ENGLISH USER MANUAL DEUTSCH FRANCAIS NEDERLANDS Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference. PLC1900WTV-e.
English Explanation of WARNING Symbols Dangerous Voltage: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence dangerous voltage within the inside of the product that may be sufficient level to constitute a risk of electric shock to persons.
CAUTION: Any damage caused by incorrectly attempting to mount this LCD TV is not covered under the terms of the manufacturers warranty. WARNING: To reduce the risk of fire or electric shock, do not expose this LCD TV to rain or moisture. According to WEEE regulation , this monitor can't be handled as normal trash in Europe when it is out of usage. Please refer to the recycle information from our website to handle it.
English Content Deutsch Français Nederlands ACCESSORIES...................................................................................................................1 FRONT PANEL CONTROL..................................................................................................2 BACK PANEL CONTROL ....................................................................................................3 REMOTE CONTROL ..................................................................................
English ACCESSORIES Thank you for purchasing this LCD-TV of high performance! This LCD-TV package comes with: Deutsch LCD TV User’s Guide Book Remote Control Battery AA x 2 Power Cord VGA Cable RCA A/V Cable HDMI Cable Audio Cable Français Nederlands 1
English FRONT PANEL CONTROL XYZ[ \ ] ^ _ X Volume Down (Adjust Decreasing) Y Volume Up (Adjust Increasing) Z On Screen Display Menu Key (Back to Previous Menu) [ Scroll Down (Channel Down) \ Scroll Up (Channel Up) ] Input Source Selection (Enter) ^ Power On/Off Switch _ Power LED Indicator/ Remote Control Receiver 2
English BACK PANEL CONTROL Deutsch Français Nederlands A B A Power Input (AC Input) B HDMI (support HDCP or PC) Signal Input C VGA (15 pin) Signal Input from Computer D SCART Signal Input E YPbPr / HD Component Video Input F Audio Input for AV, YPbPr or HDMI-DVI components (left/ right) G Composite Video Input H RF Antenna / Cable TV Input I Audio Input for VGA C D 3 E F G H I
English REMOTE CONTROL 4
B TV Switch to TV when in any source C VOL +/– Adjust volume up or down D 0~9 number Change channel number E LAST Return to previous channel RED In Teletex function: move cursor down In Name function: edit channel name / select channel for exchange GREEN In Teletext function: move cursor up In Name function: add desired channels / select channel for exchange F YELLOW BLUE In Teletext function: change from current page to selected page In Name function: erase desired channels In Teletext fun
English Teletext function control button • PICTURE button In MIXED Mode: Press the button to return from MIXED mode to the normal TV Screen (current program). • • TEXT/ MIX button In TV Mode: Press the TEXT/ MIX button to enter the Teletext mode. In TELETEXT Mode: Press the button again to superimpose a Teletext broadcast onto the screen of current TV program (Mixed mode). • • • • • • • • • • • • Store button Store current page in List mode.
• 7 Nederlands • Reveal button Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display. English Size button Select double height text under Teletext mode for full screen. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display.
INSTALLATION English Connecting RF antenna or Cable TV Wire Make sure the power is OFF before installing your LCD TV. Connect the LCD TV to TV antenna wire or cable/satellite box with 75-ohm coaxial cable. Preset the TV channels into memory with AUTO SCAN function (See page 13) when using an antenna or cable TV system without a cable connecter box. RF Cable or Adapter (not supplied) Connecting to DVD/ Set Top Box Connect Video/ Audio cables from compatible devices into the back panel of LCD TV.
3) With YPbPr cable: English YPbPr Cable (not supplied) Français VCD or DVD Player Deutsch Audio in Cable (not supplied) 4) With HDMI cable: Nederlands VCD or DVD Player HDMI Cable (not supplied) 5) With HDMI to DVI cable: Audio Cable (not supplied) VCD or DVD Player HDMI Cable (not supplied) 9
English Connecting to a Computer 1) VGA (15pin D-Sub): Connect the VGA cable from VGA output of the computer to the VGA terminal input of your LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer to the audio input terminal (green) of the LCD TV. PC PC Audio In Cable (not supplied) VGA 15Pin Cable 2) HDMI-DVI cable: Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input of the LCD TV.
