USER MANUAL ENGLISH DEUTSCH FRANÇAIS Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
iiyama | Servicecard Dear user, we congratulate you on the purchase of your iiyama LCD. All iiyama LCD monitors comply with the ISO13406-2 standard for pixel defects. For details on warranty and locally used pixel policies that apply directly after installation of your product please check the iiyama website. In case of a defect, please call your local support hotline.
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/ EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas,business and light industrial premises and ENGLISH small-scale enterprises, inside as well as outside of the buildings.
ENGLISH TABLE OF CONTENTS FOR YOUR SAFETY............................................................................... SAFETY PRECAUTIONS................................................................. SPECIAL NOTES ON LCD MONITORS........................................... CUSTOMER SERVICE..................................................................... CLEANING........................................................................................ 1 1 3 3 3 BEFORE YOU OPERATE THE MONITOR........
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
BEFORE YOU OPERATE THE MONITOR FEATURES 66cm (26") TFT Color LCD Monitor Supports Resolutions up to 1920 × 1200 ENGLISH High Contrast 1000:1 , ACR Function Available/ High Brightness 300cd/m2 / Quick Response Time 2ms (Gray to Gray) Stereo Speakers 2 × 5W Stereo Speakers HDMI interface:ProLite E2607WS Plug & Play VESA DDC1/2B Compliant Windows® 95/98/2000/Me/XP/Vista Compliant Power Management (ENERGY STAR® VESA DPMS Compliant) VESA Mounting Standard (200mm x 100mm) Compliant CHECKING THE
HOW TO USE THE STAND The monitor is shipped with the stand detached. Be sure to attach the stand before operating the display and remove if it is necessary to re-box. CAUTION Install the Stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before installation to avoid electric shock or damage. (Fig 1) (Fig 2) (Fig 3) (Fig 4) BEFORE YOU OPERATE THE MONITOR ENGLISH 1.
ENGLISH CONTROLS AND CONTROL CONNECTORS FRONT PANEL 11 12 13 Menu / Input Select shortcut keys ( 1 )*1 Scroll Down / Brightness/Contrast/ACR/ECO shortcut keys() Scroll Up / OptiColor Mode ()*4 Select / Input select ( 2 ) Power Indicator Normal operation NOTE Blue: Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 2W when receiving no horizontal and/ or vertical sync signal.
CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer.
ENGLISH COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 22: COMPLIANT TIMING. Windows 95/98/2000/Me/X������������� P/Vista Plug �� & ���� Play The iiyama LCD monitor complies with DDC1/2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP/Vista by co��������������������������������������������������� nnecting the monitor to DDC1/2B compliant computer with the Signal Cable supplied.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 21. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 14 for SCREEN ADJUSTMENTS. Press the Menu Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the / Buttons.
ADJUSTMENT MENU CONTENTS Auto Image Adjust Adjustment Item ENGLISH Auto Image Adjust * Only Analog input Problem / Option Button to Press Adjust H. / V. Position, H.Size and Fine Tune automatically. NOTE The screen becomes dark for approximately five seconds during the adjustment. * For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 14 for SCREEN ADJUSTMENTS.
Input Select* Input Select Adjustment Item Problem / Option Button to Press Analog Select the Analog input Input Select HDMI Select the HDMI input DVI Select the DVI input You can display the Input Select Menu by pressing the 1 button under no signal input. *Available for ProLite E2607WS only. Audio Adjust Adjustment Item Problem / Option Too soft Too loud Volume Return the sound volume to the previous level. Turn off the sound temporarily.
Manual Image Adjust Adjustment Item Problem / Option Too narrow Too wide Horizontal Size H. Position Too far to the left Too far to the right V. Position Too low Too high ENGLISH H./V. Position Fine Tune To correct flickering text or lines Sharpness Adjust the picture quality at resolutions of less 1920 x 1200. You can change the picture quality (4 steps).
Setup Menu Language Select Problem / Option English Français Deutsch Espanol Italiano English French German Spanish Italian H.Position OSD is too far to the left OSD is too far to the right V.Position OSD is too low OSD is too high OSD Position OSD Time Out Button to Press Suomi 日本語 简体中文 繁体中文 Finnish Japanese Simplified Chinese Traditional Chinese ENGLISH Adjustment Item You can set the OSD display duration time between 5 and 60 seconds.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. ENGLISH The monitor is designed to provide the best performance at resolution of 1920 × 1200, but can not provide the best at resolutions of less than 1920 × 1200 because the picture is automatically stretched to fit the full screen.
Press the Auto Button. (Auto Adjust) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
Adjust the Fine Tune to correct horizontal wavy noise, flicker or blur in the zebra pattern. ENGLISH NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps and NOTE because the H.Size may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again. Adjust the H.Position after the Fine Tune adjustment if the horizontal position moves during the adjustment.
POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 2W. The screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. ENGLISH 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3.
Problem Check The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The Mute is OFF. The audio output level of the audio equipment is within the specification of the monitor. The sound is too loud or too quiet. The audio output level of the audio equipment is within the specification of the monitor. A strange noise is heard. The Audio Cable is properly connected. ENGLISH No sound.
APPENDIX SPECIFICATIONS:ProLite E2607WS ENGLISH LCD Panel Size Pixel pitch Diagonal: 66cm / 26" 0.2865 mm H × 0.2865mm V Brightness 300cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), ACR function available Viewable angle Right / Left : 85 degrees each, Up:80 degrees, Down: 70 degrees (Typical) Response time 2ms (Gray to Gray) Display Colors Approx.16.7M Sync Frequency Horizontal: 31.0-80.
APPENDIX LCD Panel Size Diagonal: 66cm / 26" Pixel pitch 0.2865 mm H × 0.2865mm V Brightness 300cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), ACR function available Viewable angle Right / Left : 85 degrees each, Up:80 degrees, Down: 70 degrees (Typical) 2ms (Gray to Gray) Response time Display Colors Approx.16.7M Sync Frequency Horizontal: 31.0-80.
ENGLISH DIMENSIONS DIMENSIONS COMPLIANT TIMING PC Input Video Mode VGA 640 × 480 SVGA 800 × 600 XGA 1024 × 768 SXGA 1280 × 1024 VESA WXGA+ 1440 ×900 UXGA 1600 ×1200 WSXGA+ 1680 ×1050 WUXGA 1920 ×1200 VGA TEXT 720 × 400 NOTE * DVI, HDMI Input is not compliant. Video input 480P/720P/1080i/1080P 22 APPENDIX Horizontal Frequency Vertical Frequency Dot Clock 31.469kHz 37.500kHz 37.879kHz 48.077kHz 46.875kHz 48.363kHz 56.476kHz 60.023kHz 63.981kHz 79.976kHz 55.935kHz 70.635kHz 75.000kHz 65.