USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2004/108/EC “EMC Directive”, 2006/95/EC “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
TABLE OF CONTENTS FOR YOUR SAFETY............................................................................1 SAFETY PRECAUTIONS................................................................1 SPECIAL NOTES ON LCD MONITORS .........................................3 ENGLISH CUSTOMER SERVICE ...................................................................3 CLEANING ......................................................................................3 BEFORE YOU OPERATE THE MONITOR ....................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1280 × 1024 High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness 250cd/m2 (Typical) ENGLISH Quick Response Time 5ms (Typical) Digital Character Smoothing Automatic Set-up Stereo Speakers 2 × 1W Stereo Speakers Plug & Play VESA DDC2B Compliant Windows® XP/Vista/7/8/8.
WALL MOUNTING When you use with the wall mounting, in consideration of thickness of the mounting WARNING stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor. Please check if the wall or ceiling can support the weight of the monitor before mounting it.
FITTING AND REMOVAL OF BASE : ProLite B1780SD CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. ENGLISH Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
FITTING AND REMOVAL OF BASE : ProLite E1780SD CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
ENGLISH CONTROLS AND CONNECTORS : ProLite B1780SD Power Switch ( POWER) Power Indicator NOTE Blue: Normal operation Orange: Power Management Select / Input Button ( ) Scroll Up / Audio Adjust Button ( ) Scroll Down / i-Style Color Button ( ) Menu Button ( ) Speakers VGA(D-sub) mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DVI-D) Audio Connector (AUDIO IN) Cable Holes AC Connector (AC IN) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the moni
ENGLISH CONTROLS AND CONNECTORS : ProLite E1780SD Power Switch ( POWER) Power Indicator Normal operation NOTE Blue: Orange: Power Management Select / Input Button ( ) Scroll Up / Audio Adjust Button ( ) Scroll Down / i-Style Color Button ( ) Menu Button ( ) Speakers VGA(D-sub) mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DVI-D) Audio Connector (AUDIO IN) Installation hole of Cable Holder AC Connector (AC IN) Keyhole for Security Lock NOTE You can fasten a security lock and cab
CONNECTING YOUR MONITOR : ProLite B1780SD Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power supply. Turn on your monitor and computer. ENGLISH NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used.
CONNECTING YOUR MONITOR : ProLite E1780SD NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 30: COMPLIANT TIMING. ENGLISH ADJUSTING THE VIEWING ANGLE : ProLite E1780SD For optimal viewing it is recommended to look at the full face of the monitor. Hold the stand so that the monitor does not topple when you change the monitor’s angle. You are able to adjust the monitor’s angle up to 20° upward.
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1780SD For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference. Hold the panel so that the monitor does not topple when you change the monitor’s height or angle. 130mm ENGLISH You are able to adjust the monitor's height up to 130mm, angle up to 45 degrees right and left, 22 degrees upward and 2 degrees downward.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 30. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 21 for SCREEN ADJUSTMENTS. Press the Button to start the On Screen Display (OSD) feature. There are additional Menu items which can be switched by using the / Buttons.
ADJUSTMENT MENU CONTENTS Auto Image Adjust Auto Image Adjust Only Analog Input Adjustment Item Direct Button to Press Adjust H. / V. Position, Clock and Phase automatically. * For best results, use the Auto Image Adjust in conjunction with the adjustment pattern. See page 21 for SCREEN ADJUSTMENTS. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. Auto Image Adjust: Pressing and holding of the not displayed.
Input Select Direct Adjustment Item Input Select Problem / Option VGA DVI Input Select ENGLISH NOTE Auto Button to Press Select the VGA input. Select the DVI input. Search for an available input source and select automatically. Input source is fixed, not selected automatically when VGA and DVI which are selected. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations.
Color Adjust Color Adjust Problem / Option Cool Bluish white Normal Greenish white Warm Reddish white User Color Red Green Blue Off Standard i-Style Color Direct Game Button to Press Too weak Too strong Return to a state set by color adjustment except i-Style Color. For general windows environment and monitor default setting. For PC game environment. Cinema For movie and video environment.