English BASIC OPERATION To operate your LCD TV, you may use the TV remote control or top panel buttons to select input source, change channels, or adjust volume. Before using the LCD TV: Connect external equipments properly. Insert the power plug, and the power LED indicator will light orange. Selecting input source Press the INPUT button on the remote control, and use ▲▼ to select the required input source between PC, HDMI, TV, AV, SCART, or YPBPR. Volume Adjust Press – VOL + to adjust volume.
English ADVANCED OPERATION—OSD MENU You can use the OSD menu to adjust various settings for your LCD TV. Press the MENU button to display the OSD Menu, and use ◄ ► to select the desired OSD menu. In HDMI, TV, AV, SCART, YPbPr mode Picture Menu When input source is TV, When input source is HDMI, AV, SCART, or YPbPr: Contrast: To adjust contrast of video. Brightness: To adjust luminance of video. Colour: To adjust colour. Tint: To adjust tint level. Sharpness: To adjust picture sharpness. Colour Temp.
AVC: To select automatic volume control circuitry (AVC) ON or OFF. (only available in TV mode) English OSD Menu When input source is TV, When input source is HDMI , AV, SCART, or YPbPr: Deutsch Français Note: The Canal+ function is available only when the input source is SCART. Reset: To recall factory setting condition. Press ENTER to recall all settings. Channel Menu It is only active in TV source. Auto Scan: To automatically preset the channels into TV’s memory.
English selection area, select “OTHERS.” Kindly suggest you auto scan all the channels before watching your TV for the first time. Note: After auto scanning all the channels, you need not to do it again when turning on your TV next time. Manual Store: To search the detectable channels and store them into memory manually. 1. 2. 3. 4. 5. 6. Press ◄ or ► to get into “Manual Store.” Move the cursor to “Prog. No, “ and select the desired channel position with ◄►.
Move your cursor to channel 1 and press red key (Sel1) to select channel 1. Move your cursor to channel 2 and press green key (Sel2) to select channel 2. Confirm your selection by pressing blue key (OK). Press MENU to exit. English 1. 2. 3. 4. In PC Function (VGA and HDMI-DVI mode) When input source is PC: When input source is HDMI (PC function): Deutsch PC Menu Français Nederlands Auto Adjust: Auto adjust picture’s horizontal position, vertical position, fine tune, and H-Size with ◄►.
English Sound Menu Bass: To adjust the bass. Treble: To adjust the treble. Balance: To adjust the left and right audio balance. AVC: Enable or disable Auto volume control. (disabled in PC source) OSD Menu Sleep: To set TV sleep timer between 15 min, 30 min, 45 min, 60 min, or OFF. TTX Language: Disabled in PC & HD (YPbPr) source. OSD Language: To select the OSD language between English, French, German, Spanish, Italian, Portuguese, Dutch, and Swedish with ◄►.
LCD Type English TECHNICAL INFORMATION 19.05” TFT Active Matrix 0.285(H) x 0.285(V) mm pixel pitch RGB vertical stripe Glass surface Anti-Glare RGB RGB analog (0.7/1.
English SAFETY PRECAUTIONS This LCD TV is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the LCD TV as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. Warnings This LCD TV should be operated only at the correct power sources indicated on the label on the rear end of the LCD TV.
English CARE AND MAINTENANCE Care TROUBLESHOOTING No Power Make sure A/C power cord is securely connected to the power supply is firmly connected to the TV. Plug another electrical device into the power outlet to verify the outlet is working. Power on but no screen image Make sure the video cables are tightly secured. You have selected the correct video input. Adjust brightness. Make sure all cables are installed.
