USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
Congratulations! for Sustainable IT TCO Certified is an international third party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect environmental, social and economic responsibility. Every TCO Certified product model is verified by an accredited independent test laboratory.
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
TABLE OF CONTENTS FOR YOUR SAFETY............................................................................................ 1 SAFETY PRECAUTIONS................................................................................ 1 SPECIAL NOTES ON LCD MONITORS ......................................................... 3 CUSTOMER SERVICE ................................................................................... 3 CLEANING .................................................................................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION ENGLISH The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1920 × 1080 ENGLISH High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness 250cd/m2 (Typical) / Quick Response Time 5ms (Typical) : ProLite B2280HS-B1 / ProLite B2280HS-W1, ProLite E2280HS-B1 / ProLite E2280HS-W1 High Contrast 1000:1 (Typical), Adv.
CHECKING THE CONTENTS OF THE PACKAGE The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office. CAUTION DVI-D Signal Cable*4 Stand-Base Cable Holder DisplayPort Cable*5 2 Stand* Safety Guide *1 The rating of the Power Cable enclosed in 120V area is 10A/125V.
FITTING AND REMOVAL OF BASE : ProLite B2280HS ENGLISH CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
FITTING AND REMOVAL OF BASE : ProLite E2280HS / ProLite E2282HS CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. ENGLISH Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
ENGLISH CONTROLS AND CONNECTORS : ProLite B2280HS-B1 / ProLite B2280HS-W1 Power Switch ( ) Menu Button (MENU) + / Volume / Blue Light Reducer Button ( + / ) Power Indicator Normal operation NOTE Blue: Orange: Power Management - / ECO Button ( - / ) Auto Button (AUTO) Speakers Audio Connector ( ) VGA(D-sub) mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DVI) HDMI Connector (HDMI) AC Connector( : Alternating current) (AC IN) Keyhole for Security Lock NOTE You can fasten a sec
ENGLISH CONTROLS AND CONNECTORS : ProLite B2280HS-B1DP / ProLite B2280HS-W1DP Power Switch ( ) Menu Button (MENU) + / Volume / Blue Light Reducer Button ( + / ) Power Indicator Normal operation NOTE Blue: Orange: Power Management - / ECO Button ( - / ) Auto Button (AUTO) Speakers Audio Connector ( ) DVI-D 24pin Connector (DVI) VGA(D-sub) mini 15pin Connector (D-SUB) DisplayPort Connector (DP) AC Connector( : Alternating current) (AC IN) Keyhole for Security Lock NOTE You can fas
ENGLISH CONTROLS AND CONNECTORS : ProLite E2280HS-B1 / ProLite E2280HS-W1 / ProLite E2282HS Power Switch ( ) Menu Button (MENU) + / Volume Button / Blue Light Reducer ( + / ) Power Indicator Normal operation NOTE Blue: Orange: Power Management - / ECO Button ( - / ) Auto Button (AUTO) Speakers Audio Connector ( ) VGA(D-sub) mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DVI) HDMI Connector (HDMI) Installation hole of Cable Holder AC Connector( : Alternating current) (AC IN)
ENGLISH CONTROLS AND CONNECTORS : ProLite E2280HS-B1DP / ProLite E2280HS-W1DP Power Switch ( ) Menu Button (MENU) + / Volume Button / Blue Light Reducer ( + / ) Power Indicator Normal operation NOTE Blue: Orange: Power Management - / ECO Button ( - / ) Auto Button (AUTO) Speakers Audio Connector ( ) DVI-D 24pin Connector (DVI) VGA(D-sub) mini 15pin Connector (D-SUB) DisplayPort Connector (DP) Installation hole of Cable Holder AC Connector( : Alternating current) (AC IN) Keyhole
CONNECTING YOUR MONITOR : ProLite B2280HS-B1 / ProLite B2280HS-W1 Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power supply. Turn on your monitor and computer.
CONNECTING YOUR MONITOR : ProLite B2280HS-B1DP / ProLite B2280HS-W1DP NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
CONNECTING YOUR MONITOR : ProLite E2280HS-B1 / ProLite E2280HS-W1 / ProLite E2282HS ENGLISH Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power supply. Turn on your monitor and computer.