Manual Image Adjust Adjustment Item Manual Image Adjust Problem / Option Button to Press H. Position Too left Too right V. Position Too low Too high ENGLISH H./V. Position *1,2 Clock *1 Phase *1 Too narrow Too wide To correct flickering text or lines 0123 Sharpness You can change the picture quality from 0 to 3 (soft to sharp). Press the Button to change the picture quality in numerical Button to change the picture quality in order. Press the reverse numerical order.
Setup Menu Language Select Problem / Option English Français Deutsch Nederlands Polski English French German Dutch Polish H.Position OSD is too left OSD is too right V.Position OSD is too low OSD is too high Button to Press Русский Russian Japanese Simplified Chinese Traditional Chinese ENGLISH Adjustment Item Setup Menu OSD Position OSD Time Out OSD Background* Opening Logo* LED* NOTE You can set the OSD display duration time.
● Lock Mode 1. The OSD lock will be activated by pressing the front buttons and you try to access the OSD by pressing any of the buttons , , Locked" will appear on the screen. 2. The OSD lock will be deactivated by pressing the front buttons and for about 10 seconds. If and , message "OSD again for 10 seconds. ENGLISH 1. The power switch lock will be activated by pressing the front buttons and for 10 seconds.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to the screen enlargement process.
Pressing and holding of the displayed. (Auto Image Adjust) Button for about 2 seconds when the Menu is not Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
NOTE and In case the strong flicker or blurs remain on a part of the screen, repeat steps because the Pixel Clock may not be adjusted correctly. Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment. Adjust the Brightness and Color to get the desired picture after you complete the Pixel Clock and Phase adjustments. Put back your favorite wallpaper.
POWER MANAGEMENT FEATURE ENGLISH The power management feature of this product complies with power saving requirement of ENERGY STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below.
TROUBLE SHOOTING 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
ENGLISH Problem Check The screen is shaking. The power voltage is within the specification of the monitor. The signal timing of the computer is within the specification of the monitor. No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The Mute is OFF. The audio output level of the audio equipment is within the specification of the monitor.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite B1780SD Size Category 17" Panel Technology TN Size Diagonal: 17" (43cm) Pixel pitch 0.264mm H × 0.264mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 85 degrees each, Up / Down : 80 degrees each (Typical) Response time 5ms (Typical) Display Colours Approx. 16.7M Sync Frequency Analog: Horizontal: 24.0-80.
SPECIFICATIONS : ProLite E1780SD Size Category ENGLISH LCD Panel 17" Panel Technology TN Size Diagonal: 17" (43cm) Pixel pitch 0.264mm H × 0.264mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 85 degrees each, Up / Down : 80 degrees each (Typical) Response time 5ms (Typical) Display Colours Approx. 16.7M Sync Frequency Analog: Horizontal: 24.0-80.0kHz, Vertical: 55-75Hz Digital: Horizontal: 30.0-80.
DIMENSIONS : ProLite B1780SD 370.0mm/14.6” 339.5mm/13.4” 250.0mm/9.8” ) : Maximum adjustment range DIMENSIONS : ProLite E1780SD 370.0mm/14.6” 339.5mm/13.4” 178.0mm/7.0” 379.5mm/14.9” 272.0mm/10.7” 322.0mm/12.7” 48.5mm/1.9” 205.0mm/8.1” APPENDIX 29 ENGLISH ( 230.0mm/9.1” 272.0mm/10.7” 322.0mm/12.7” 399.5mm/15.7”(529.5mm/20.8”) 48.5mm/1.
COMPLIANT TIMING Video Mode VGA ENGLISH VESA SVGA XGA SXGA PC9801 640 × 480 800 × 600 1024 × 768 1280 × 1024 640 × 400 Horizontal Frequency Vertical Frequency Dot Clock 31.469kHz 59.940Hz 25.175MHz 37.500kHz 75.000Hz 31.500MHz 37.861kHz 72.809Hz 31.500MHz 35.156kHz 56.250Hz 36.000MHz 37.879kHz 60.317Hz 40.000MHz 46.875kHz 75.000Hz 49.500MHz 48.363kHz 60.004Hz 65.000MHz 56.476kHz 70.069Hz 75.000MHz 60.023kHz 75.029Hz 78.750MHz 63.981kHz 60.020Hz 108.000MHz 79.
