USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2004/108/EC “EMC Directive”, 2006/95/EC “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
TABLE OF CONTENTS FOR YOUR SAFETY............................................................................1 SAFETY PRECAUTIONS................................................................1 SPECIAL NOTES ON LCD MONITORS .........................................3 ENGLISH CUSTOMER SERVICE ...................................................................4 CLEANING ......................................................................................4 BEFORE YOU OPERATE THE MONITOR ....................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
CUSTOMER SERVICE NOTE If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for advice or replacement packaging. ENGLISH CLEANING WARNING If you drop any materials or liquids such as water into the monitor when cleaning, unplug the power cable immediately and contact your dealer or iiyama service center. CAUTION For safety reasons, turn off the power switch and unplug the monitor before you clean it.
BEFORE YOU OPERATE THE MONITOR Supports Resolutions up to 1920 × 1080 2 High Contrast 3000:1 (Typical: with Touch panel) / Brightness 315cd/m (Typical: with Touch panel) Digital Character Smoothing Automatic Set-up Plug & Play VESA DDC2B Compliant Windows® 95/98/2000/Me/XP/Vista/7 Compliant Power Management (VESA DPMS Compliant) VESA Mounting Standard (400mm×200mm) Compliant IPX1 Standard Compliant (Only front face) Windows8 touch environment Basic touch operations can be performed under
WALL MOUNTING WARNING When you use with the wall mounting, in consideration of thickness of the mounting stage, tighten the M6 Screw with washer which “L” length is 14mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor.
ENGLISH CONTROLS AND CONNECTORS Remote Control OSD Key* Menu Button (MENU)* Scroll Up / Brightness Button ( Scroll Down / Mute Button ( )* )* Select / Auto Button (SELECT)* Power Switch ( )* Power Indicator NOTE Green: Normal operation Orange: Power Management USB Connector (USB) RS232C output Connector (COM OUT) RS232C input Connector (COM IN) Remote Control OSD Key Connector (Remote Key) Audio output Connector (AUDIO OUT) Audio input Connector (AUDIO IN) D-SUB mini 15pin Connector
CONNECTING YOUR MONITOR ENGLISH Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the computer to the monitor with the USB Cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the monitor cable to the Remote Control OSD key (option), if necessary. Connect the Power Cable to the monitor first and then to the power supply. Turn on your monitor and computer.
[Fitting and Removal of Cable Cover] Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down. Step 1 < Fitting > When cables are connected as shown in Step 2-1 or Step 2-2, place the cable cover and fix it firmly using a screw. Cable Cover Step 2-2 Step 2-1 Screw [Controlling the Monitor via RS-232C Remote Control] The monitor can be controlled by connecting a PC with a RS-232C terminal.
[Rotating the Display] It is designed to be compatible in both landscape and portrait modes, however, it is optimized for landscape mode. Note that the OSD orientation cannot be changed in the OSD menu. ENGLISH A A A A Not Available Available Landscape Portrait TOUCH SCREEN DRIVER INSTALLATION This monitor is available with USB connection. NOTE 1. This monitor is Microsoft® Windows® HID(Human Interface Device) compatible if you use the USB touch screen interface.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 26: COMPLIANT TIMING. http://www.iiyama.com NOTE For additional information on how to download the driver for your touch screen monitor, please access the internet site noted above. Monitor Drivers are not required in most cases for Macintosh or Unix operating systems. For further information, please contact your computer dealer first for advice.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 26. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 17 for SCREEN ADJUSTMENTS. Press the MENU Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the / Buttons. ENGLISH CO NTRAS T BRIG HTNE S S 1280x1024 FH: 63KHz F V: 5 9 .
ADJUSTMENT MENU CONTENTS CO NTRAS T 1280x1024 FH: 63KHz F V: 5 9 . 9 H z Adjustment Item Button to Press Too dull Too intense CONTRAST BRIGHTNESS * Problem / Option Direct Too dark Too bright * Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. BRIGHTNESS: Press the Button when the Menu is not displayed.
AUTO ADJUST H-POSITION V-POSITION H-SIZE FINE Only Analog Input ENGLISH Adjustment Item AUTO ADJUST *1 Direct Problem / Option Adjust H/V-POSITION, H-SIZE and FINE automatically. H-POSITION Too left Too right V-POSITION Too low Too high H-SIZE *2 Too narrow Too wide FINE *2 Button to Press To correct flickering text or lines *1 For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 17 for SCREEN ADJUSTMENTS. *2 See page 17 for SCREEN ADJUSTMENTS.
