USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
Congratulations! for Sustainable IT TCO Certified is an international third party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect environmental, social and economic responsibility. Every TCO Certified product model is verified by an accredited independent test laboratory.
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
TABLE OF CONTENTS FOR YOUR SAFETY............................................................................1 SAFETY PRECAUTIONS................................................................1 SPECIAL NOTES ON LCD MONITORS .........................................3 CUSTOMER SERVICE ...................................................................3 CLEANING ......................................................................................3 BEFORE YOU OPERATE THE MONITOR ..............................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION ENGLISH The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1920 × 1080 High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness 250cd/m2 (Typical) ENGLISH Quick Response Time 1ms (Gray to Gray) Blue Light Reducer Digital Character Smoothing Automatic Set-up Stereo Speakers 2 × 1W Stereo Speakers Plug & Play VESA DDC2B Compliant Windows® Vista/7/8/8.
WALL MOUNTING When you use with the wall mounting, in consideration of thickness of the mounting WARNING stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor. Please check if the wall or ceiling can support the weight of the monitor before mounting it.
FITTING AND REMOVAL OF BASE : ProLite B2483HS CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. ENGLISH Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
FITTING AND REMOVAL OF BASE : ProLite E2483HS CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. ENGLISH Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
ENGLISH CONTROLS AND CONNECTORS : ProLite B2483HS Power Indicator Normal operation NOTE Blue: Orange: Power Management Power Switch ( ) Menu / Select Button (MENU) Scroll Up / Volume Button ( / Scroll Down / ECO Mode Button ( ) / ) Exit Button (EXIT) Auto Button (AUTO) Speakers VGA(D-sub) mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DVI-D) HDMI Connector (HDMI) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed w
ENGLISH CONTROLS AND CONNECTORS : ProLite E2483HS Power Indicator NOTE Blue: Normal operation Orange: Power Management Power Switch ( ) Menu / Select Button (MENU) Scroll Up / Volume Button ( / Scroll Down / ECO Mode Button ( ) / ) Exit Button (EXIT) Auto Button (AUTO) Speakers VGA(D-sub) mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DVI-D) HDMI Connector (HDMI) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed w
CONNECTING YOUR MONITOR : ProLite B2483HS ENGLISH Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power supply. Turn on your monitor and computer. NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used.
CONNECTING YOUR MONITOR : ProLite E2483HS NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 30: COMPLIANT TIMING. ENGLISH ADJUSTING THE VIEWING ANGLE : ProLite E2483HS For optimal viewing it is recommended to look at the full face of the monitor. Hold the stand so that the monitor does not topple when you change the monitor’s angle. You are able to adjust the monitor’s angle up to 22° upward, 5° downward.
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B2483HS For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference. Hold the panel so that the monitor does not topple when you change the monitor’s height or angle. 130mm ENGLISH You are able to adjust the monitor's height up to 130mm, angle up to 45 degrees right and left, 22 degrees upward and 5 degrees downward.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 30. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 21 for SCREEN ADJUSTMENTS. Press the ENTER Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the / Buttons.
ADJUSTMENT MENU CONTENTS Auto Adjust Only Analog Input Auto Adjust * Direct Problem / Option Button to Press Adjust H. / V. Position, Pixel Clock and Phase automatically. * For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 21 for SCREEN ADJUSTMENTS. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. Auto Adjust : Press the Auto Button when the Menu is not displayed.
Geometry Only Analog Input ENGLISH Adjustment Item Problem / Option H. Position Too left Too right V. Position Too low Too high Pixel Clock Too narrow Too wide Phase Button to Press To correct flickering text or lines Color* Adjustment Item Problem / Option 9300K Bluish white 7500K Yellowish white 6500K Reddish white Red User Preset Green Blue Button to Press Too weak Too strong * Color adjustments is disabled when i-Style Color or Blue Light Reducer is activated.
Language Language Problem / Option English Français Deutsch Italiano Polski Español English French German Italian Polish Spanish Button to Press Nederlands Ĉesky Dutch Japanese Simplified Chinese Russian Czech ENGLISH Adjustment Item Recall Adjustment Item Recall All Problem / Option Button to Press Yes Factory-preset data is restored. No Return to Menu.
