USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC Directive” , 2006/95/EC “Low Voltage Directive” and 2009/125/EC “ErP Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
ENGLISH TABLE OF CONTENTS FOR YOUR SAFETY..........................................................................1 SAFETY PRECAUTIONS..............................................................1 SPECIAL NOTES ON LCD MONITORS .......................................3 CUSTOMER SERVICE .................................................................3 CLEANING ....................................................................................3 BEFORE YOU OPERATE THE MONITOR ...............................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1920 × 1080 2 High Contrast 1000:1 (Typical), ACR Function Available / Brightness 260cd/m (Typical), Quick Response Time 5ms (Typical) X-Res Technology ENGLISH Digital Character Smoothing Automatic Set-up Stereo Speakers 2 × 2W Stereo Speakers Plug & Play VESA DDC2B Compliant Windows® XP/Vista/7 Compliant ® Power Management (ENERGY STAR VESA DPMS Compliant) VESA Mounting Standard (100mm×100mm) Compliant Keyhole for Sec
ENGLISH CONTROLS AND CONNECTORS Power Switch ( ) Power Indicator Normal operation NOTE Blue: Orange: Power Management Select / Input select Button ( ) Scroll up / X-Res Technology Button ( ) Scroll down / i-Style Color Button ( Menu Button ( ) Touch Pen Speakers Headphone Connector (EARPHONE) HDMI Connector (HDMI2) HDMI Connector (HDMI1) DVI-D 24pin Connector (DVI) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed wit
CONNECTING YOUR MONITOR ENGLISH Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the computer to the monitor with the USB Cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power supply. Turn on your monitor (Main Power Switch and Power Switch) and computer.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 23: COMPLIANT TIMING. ADJUSTING THE VIEWING ANGLE 5° 37° When changing the monitors angle, ensure the cabinet is secure when moving the stand thus avoiding any accidents. You are able to adjust the monitor’s angle up to 5 - 37 degrees upward. NOTE Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 23. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 16 for SCREEN ADJUSTMENTS. Press the Button to start the On Screen Display (OSD) feature. There are additional Menu items which can be switched by using the / Buttons.
ADJUSTMENT MENU CONTENTS Auto Image Adjust Auto Image Adjust Only Analog Input Auto Image Adjust * Direct Problem / Option Button to Press Adjust H. / V. Position, Clock and Phase automatically. * For best results, use the Auto Image Adjust in conjunction with the adjustment pattern. See page 16 for SCREEN ADJUSTMENTS. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. Auto Image Adjust: Pressing and holding of the not displayed.
Picture Adjust Picture Adjust ENGLISH Adjustment Item Problem / Option Contrast *3 Too dull Too intense Brightness *1,2,3 Too dark Too bright Adv. Contrast *2,3 ECO Mode * 3 Typical Contrast Ratio On Increased Contrast Ratio Off Normal 1 Brightness of back-light is reduced. 2 Brightness of back-light is reduced more than 1. 3 Brightness of back-light is reduced more than 2. Off / -2 / -1 / 0 / +1 / +2 It will improve the gray level response time of the LCD panel.
Direct Adjustment Item Input Select Problem / Option VGA DVI HDMI1 HDMI2 Input Select Auto NOTE Button to Press Select the VGA input. Select the DVI input. Select the HDMI1 input. Select the HDMI2 input. Search for an available input source and select automatically. Input source is fixed, not selected automatically when VGA, DVI, HDMI1 and HDMI2 which are selected. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations.
Color Adjust Color Adjust Adjustment Item Problem / Option Cool Bluish white Normal Reddish white Greenish white User Color Red Green Blue ENGLISH Warm Too weak Too strong Off Standard i-Style Color Direct Button to Press Return to a state set by color adjustment except i-Style Color. For general windows environment and monitor default setting. Game For PC game environment. Cinema For movie and video environment.
Manual Image Adjust Adjustment Item Clock *1 Manual Image Adjust Problem / Option Button to Press Too narrow Too wide H. Position Too left Too right V. Position Too low Too high ENGLISH H./V. Position *1,2 Phase *1 To correct flickering text or lines Sharpness *4 Adjust the picture quality at resolutions of less 1920 x 1080. You can change the picture quality (3 steps). Video Mode Adjust Full Screen Aspect Ratio * Full screen display 3 Expansion display of Aspect *1 Only Analog Input.
Setup Menu Setup Menu Adjustment Item Problem / Option English ENGLISH Language Select Français Deutsch Nederlands Polski English French German Dutch Polish H.Position OSD is too left OSD is too right V.Position OSD is too low OSD is too high Button to Press Русский Russian Japanese Simplified Chinese Traditional Chinese OSD Position OSD Time Out OSD Background Opening Logo LED NOTE You can set the OSD display duration time.
● Lock Mode 1. The OSD lock will be activated by pressing the front buttons try to access the OSD by pressing any of the buttons , , appear on the screen. 2. The OSD lock will be deactivated by pressing the front buttons and and and for about 10 seconds. If you , message "OSD Locked" will again for 10 seconds. 1. The power switch lock will be activated by pressing the front buttons and for 10 seconds.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched to fit the full screen.
C Pressing and holding of the Button for about 2 seconds. (Auto Image Adjust) D Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Image Adjust. ENGLISH E Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. F 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
G Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern. ENGLISH NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps F and G because the Clock may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again. Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment.
POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again. Power Indicator NORMAL MODE POWER MANAGEMENT MODE Blue Orange POWER 0 0.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. ENGLISH 3.
Check No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The Mute is OFF. The audio output level of the audio equipment is within the specification of the monitor. The sound is too loud or too quiet. The audio output level of the audio equipment is within the specification of the monitor. A strange noise is heard. The Audio Cable is properly connected.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS ENGLISH Touch Screen Technology Optical Light transmission 88% Communication system USB serial transfer Size Category LCD Panel 24" Panel technology TN Size Diagonal: 23.6" (60cm) Pixel pitch 0.272mm H × 0.
* When the stand is closed. 556.0mm/21.9” 523.5mm/20.6” 403.5mm/15.9” 295.0mm/11.6” 347.0mm/13.7” 56.0mm/2.2” 302.5mm/11.9” ENGLISH DIMENSIONS 122.5mm/4.8” COMPLIANT TIMING Horizontal Frequency Vertical Frequency Dot Clock 31.469kHz 59.940Hz 25.175MHz 37.500kHz 75.000Hz 31.500MHz 37.861kHz 72.809Hz 31.500MHz 35.156kHz 56.250Hz 36.000MHz 37.879kHz 60.317Hz 40.000MHz 46.875kHz 75.000Hz 49.500MHz 48.363kHz 60.004Hz 65.000MHz 56.476kHz 70.069Hz 75.000MHz 60.023kHz 75.