OS D H - P OS I TI ON OS D V- P OS I TI ON OS D TI ME OU T RESET I N P U T S E LE C T Problem / Option Button to Press ENGLISH Adjustment Item OSD H-POSITION OSD is too left OSD is too right OSD V-POSITION OSD is too low OSD is too high OSD TIMEOUT You can set the OSD display duration time between 5 and 60 seconds. RESET Factory-preset data is restored. AUTO* Select the signal input automatically. INPUT SELECT VGA Select the analog input. DVI Select the digital input.
9300 6500 5500 7500 USER ENGLISH Adjustment Item COLOR TEMP. RED GREEN BLUE 94 90 100 Problem / Option 9300 6500 5500 Bluish white Reddish white Greenish white 7500 Yellowish white RED Too weak GREEN Too strong BLUE USER Button to Press VOLUME MUTE Adjustment Item Problem / Option Button to Press Too soft Too loud VOLUME ON Turn off the sound temporarily. OFF Return the sound volume to the previous level.
SCREEN ADJUSTMENTS The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched to fit the full screen. It is recommended to operate at resolution of 1920 × 1080 in normal use.
C Press the SELECT Button. (AUTO ADJUST) D Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH E Adjust the V-POSITION so that the top and bottom of the picture frame will fit to the display area. F 1) Adjust the H-POSITION so that the left side of the picture frame will move to the left edge of the display area.
NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps F and G because the H-SIZE may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again. Adjust the H-POSITION after the FINE adjustment if the horizontal position moves during the adjustment. H Adjust the Brightness and Color to get the desired picture after you complete the H-SIZE and FINE adjustments.
POWER MANAGEMENT FEATURE ENGLISH When your computer is not in use, the power management feature will automatically reduce the power consumption of your monitor. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below. The power management function, including any timer settings is configured by the operating system. Check your operating system manual for information on how this can be configured.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3.
RECYCLING INFORMATION ENGLISH For better environment protection please don't dispose your monitor. Please visit our web site: www.iiyama.com/recycle for monitor recycling.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite T3234MC-B1 Touch Screen Technology LCD Panel Driving system ENGLISH Projected capacitive Light transmission 90% Communication USB serial transfer system Size Category 32" a-Si TFT Active Matrix Size Diagonal: 31.5" (80cm) Pixel pitch 0.364mm H × 0.
SPECIFICATIONS : ProLite T3234MC-B2X / ProLite T3234MC-B2 Model Name ProLite T3234MC-B2X ProLite T3234MC-B2 Touch Technology Projected capacitive 10pt touch Projected capacitive 2pt touch Screen Light transmission 90% Communication USB serial transfer system Size Category 32" ENGLISH LCD Panel Driving system a-Si TFT Active Matrix Size Diagonal: 31.5" (80cm) Pixel pitch 0.364mm H × 0.
DIMENSIONS : ProLite T3234MC-B1 69.0mm/2.7” 44.0mm/1.7” 786.0mm/30.9” 698.5mm/27.5” ENGLISH 393.5mm/15.5” 480.5mm/18.9” 25.0mm/1.0” DIMENSIONS : ProLite T3234MC-B2X / ProLite T3234MC-B2 69.5mm/2.7” 781.5mm/30.8” 698.5mm/27.5” 393.5mm/15.5” 476.0mm/18.7” 44.5mm/1.
COMPLIANT TIMING Horizontal Frequency Vertical Frequency Dot Clock 31.469kHz 59.940Hz 25.175MHz 35.156kHz 56.250Hz 36.000MHz 37.879kHz 60.317Hz 40.000MHz 1024 × 768 48.363kHz 60.004Hz 65.000MHz 1280 × 720 1280 × 768 44.720kHz 60.000Hz 74.500MHz 47.776kHz 59.870Hz 79.500MHz 1280 × 960 1280 × 1024 60.000kHz 60.000Hz 108.000MHz 108.000MHz Video Mode VGA SVGA ENGLISH XGA VESA SXGA 640 × 480 800 × 600 63.981kHz 60.020Hz 1366 × 768 WXGA+ 1440 × 900 47.712kHz 59.790Hz 85.