Miscellaneous Adjustment Item Problem / Option Button to Press 12345 ENGLISH Sharpness DDC/CI You can change the picture quality from 1 to 5 (sharp to soft). Press the Button to change the picture quality in numerical order. Press the Button to change the picture quality in reverse numerical order. On DDC/CI is turned ON. Off DDC/CI is turned OFF. NOTE DDC/CI On and Off are switched as follows by pressing the On Off Button successively.
Input Select Problem / Option AUTO*1 Input Select Direct D-sub DVI HDMI D-sub Button to Press Select the Analog input. Select the Digital (DVI) input. Select the Digital (HDMI) input. Select the Analog input. Manual*2 DVI Select the Digital (DVI) input. HDMI Select the Digital (HDMI) input. 1 NOTE * It will be selected automatically when the selected signal is not available. *2 Input source is fixed, not selected automatically when D-sub, DVI and HDMI which are selected.
Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. ENGLISH ECO Mode : Press the Button when the Menu is not displayed. On : Brightness of back light is reduced. Off : Normal i-Style Color * : Press the EXIT Button when the Menu is not displayed. Off : Return to a state set by color adjustment. Standard : For general windows environment and monitor default setting. Game : For PC game environment.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to the screen enlargement process.
Press the AUTO Button. (Auto Adjust) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
NOTE and In case the strong flicker or blurs remain on a part of the screen, repeat steps because the Pixel Clock may not be adjusted correctly. Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment. Adjust the Brightness and Color to get the desired picture after you complete the Pixel Clock and Phase adjustments. Put back your favorite wallpaper.
POWER MANAGEMENT FEATURE ENGLISH The power management feature of this product complies with power saving requirement of ENERGY STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below.
TROUBLE SHOOTING 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
ENGLISH Problem Check The screen is shaking. The power voltage is within the specification of the monitor. The signal timing of the computer is within the specification of the monitor. No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The Mute is OFF. The audio output level of the audio equipment is within the specification of the monitor.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite B2483HS Size Category 24" LCD Panel Diagonal: 24" (61cm) Size Pixel pitch 0.277mm H × 0.277mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 85 degrees each, Up / Down : 80 degrees each (Typical) Response time 1ms (Gray to Gray) Display Colours Approx. 16.7M Sync Frequency Native Resolution 1920 × 1080, 2.
ENGLISH SPECIFICATIONS : ProLite E2483HS Size Category 24" LCD Panel Diagonal: 24" (61cm) Panel Technology TN Size Pixel pitch 0.277mm H × 0.277mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 85 degrees each, Up / Down : 80 degrees each (Typical) Response time 1ms (Gray to Gray) Display Colours Sync Frequency Native Resolution Support max. resolution Approx. 16.7M Horizontal: 30.0-80.
DIMENSIONS : ProLite B2483HS 565.5mm/22.3” 533.5mm/21.0” 250.0mm/9.8” ENGLISH ( 230.0mm/9.1” 301.0mm/11.9” 340.0mm/13.4” 386.5mm/15.2”(516.5mm/20.3”) 393.0mm/15.5” 56.5mm/2.2” ) : Maximum adjustment range DIMENSIONS : ProLite E2483HS 565.5mm/22.3” 533.5mm/21.0” 203.0mm/8.0” 412.0mm/16.2” 301.0mm/11.9” 340.0mm/13.4” 56.5mm/2.2” 238.0mm/9.
COMPLIANT TIMING VGA 640×480 Horizontal Frequency 31.469kHz SVGA XGA 800×600 37.879kHz 60.317Hz 1024×768 48.363kHz 60.004Hz 65.000MHz SXGA 1280×1024 63.981kHz 60.020Hz 108.000MHz WXGA+ 1440×900 55.935kHz 59.887Hz 106.500MHz UXGA WSXGA+ Full HD 1600×1200 1680×1050 1920×1080 75.000kHz 60.000Hz 162.000MHz 65.290kHz 60.000Hz 146.250MHz 66.590kHz 59.930Hz 138.500MHz 640×350 31.469kHz 70.087Hz 25.175MHz 720×400 31.469kHz 70.087Hz 28.
