2.3" APPENDIX 28 ENGLISH 249.5mm/9.8" 303.0mm/11.9" 352.0mm/13.9" 415.0mm/16.3" (525.0mm/20.7") 59.0mm/2.
COMPLIANT TIMING Video Mode ENGLISH VGA VESA SVGA XGA SXGA Macintosh PC9801 640 × 480 800 × 600 1024 × 768 1280 × 1024 Horizontal Frequency Vertical Frequency Dot Clock 31.469kHz 59.940Hz 25.175MHz 37.500kHz 75.000Hz 31.500MHz 37.861kHz 72.809Hz 31.500MHz 35.156kHz 56.250Hz 36.000MHz 37.879kHz 60.317Hz 40.000MHz 46.875kHz 75.000Hz 49.500MHz 48.077kHz 72.188Hz 50.000MHz 48.363kHz 60.004Hz 65.000MHz 56.476kHz 70.069Hz 75.000MHz 60.023kHz 75.029Hz 78.750MHz 63.