CONNECTING YOUR MONITOR : ProLite E2280HS-B1DP / ProLite E2280HS-W1DP NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 37: COMPLIANT TIMING. ENGLISH ADJUSTING THE VIEWING ANGLE : ProLite E2280HS / ProLite E2282HS For optimal viewing it is recommended to look at the full face of the monitor. Hold the stand so that the monitor does not topple when you change the monitor’s angle. You are able to adjust the monitor’s angle up to 21° upward, 4° downward.
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B2280HS For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference. Hold the panel so that the monitor does not topple when you change the monitor’s height or 130mm angle. ENGLISH You are able to adjust the monitor's height up to 130mm, angle up to 160 degrees right and left, 22 degrees upward and 5 degrees downward.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 37. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 25 for SCREEN ADJUSTMENTS. Press the MENU Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the + / - Buttons.
ADJUSTMENT MENU CONTENTS Luminance Luminance Contrast 50 Brightness 50 Eco Standard Adv. Contrast ON Problem / Option Contrast Too dull Too intense Brightness *1 Too dark Too bright Eco Off Mode1 Mode2 Mode3 i-Style Color *2 Adv. Contrast Direct Button to Press Normal Brightness of back-light is reduced. Brightness of back-light is reduced more than Mode1. Brightness of back-light is reduced more than Mode2. For general windows environment and monitor Standard default setting.
Image Setup Image Setup Clock 50 Phase 50 H.Position 50 50 V.Position Aspect ENGLISH Adjustment Item Problem / Option Too narrow Too wide Clock*1,2 Phase*1,2 Full To correct flickering text or lines H. Position*2 Too left Too right V. Position*2 Too low Too high Aspect 1 Full Expansion display Aspect Expansion display of Aspect * See page 25 for SCREEN ADJUSTMENTS. *2 Only Analog Input.
Color Temp.* Color Temp. Gamma Mode1 Color Temp. Warm 50 Adjustment Item Gamma User-G 50 User-B 50 Problem / Option Mode1 Mode2 Mode3 User Color Temp. Warm Normal Cool sRGB Button to Press Normal High contrast Dark User-R Too weak User-G Too strong User-B Greenish white Yellowish white Bluish white sRGB sRGB is an international standard which defines and unifies the difference of color NOTE appearance between equipment.
OSD Setup OSD Setup H.Position 50 V.Position 50 Timeout 50 Language ENGLISH Adjustment Item English Problem / Option Button to Press H.Position OSD is too left OSD is too right V.Position OSD is too low OSD is too high Timeout You can set the OSD display duration time between 5 and 60 seconds.
Extra Extra Input : Resolution : H.Frequency : V.Frequency : Adjustment Item Reset Signal Select Direct Yes Auto LINE IN Off D-SUB 1920(H)㸨1080(V) 68KHz 60Hz Problem / Option Button to Press Yes Factory-preset data is restored. No Auto D-SUB DVI HDMI *3 DisplayPort *4 Return to Menu. Select the signal input automatically. Select the Analog input. Select the Digital (DVI) input. Select the Digital (HDMI) input. Select the Digital (DisplayPort) input.
Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. Volume: Press the + Button when the Menu is not displayed. Adjustment Item ENGLISH Volume Problem / Option Button to Press Too soft Too loud Auto Adjust: Press and hold the Auto Button for 3-4 seconds when the Menu is not displayed. Only Analog Input Adjustment Item Auto Adjust * Problem / Option Button to Press Adjust H. / V. Position, Clock and Phase automatically.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.
Pressing and holding of the AUTO Button for about 3-4 seconds. (Auto Adjust) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Image Adjust. ENGLISH Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps and because the Clock may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again. Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment. Adjust the Brightness and Color to get the desired picture after you complete the Clock and Phase adjustments. Put back your favorite wallpaper.
POWER MANAGEMENT FEATURE ENGLISH The power management feature of this product complies with power saving requirement of VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below. The power management function, including any timer settings is configured by the operating system.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. Problem Check The picture does not appear. (Power indicator does not light up.
