USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
Congratulations! for Sustainable IT TCO Certified is an international third party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect environmental, social and economic responsibility. Every TCO Certified product model is verified by an accredited independent test laboratory.
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2004/108/EC “EMC Directive”, 2006/95/EC “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
FOR YOUR SAFETY..........................................................................1 SAFETY PRECAUTIONS..............................................................1 SPECIAL NOTES ON LCD MONITORS .......................................3 CUSTOMER SERVICE .................................................................3 CLEANING ....................................................................................3 BEFORE YOU OPERATE THE MONITOR ........................................4 FEATURES........
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION ENGLISH The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1600 × 900 High Contrast 1000:1 (Typical), Adv.
WALL MOUNTING When you use with the wall mounting, in consideration of thickness of the mounting WARNING stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor. Please check if the wall or ceiling can support the weight of the monitor before mounting it.
FITTING AND REMOVAL OF BASE : ProLite B2080HSD ENGLISH CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
FITTING AND REMOVAL OF BASE : ProLite E2080HSD CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. ENGLISH Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
ENGLISH CONTROLS AND CONNECTORS : ProLite B2080HSD Power Switch ( ) Menu Button (MENU) + / Volume Button ( + / ) Power Indicator Normal operation NOTE Blue: Orange: Power Management - / ECO Button ( - / ) Auto Button (AUTO) Speakers D-SUB mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DVI) Audio Connector ( ) AC Connector (AC IN) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed without your permission.
ENGLISH CONTROLS AND CONNECTORS : ProLite E2080HSD Power Switch ( ) Menu Button (MENU) + / Volume Button ( + / ) Power Indicator Normal operation NOTE Blue: Orange: Power Management - / ECO Button ( - / ) Auto Button (AUTO) Speakers D-SUB mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DVI) Installation hole of Cable Holder Audio Connector ( ) AC Connector (AC IN) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed
CONNECTING YOUR MONITOR : ProLite B2080HSD Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power supply. Turn on your monitor and computer. ENGLISH NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used.
CONNECTING YOUR MONITOR : ProLite E2080HSD NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 30: COMPLIANT TIMING. ENGLISH ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite E2080HSD For optimal viewing it is recommended to look at the full face of the monitor. Hold the stand so that the monitor does not topple when you change the monitor’s angle. You are able to adjust the monitor’s angle up to 21° upward, 4° downward.
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B2080HSD For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference. Hold the panel so that the monitor does not topple when you change the monitor’s height or angle. You are able to adjust the monitor's height up to 130mm, angle up to 160 degrees right and left, 22 degrees upward and 5 degrees downward.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 30. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 21 for SCREEN ADJUSTMENTS. Press the MENU Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the + / - Buttons.
ADJUSTMENT MENU CONTENTS Luminance Luminance Contrast 50 Brightness 50 Eco Standard Adv. Contrast ON Problem / Option Contrast Too dull Too intense Brightness * Too dark Too bright Eco Off Mode1 Mode2 Mode3 i-Style Color Adv. Contrast Direct Button to Press Normal Brightness of back-light is reduced. Brightness of back-light is reduced more than Mode1. Brightness of back-light is reduced more than Mode2. For general windows environment and monitor Standard default setting.
Image Setup Image Setup Clock 50 Phase 50 H.Position 50 50 V.Position Aspect ENGLISH Adjustment Item Problem / Option Too narrow Too wide Clock*1,2 Phase*1,2 Full To correct flickering text or lines H. Position*2 Too left Too right V. Position*2 Too low Too high Aspect Full Expansion display Aspect Expansion display of Aspect *1 See page 21 for SCREEN ADJUSTMENTS. *2 Only Analog Input.
Color Temp. Color Temp. Gamma Mode1 Color Temp. Warm 50 Adjustment Item Gamma User-G 50 User-B 50 Problem / Option Mode1 Mode2 Mode3 User Color Temp. Warm Normal Cool sRGB Button to Press Normal High contrast Dark User-R Too weak User-G Too strong User-B Greenish white Yellowish white Bluish white sRGB sRGB is an international standard which defines and unifies the difference of color NOTE appearance between equipment.
