USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
TABLE OF CONTENTS FOR YOUR SAFETY............................................................................1 SAFETY PRECAUTIONS................................................................1 SPECIAL NOTES ON LCD MONITORS .........................................3 ENGLISH CUSTOMER SERVICE ...................................................................3 CLEANING ......................................................................................3 BEFORE YOU OPERATE THE MONITOR ....................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1920 × 1080 2 High Contrast 1000:1 (Typical) / Brightness 250cd/m (Typical) : ProLite T2234MC-B1 / ProLite T2234MC-B1X / ProLite T2234MC-B2X / ProLite T2234MC-B3X / ProLite T2234MSC-B1X / ProLite T2234MSC-B3X ENGLISH 2 High Contrast 1000:1 (Typical) / Brightness 350cd/m (Typical) : ProLite T2234MC-B1AGB / ProLite T2234MC-B3AGB Digital Character Smoothing Automatic Set-up Stereo Speakers : ProLite T2234MSC 2 × 3W Stereo Speaker
WALL MOUNTING WARNING When you use with the wall mounting, in consideration of thickness of the mounting stage, tighten the M4 Screw with washer which “L” length is 8mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor. L ENGLISH Screw Mounting Stage Chassis BUILT-IN EQUIPMENT WARNING This product is not designed for the purpose of being used in high temperature environment.
CONTROLS AND CONNECTORS ENGLISH Remote Control Touch V01*1 Menu Button (MENU)*1 )*1 Scroll Up / Brightness Button ( )*1,2 Scroll Down / Contrast Button ( Scroll Down / Mute Button ( Select Button (SELECT)* Power Switch ( )* 1,3 1 )*1 VGA(D-sub) mini 15pin Connector DVI-D 24pin Connector Remote Control Touch V01 Connector USB Connector Connector for AC Adapter Power Indicator NOTE Green: Normal operation Orange: Power Management Audio Connector*3 Speakers*3 *1 Remote Control Touch
CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the Connect the computer to the monitor with the USB Cable. Connect the monitor cable to the Remote Control Touch V01 (option), if necessary. Connect the AC Adapter to the monitor and the Power Cable to the AC Adapter first and then connect to the power supply.
[Fitting and Removal of Cable Cover] ENGLISH Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down. Step 2 Step1 Step2 < Removal > Move the stand into position as shown in Step1. Remove the cable cover as shown in Step2. Cable Cover Cable Hole < Fitting > As shown in Step3, connect the cables and put those through the cable holes. As shown in Step4, place the cable cover and fix it firmly using a screw.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 29: COMPLIANT TIMING. http://www.iiyama.com NOTE For additional information on how to download the driver for your touch screen monitor, please access the internet site noted above. Monitor Drivers are not required in most cases for Macintosh or Unix operating systems. For further information, please contact your computer dealer first for advice.
ADJUSTING THE VIEWING ANGLE ENGLISH For optimal viewing it is recommended to look at the full face of the monitor. Hold the panel so that the monitor does not topple when you change the monitor’s angle. You are able to adjust the monitor’s angle up to 90 degrees upward, 5 degrees downward. NOTE Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. Careful attention is required not to catch your fingers or hands when you change the angle.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 29. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 17 for SCREEN ADJUSTMENTS. Press the MENU Button to start the On Screen Display feature. There are additional Buttons. Menu items which can be switched by using the / ENGLISH C ON TR A ST B R IGH TN ESS 1280x1024 FH: 63KHz FV: 59.
ADJUSTMENT MENU CONTENTS C ON TR A ST B R IGH TN ESS ENGLISH 1280x1024 FH: 63KHz FV: 59.9Hz Adjustment Item Problem / Option CONTRAST Direct Too dull Too intense BRIGHTNESS * Direct Too dark Too bright Button to Press * Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. CONTRAST: Press the T2234MC only.
Adjustment Item AUTO ADJUST *1 A U TO A D J U S T H - P O S I TI O N V- P O S I TI O N H - S I ZE FI N E Problem / Option Adjust H/V-POSITION, H-SIZE and FINE automatically. H-POSITION Too left Too right V-POSITION Too low Too high H-SIZE *2 Too narrow Too wide FINE *2 Button to Press To correct flickering text or lines *1 For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 17 for SCREEN ADJUSTMENTS. *2 See page 17 for SCREEN ADJUSTMENTS.
OSD H-POSITION OSD V-POSITION OSD TIMEOUT RESET INPUT SELECT ENGLISH Adjustment Item Problem / Option OSD H-POSITION OSD is too left OSD is too right OSD V-POSITION OSD is too low OSD is too high OSD TIMEOUT You can set the OSD display duration time between 5 and 60 seconds. RESET Factory-preset data is restored. INPUT SELECT Direct Button to Press AUTO Search for an available input source and select automatically. VGA Select the analog input. DVI Select the digital input.
ESPAÑOL Adjustment Item OSD LANGUAGE Problem / Option ENGLISH FRANÇAIS DEUTSCH ITALIANO 9300 6500 5500 7500 USER Adjustment Item COLOR TEMP.
* VOLUME MUTE ENGLISH Adjustment Item Button to Press Too soft Too loud VOLUME MUTE Problem / Option Direct ON Turn off the sound temporarily. OFF Return the sound volume to the previous level. * Available for ProLite T2234MSC only. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. MUTE: Press the Button when the Menu is not displayed.
