USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
TABLE OF CONTENTS FOR YOUR SAFETY............................................................................1 SAFETY PRECAUTIONS................................................................1 SPECIAL NOTES ON LCD MONITORS .........................................3 ENGLISH CUSTOMER SERVICE ...................................................................3 CLEANING ......................................................................................3 BEFORE YOU OPERATE THE MONITOR ....................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1920 × 1080 High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness 250cd/m2 (Typical) ENGLISH Blue Light Reducer Digital Character Smoothing Automatic Set-up Stereo Speakers 2 × 2W Stereo Speakers Plug & Play VESA DDC2B Compliant Windows® Vista/7/8/8.
FITTING AND REMOVAL OF BASE CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down. Hold the monitor and push the Stand-Base.
ENGLISH CONTROLS AND CONNECTORS Power Switch ( ) Power Indicator NOTE Blue: Normal operation Orange: Power Management Input / Select Button ( ) Scroll up / Audio Adjust Button ( Scroll down / i-Style Color Button ( Menu Button ( ) ) ) Speakers Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed without your permission.
CONNECTING YOUR MONITOR NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office. For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama office for a suitable adaptor.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 24: COMPLIANT TIMING. TOUCH support operation system ENGLISH Mouse Gestures*1 Digitizer Windows8/8.1/10 Windows7 Windows Vista Windows XP Mac OS/OS X Linux Android Functions Click Drag Double-Click Mouse function Right-Click Flick Visual feedback Mouse & Digitizer functions Press & Tap, Rotate, Zoom-in/out The other OS Versions not listed are not supported.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 24. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 17 for SCREEN ADJUSTMENTS. Press the Button to start the On Screen Display (OSD) feature. There are / Buttons.
ADJUSTMENT MENU CONTENTS Auto Image Adjust Auto Image Adjust Only Analog Input Adjustment Item ENGLISH Auto Image Adjust * Direct Problem / Option Button to Press Adjust H. / V. Position, Clock and Phase automatically. * For best results, use the Auto Image Adjust in conjunction with the adjustment pattern. See page 17 for SCREEN ADJUSTMENTS. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations.
Picture Adjust Picture Adjust Problem / Option Contrast *3 Too dull Too intense Brightness *1,2,3 Too dark Too bright Adv. Contrast *2,3,4 ECO Mode * Overdrive 3 Off Typical Contrast Ratio On Increased Contrast Ratio Button to Press ENGLISH Adjustment Item Off Normal 1 Brightness of back-light is reduced. 2 Brightness of back-light is reduced more than 1. 3 Brightness of back-light is reduced more than 2.
Input Select Direct Adjustment Item Problem / Option ENGLISH Button to Press VGA Select the VGA input. HDMI Select the HDMI input. DispalyPort Select the DispalyPort input. Search for an available input source and select Auto automatically. Input Select NOTE Input Select Input source is fixed, not selected automatically when VGA, HDMI and DispalyPort which are selected. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations.
Color Adjust Color Adjust Problem / Option Cool Bluish white Normal Greenish white Warm Reddish white User Color Red Green Blue Off Standard i-Style Color Direct Game Button to Press Too weak Too strong Return to a state set by color adjustment except i-Style Color. For general windows environment and monitor default setting. For PC game environment. Cinema For movie and video environment.
Manual Image Adjust Adjustment Item Manual Image Adjust Problem / Option Button to Press H. Position Too left Too right V. Position Too low Too high ENGLISH H./V. Position *1,2 Too narrow Too wide Clock *1 Phase *1 To correct flickering text or lines 1/2/3/4/5 Sharpness Video Mode Adjust Blue Light Reducer *4 Direct X-Res Technology You can change the picture quality from 1 to 5 (soft to sharp).
Setup Menu Language Select Problem / Option English Français Deutsch Nederlands Polski Česky English French German Dutch Polish Czech OSD H.Position OSD is too left OSD is too right OSD V.Position OSD is too low OSD is too high Button to Press Italian Italiano Русский Russian Japanese Simplified Chinese Traditional Chinese ENGLISH Adjustment Item Setup Menu OSD Position OSD Time Out OSD Background * Opening Logo * LED * NOTE You can set the OSD display duration time.
● Lock Mode 1. The OSD lock will be activated by pressing the front buttons and for about 5 seconds. If you try to access the OSD by pressing any of the buttons , , and , message "OSD Locked" will appear on the screen. and again for 5 seconds. 2. The OSD lock will be deactivated by pressing the front buttons ENGLISH 1. The power switch lock will be activated by pressing the front buttons and for 5 seconds.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.
Pressing and holding of the Button for about 2 seconds. (Auto Image Adjust) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Image Adjust. ENGLISH Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
NOTE and In case the strong flicker or blurs remain on a part of the screen, repeat steps because the Clock may not be adjusted correctly. If the flicker or blurs still remain, again. set the refresh rate of computer to low (60Hz) and repeat steps from Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment. Adjust the Brightness and Color to get the desired picture after you complete the Clock and Phase adjustments. Put back your favorite wallpaper.
POWER MANAGEMENT FEATURE ENGLISH The power management feature of this product complies with power saving requirement of VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below. The power management function, including any timer settings is configured by the operating system.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. Problem Check The picture does not appear. (Power indicator The Power Cable is firmly seated in the socket.
ENGLISH Problem Check No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The Mute is OFF. The audio output level of the audio equipment is within the specification of the monitor. The sound is too loud or too quiet. The audio output level of the audio equipment is within the specification of the monitor. A strange noise is heard. The Audio Cable is properly connected.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS Technology Projected capacitive Light transmission 85% Communication system Size Category LCD Panel USB 22" Panel technology IPS Panel Technology Size Diagonal: 21.5" (54.6cm) Pixel pitch 0.248mm H × 0.248mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv.
DIMENSIONS 490.5mm/19.5” 484.5mm/19.1” 220.5mm/8.7” 370.5mm/14.6” 235.5mm/9.3” ENGLISH 272.5mm/10.7” 296.0mm/11.7” 48.0mm/1.9” COMPLIANT TIMING Video Mode VESA VGA 640 × 480 SVGA 800 × 600 XGA 1024 × 768 SXGA 1280 × 1024 WXGA+ 1440 × 900 WSXGA+ Full HD 1680 × 1050 1920 × 1080 Horizontal Frequency 31.469kHz 37.500kHz 37.861kHz 35.156kHz 37.879kHz 46.875kHz 48.363kHz 56.476kHz 60.023kHz 63.981kHz 79.976kHz 55.935kHz 70.635kHz 65.290kHz 66.590kHz Vertical Frequency 59.940Hz 75.000Hz 72.