OSD Setup OSD Setup H.Position 50 V.Position 50 Timeout 50 Language ENGLISH Adjustment Item English Problem / Option Button to Press H.Position OSD is too left OSD is too right V.Position OSD is too low OSD is too high Timeout You can set the OSD display duration time between 5 and 60 seconds.
Extra Extra Reset Signal Select Yes Auto Information Adjustment Item Signal Select Problem / Option Yes Reset Direct D-SUB 1600(H)㸨900(V) 56KHz 60Hz Button to Press Factory-preset data is restored. No Return to Menu. Auto D-SUB DVI Select the signal input automatically. Select the Analog input. Select the Digital (DVI) input. NOTE At selected the AUTO, it will automatically be selected when just one source is available.
Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. Volume: Press the + Button when the Menu is not displayed. Adjustment Item ENGLISH Volume Problem / Option Button to Press Too soft Too loud Auto Adjust: Press and hold the Auto Button for 3-4 seconds when the Menu is not displayed. Only Analog Input Adjustment Item Auto Adjust * Problem / Option Button to Press Adjust H. / V. Position, Clock and Phase automatically.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.
C Pressing and holding of the AUTO Button for about 3-4 seconds. (Auto Adjust) D Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Image Adjust. ENGLISH E Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. F 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps F and G because the Clock may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again. Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment. H Adjust the Brightness and Color to get the desired picture after you complete the Clock and Phase adjustments.
POWER MANAGEMENT FEATURE ENGLISH The power management feature of this product complies with power saving requirement of ENERGY STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 3. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance. Problem Check The picture does not appear.
ENGLISH Problem Check No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The audio output level of the audio equipment is within the specification of the monitor. The sound is too loud or too quiet. The audio output level of the audio equipment is within the specification of the monitor. A strange noise is heard. The Audio Cable is properly connected.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite B2080HSD Size Category 20" LCD Panel Panel technology TN Diagonal: 20" (51cm) Pixel pitch 0.2768mm H × 0.2768mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left: 85 degrees each Up / Down: 80 degrees each (Typical) Response time 5ms (Black, White, Black, Typical) Display Colours Approx.16.
SPECIFICATIONS : ProLite E2080HSD Size Category 20" ENGLISH LCD Panel Panel technology TN Size Diagonal: 20" (51cm) Pixel pitch 0.2768mm H × 0.2768mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left: 85 degrees each Up / Down: 80 degrees each (Typical) Response time 5ms (Black, White, Black, Typical) Display Colours Approx.16.7M Sync Frequency Analog: Horizontal: 24.0-80.
DIMENSIONS : ProLite B2080HSD 478.0mm/18.8” 445.0mm/17.5” ENGLISH ( 244.5mm/9.6” 251.0mm/9.9” 302.0mm/11.9” 375.5mm/14.8”(505.5mm/19.9”) 49.0mm/1.9” ) : Maximum adjustment range DIMENSIONS : ProLite E2080HSD 478.0mm/18.8” 445.0mm/17.5” 204.5mm/8.0” 351.0mm/13.8” 251.0mm/9.9” 302.0mm/11.9” 49.0mm/1.9” 219.5mm/8.
COMPLIANT TIMING Video Mode VGA ENGLISH SVGA 640 × 480 800 × 600 VESA XGA Macintosh PC9801 1024 × 768 Horizontal Frequency Vertical Frequency Dot Clock 31.469kHz 59.940Hz 25.175MHz 37.500kHz 75.000Hz 31.500MHz 37.861kHz 72.809Hz 31.500MHz 35.156kHz 56.250Hz 36.000MHz 37.879kHz 60.317Hz 40.000MHz 46.875kHz 75.000Hz 49.500MHz 48.077kHz 72.188Hz 50.000MHz 48.363kHz 60.004Hz 65.000MHz 56.476kHz 70.069Hz 75.000MHz 60.023kHz 75.029Hz 78.750MHz 63.981kHz 60.020Hz 108.