Operation Manual

ENGLISH
16 BEFORE YOU OPERATE THE MONITOR

Signal Timing
Change to the desired signal timing listed on page 37: COMPLIANT TIMING.
COMPUTER SETTING
ADJUSTING THE VIEWING ANGLE : ProLite E2280HS / ProLite E2282HS

For optimal viewing it is recommended to look at
the full face of the monitor.

Hold the stand so that the monitor does not
topple when you change the monitor’s angle.

You are able to adjust the monitor’s angle up to
21° upward, 4° downward.

In order to ensure a healthy and relaxed body
position when using the monitor at visual
display workstations, it is recommended that
the adjusted tilt angle should not exceed 10
degrees. Adjust the monitor’s angle to your own
preference.

Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.

Careful attention is required not to
catch your fingers or hands when you
change the height or the angle.
NOTE