SCREEN ADJUSTMENTS The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched to fit the full screen. It is recommended to operate at resolution of 1920 × 1080 in normal use.
Press the SELECT Button. (AUTO ADJUST) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH Adjust the V-POSITION so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H-POSITION so that the left side of the picture frame will move to the left edge of the display area.
NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps because the H-SIZE may not be adjusted correctly. If the flicker or blurs still and again. remain, set the refresh rate of computer to low (60Hz) and repeat steps from Adjust the H-POSITION after the FINE adjustment if the horizontal position moves during the adjustment. Adjust the Brightness and Color to get the desired picture after you complete the H-SIZE and FINE adjustments. Put back your favorite wallpaper.
POWER MANAGEMENT FEATURE ENGLISH When your computer is not in use, the power management feature will automatically reduce the power consumption of your monitor. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below. The power management function, including any timer settings is configured by the operating system. Check your operating system manual for information on how this can be configured.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3.
RECYCLING INFORMATION ENGLISH For better environment protection please don't dispose your monitor. Please visit our web site: www.iiyama.com/recycle for monitor recycling.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite T2234MC-B1 Touch Screen Light transmission 90% Hardness 7H Thickness 2.5mm Communication system Size Category LCD Panel Projected capacitive 2pt touch ENGLISH Technology USB 22" Panel technology IPS Size Diagonal: 21.5" (55cm) Pixel pitch 0.247mm H × 0.
SPECIFICATIONS : ProLite T2234MC-B1X / ProLite T2234MC-B2X Model Name Technology Touch Screen Light transmission 90% Hardness 7H Thickness 2.5mm Communication system USB ENGLISH Size Category LCD Panel ProLite T2234MC-B1X ProLite T2234MC-B2X Projected capacitive 10pt touch 1.24mm 22" Panel technology IPS Size Diagonal: 21.5" (55cm) Pixel pitch 0.247mm H × 0.
SPECIFICATIONS : ProLite T2234MC-B3X Touch Screen 87% Hardness 6H Thickness 1.5mm Communication system Size Category LCD Panel Projected capacitive 10pt touch USB 22" Panel technology IPS Size Diagonal: 21.5" (55cm) Pixel pitch 0.247mm H × 0.
SPECIFICATIONS : ProLite T2234MC-B1AGB / ProLite T2234MC-B3AGB Model Name Technology Touch Screen ENGLISH ProLite T2234MC-B3AGB Light transmission 86% 83% Hardness 7H 6H Thickness 2.5mm 1.5mm Communication system USB Size Category LCD Panel ProLite T2234MC-B1AGB Projected capacitive 10pt touch 22" Panel technology IPS Size Diagonal: 21.5" (55cm) Pixel pitch Contrast ratio 0.247mm H × 0.
SPECIFICATIONS : ProLite T2234MSC-B1X / ProLite T2234MSC-B3X Model Name Touch Screen ProLite T2234MSC-B3X Light transmission 90% 87% Hardness 7H 6H Thickness 2.5mm 1.5mm Communication system USB Size Category LCD Panel ProLite T2234MSC-B1X Projected capacitive 10pt touch 22" Panel technology IPS Size Diagonal: 21.5" (55cm) Pixel pitch Contrast ratio 0.247mm H × 0.
219.0mm/8.6” DIMENSIONS : ProLite T2234MC 249.5mm/9.8” 100.0mm/3.9” 100.0mm/3.9” 100.0mm/3.9” 351.5mm/13.8” 50.0mm/2.0” 6xM4 SCREW HOLE (VESA MOUNT) 46.0mm/1.8” 268.0mm/10.6” 313.5mm/12.3” ENGLISH 156.5mm/6.2” 517.5mm/20.4” 476.5mm/18.8” 219.0mm/8.6” DIMENSIONS : ProLite T2234MSC 249.5mm/9.8” 28 APPENDIX 100.0mm/3.9” 100.0mm/3.9” 351.5mm/13.8” 50.0mm/2.0” 6xM4 SCREW HOLE (VESA MOUNT) 46.0mm/1.8” 268.0mm/10.6” 313.5mm/12.3” 156.5mm/6.2” 517.5mm/20.4” 476.5mm/18.
COMPLIANT TIMING VGA 640 × 480 SVGA 800 × 600 XGA 1024 × 768 SXGA 1280 × 1024 WXGA+ WSXGA+ Full HD 1440 × 900 1680 × 1050 1920 × 1080 VESA Horizontal Frequency 31.469kHz 37.500kHz 37.861kHz 35.156kHz 37.879kHz 46.875kHz 48.077kHz 48.363kHz 56.476kHz 60.023kHz 63.981kHz 79.976kHz 55.935kHz 65.290kHz 67.500kHz Vertical Frequency 59.940Hz 75.000Hz 72.809Hz 56.250Hz 60.317Hz 75.000Hz 72.188Hz 60.004Hz 70.069Hz 75.029Hz 60.020Hz 75.025Hz 59.887Hz 59.954Hz 60.000Hz Dot Clock 25.175MHz 31.500MHz 31.