ENGLISH Problem Check No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The audio output level of the audio equipment is within the specification of the monitor. The sound is too loud or too quiet. The audio output level of the audio equipment is within the specification of the monitor. A strange noise is heard. The Audio Cable is properly connected.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite B2280HS-B1 / ProLite B2280HS-W1 Size Category 21.5" Size Diagonal: 21.5" (54.7cm) Pixel pitch 0.2482mm H × 0.2482mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left / Up / Down: 80 degrees each (Typical) Response time 5ms (Black, White, Black, Typical) Display Colours Approx.16.
SPECIFICATIONS : ProLite B2280HS-B1DP / ProLite B2280HS-W1DP Size Category 21.5" ENGLISH LCD Panel Panel technology TN Size Diagonal: 21.5" (54.7cm) Pixel pitch 0.2482mm H × 0.2482mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left / Up / Down: 80 degrees each (Typical) Response time 5ms (Black, White, Black, Typical), 1ms (Gray to Gray) Display Colours Approx.16.7M Sync Frequency Analog: Horizontal: 24.0-80.
SPECIFICATIONS : ProLite E2280HS-B1 / ProLite E2280HS-W1 Size Category 21.5" Size Diagonal: 21.5" (54.7cm) Pixel pitch 0.2482mm H × 0.2482mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left / Up / Down: 80 degrees each (Typical) Response time 5ms (Black, White, Black, Typical) Display Colours Approx.16.7M Sync Frequency Analog: Horizontal: 24.0-80.0kHz, Vertical: 56-75Hz Digital: Horizontal: 30.0-80.
SPECIFICATIONS : ProLite E2280HS-B1DP / ProLite E2280HS-W1DP Size Category 21.5" ENGLISH LCD Panel Panel technology TN Size Diagonal: 21.5" (54.7cm) Pixel pitch 0.2482mm H × 0.2482mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left / Up / Down: 80 degrees each (Typical) Response time 5ms (Black, White, Black, Typical), 1ms (Gray to Gray) Display Colours Approx.16.7M Sync Frequency Analog: Horizontal: 24.0-80.
SPECIFICATIONS : ProLite E2282HS Size Category 21.5" LCD Panel Panel technology TN Size Diagonal: 21.5" (54.7cm) Pixel pitch 0.2482mm H × 0.2482mm V Brightness 250cd/m2 (Typical) 1000 : 1 (Typical), Adv. Contrast Function Available Right / Left: 85 degrees each Up / Down: 80 degrees each (Typical) Response time 5ms (Black, White, Black, Typical), 2ms (Gray to Gray) Display Colours Approx.16.7M Sync Frequency Analog: Horizontal: 24.0-80.0kHz, Vertical: 56-75Hz Digital: Horizontal: 30.0-80.
DIMENSIONS : ProLite B2280HS 509.5mm/20.1” 478.0mm/18.8” ENGLISH ( 244.5mm/9.6” 269.5mm/10.6” 316.5mm/12.5” 393.0mm/15.5”(523.0mm/20.6”) 48.5mm/1.9” ) : Maximum adjustment range DIMENSIONS : ProLite E2280HS 509.5mm/20.1” 478.0mm/18.8” 204.5mm/8.0” 365.5mm/14.4” 269.5mm/10.6” 316.5mm/12.5” 48.5mm/1.9” 219.5mm/8.6” DIMENSIONS : ProLite E2282HS 509.5mm/20.1” 478.0mm/18.8” 189.5mm/7.5” 365.5mm/14.4” 269.5mm/10.6” 316.5mm/12.5” 48.5mm/1.9” 229.5mm/9.
Video Mode VGA SVGA VESA XGA SXGA Macintosh PC9801 640 × 480 800 × 600 1024 × 768 1280 × 1024 Horizontal Frequency Vertical Frequency Dot Clock 31.469kHz 59.940Hz 25.175MHz 37.500kHz 75.000Hz 31.500MHz 37.861kHz 72.809Hz 31.500MHz 35.156kHz 56.250Hz 36.000MHz 37.879kHz 60.317Hz 40.000MHz 46.875kHz 75.000Hz 49.500MHz 48.363kHz 60.004Hz 65.000MHz 56.476kHz 70.069Hz 75.000MHz 60.023kHz 75.029Hz 78.750MHz 63.981kHz 60.020Hz 108.000MHz 79.976kHz 75.025Hz 135.