USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
This display carries the TCO Certified label. This ensures that the display is designed for minimal impact on the climate and natural environment, while offering all the performance expected from top of the line electronic products. TCO Certified is a third party verified program, where every product model is tested by an accredited independent test laboratory. TCO Certified represents one of the toughest certifications for displays worldwide. Some of the Usability features of the TCO Displays 5.
A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used.
FOR YOUR SAFETY..........................................................................1 SAFETY PRECAUTIONS..............................................................1 SPECIAL NOTES ON LCD MONITORS .......................................3 CUSTOMER SERVICE .................................................................4 CLEANING ....................................................................................4 BEFORE YOU OPERATE THE MONITOR ........................................5 FEATURES........
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
CUSTOMER SERVICE NOTE If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for advice or replacement packaging. CLEANING ENGLISH If you drop any materials or liquids such as water into the monitor when cleaning, WARNING unplug the power cable immediately and contact your dealer or iiyama service center. CAUTION For safety reasons, turn off the power switch and unplug the monitor before you clean it.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1920 × 1080 High Contrast 1000:1 (Typical), Adv.Contrast Function Available / Brightness 250cd/m2 (Typical) / Quick Response Time 5ms (Gray to Gray, OverDrive:5) Digital Character Smoothing ENGLISH Automatic Set-up Stereo Speakers 2 × 1.
FITTING AND REMOVAL OF BASE ENGLISH CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
ENGLISH CONTROLS AND CONNECTORS Power Indicator Normal operation NOTE Blue: Orange: Power Management Power Switch ( ) Menu / Select Button (MENU) Scroll Up / Volune Button* ( / ) Scroll Down / ECO Mode Button* ( / ) Auto / EXIT Button (AUTO / EXIT) Speakers D-SUB mini 15pin Connector (VGA) DVI-D 24pin Connector (DVI-D) HDMI Connector (HDMI) Audio Connector (AUDIO IN) AC Connector (AC IN) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor
CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power supply. ENGLISH Turn on your monitor and computer. NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 24: COMPLIANT TIMING. http://www.iiyama.com NOTE For additional information on how to download the driver for your touch screen monitor, please access the internet site noted above. Monitor Drivers are not required in most cases for Macintosh or Unix operating systems. For further information, please contact your computer dealer first for advice.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 24. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 18 for SCREEN ADJUSTMENTS. ENGLISH Press the MENU Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the / Buttons. Picture Brightness 90 OSD Contrast 80 Display H.
ADJUSTMENT MENU CONTENTS Picture Picture Brightness 90 OSD Contrast 80 Display H.Position 50 Audio Settings V.Position 50 Miscellaneous Phase 41 Information Clock 50 Color Temp 6500 1920x1080 Adjustment Item Problem / Option Brightness*1,5,6 Too dark Too bright Contrast *5 Too dull Too intense H. Position*2,3 Too left Too right V. Position*2,3 Too low Too high Phase*2,3 To correct flickering text or lines Too narrow Too wide Clock*2,3 9300 7500 6500 Color Temp.
*1 *2 *3 *4 ENGLISH Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. See page 18 for SCREEN ADJUSTMENTS. Only Analog Input. For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 18 for SCREEN ADJUSTMENTS. *5 Contrast and Brightness adjustment disabled when i-Style Color is set to Game or Movie or Text or Scenery. *6 Brightness adjustment disabled when Adv. Contrast is active or when ECO Mode is active.
OSD Picture H.Position 90 OSD V.Position 10 Display OSD Timeout 10 Audio Settings Miscellaneous Information 1920x1080 Problem / Option Button to Press ENGLISH Adjustment Item H.Position OSD is too left OSD is too right V.Position OSD is too low OSD is too high OSD Timeout You can set the OSD display duration time between 5 and 30 seconds.
Display Picture Display Mode Full OSD i-Style Color Standard Display Adv. Contrast OFF Audio Settings ECO Mode OFF Miscellaneous Sharpness 50 Information Over Drive 0 1920x1080 ENGLISH Adjustment Item Problem / Option Aspect Button to Press Expansion display of Aspect Display Mode Full Scenery OFF Typical Contrast Ratio ON Increased Contrast Ratio Standard Game Movie i-Style Color *1,2 Text Adv.
Audio Settings Picture Volume OSD Mute Display Audio Input 50 OFF Line in Audio Settings Miscellaneous Information 1920x1080 Volume Direct Problem / Option Button to Press ENGLISH Adjustment Item Too soft Too loud ON Turn off the sound temporarily. OFF Return the sound volume to the previous level. Line in Select the LINE IN input. HDMI Select the HDMI input. Mute Audio Input* * Suitable for HDMI input only.
Miscellaneous English Picture Language OSD Input Select Auto Display Opening Logo OFF Audio Settings Reset Miscellaneous Information 1920x1080 ENGLISH Adjustment Item Problem / Option English Language Input Select NOTE Direct Button to Press Deutsch Français Español Auto English Italiano Italian Russian Dutch Nederlands Traditional Chinese German French Simplified Chinese Japanese Spanish Select the signal input automatically. VGA DVI HDMI Select the D-SUB input.
Information Picture OSD Display Audio Settings Miscellaneous Information 1920x1080 H:67kHz V:60Hz Auto SN: xxxxxxxxxxxxx 1920x1080 Information Problem / Option Button to Press Displays information regarding the current input signal coming from the graphic card in your computer. NOTE See your graphic card user guide for more information about changing the resolution and refresh.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. ENGLISH The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched to fit the full screen.
Press the Auto Button. (Auto Adjust) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. Adjust the V.Position so that the top and bottom of the picture frame will fit to the display ENGLISH area. 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
ENGLISH Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern. and NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps because the Clock may not be adjusted correctly. If the flicker or blurs still remain, set again. the refresh rate of computer to low (60Hz) and repeat steps from Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment.
POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again. Power Indicator NORMAL MODE POWER MANAGEMENT MODE Blue Orange POWER 0 0.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. ENGLISH 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3.
RECYCLING INFORMATION For better environment protection please don't dispose your monitor. Please visit our web site: www.iiyama.com/recycle for monitor recycling. APPENDIX Size Category 23" LCD Panel Driving system a-Si TFT Active Matrix ENGLISH SPECIFICATIONS Size Diagonal: 23" (58.4cm) Pixel pitch 0.265mm H × 0.
DIMENSIONS 546.0mm/21.5” 511.0mm/20.1” ENGLISH 164.0mm/6.5” 394.5mm/15.5” 288.5mm/11.4” 331.5mm/13.1” 64.5mm/2.5” 249.5mm/9.