USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
TABLE OF CONTENTS FOR YOUR SAFETY............................................................................1 SAFETY PRECAUTIONS................................................................1 SPECIAL NOTES ON LCD MONITORS .........................................3 ENGLISH CUSTOMER SERVICE ...................................................................3 CLEANING ......................................................................................3 BEFORE YOU OPERATE THE MONITOR ....................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1920 × 1080 High Contrast 3000:1 (Typical), Adv. Contrast Function Available / Brightness 300cd/m2 (Typical) / Quick Response Time 5ms (Gray to Gray) ENGLISH Flicker Free Blue Light Reducer X-Res Technology Digital Character Smoothing Stereo Speakers 2 × 3W Stereo Speakers Plug & Play VESA DDC2B Compliant Windows® Vista/7/8/8.
WALL MOUNTING When you use with the wall mounting, in consideration of thickness of the mounting WARNING stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor. Please check if the wall or ceiling can support the weight of the monitor before mounting it.
FITTING AND REMOVAL OF BASE : ProLite XB2888HS CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. ENGLISH Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
FITTING AND REMOVAL OF BASE : ProLite X2888HS CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
ENGLISH CONTROLS AND CONNECTORS : ProLite XB2888HS Power Switch ( ) Power Indicator Normal operation NOTE Blue: Orange: Power Management Input / Select / Blue Light Reducer Button ( Scroll up / Audio Adjust Button ( Scroll down / i-Style Color Button ( Menu Button ( )* )* )* ) Speakers Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed without your permission.
ENGLISH CONTROLS AND CONNECTORS : ProLite X2888HS Power Switch ( ) Power Indicator Normal operation NOTE Blue: Orange: Power Management Input / Select / Blue Light Reducer Button ( Scroll up / Audio Adjust Button ( Scroll down / i-Style Color Button ( Menu Button ( )* )* )* ) Speakers Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed without your permission.
CONNECTING YOUR MONITOR : ProLite XB2888HS Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power supply. Turn on your monitor and computer. ENGLISH NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used.
CONNECTING YOUR MONITOR : ProLite X2888HS NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 31: COMPLIANT TIMING. ENGLISH ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite XB2888HS For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference. 130mm Hold the panel so that the monitor does not topple when you change the monitor’s height or angle.
ADJUSTING THE VIEWING ANGLE : ProLite X2888HS For optimal viewing it is recommended to look at the full face of the monitor. Hold the stand so that the monitor does not topple when you change the monitor’s angle. 3° 20° In order to ensure a healthy and relaxed body position when using the monitor at visual display workstations, it is recommended that the adjusted tilt angle should not exceed 10 degrees. Adjust the monitor’s angle to your own preference.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 31. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 22 for SCREEN ADJUSTMENTS. Press the Button to start the On Screen Display (OSD) feature. There are / Buttons.
ADJUSTMENT MENU CONTENTS Auto Image Adjust Auto Image Adjust Only Analog Input Auto Image Adjust * Direct Problem / Option Button to Press Adjust H. / V. Position, Clock and Phase automatically. * For best results, use the Auto Image Adjust in conjunction with the adjustment pattern. See page 22 for SCREEN ADJUSTMENTS. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. Auto Image Adjust: Pressing and holding of the not displayed.
Picture Adjust Picture Adjust ENGLISH Adjustment Item Problem / Option Contrast *3 Too dull Too intense Brightness *1,2,3 Too dark Too bright Adv. Contrast *2,3,4 ECO Mode * 3 Overdrive Off Typical Contrast Ratio On Increased Contrast Ratio Button to Press Off Normal 1 Brightness of back-light is reduced. 2 Brightness of back-light is reduced more than 1. 3 Brightness of back-light is reduced more than 2.
Direct Adjustment Item Input Select Problem / Option VGA DVI HDMI/MHL DisplayPort Input Select Auto NOTE Button to Press Select the VGA input. Select the DVI input. Select the HDMI/MHL input. Select the DisplayPort input. Search for an available input source and select automatically. Input source is fixed, not selected automatically when VGA, DVI, HDMI/MHL and DisplayPort which are selected.
Color Adjust * Color Adjust ENGLISH Adjustment Item Problem / Option sRGB sRGB Adobe RGB Adobe RGB Cool Bluish white Normal Greenish white Warm Reddish white User Color Red Green Blue Off Standard i-Style Color Direct Game Button to Press Too weak Too strong Return to a state set by color adjustment except i-Style Color. For general windows environment and monitor default setting. For PC game environment. Cinema For movie and video environment.
Manual Image Adjust Adjustment Item Manual Image Adjust Problem / Option Button to Press H. Position Too left Too right V. Position Too low Too high Too narrow Too wide Clock *1 Phase *1 ENGLISH H./V. Position *1,2 To correct flickering text or lines 0123 Sharpness Video Mode Adjust Blue Light Reducer *4 Direct X-Res Technology You can change the picture quality from 0 to 3 (soft to sharp).
Setup Menu Adjustment Item ENGLISH Language Select Setup Menu Problem / Option English Français Deutsch Nederlands Polski English French German Dutch Polish H.Position OSD is too left OSD is too right V.Position OSD is too low OSD is too high Button to Press Русский Russian Japanese Simplified Chinese Traditional Chinese OSD Position OSD Time Out OSD Background* Opening Logo* LED* NOTE You can set the OSD display duration time. 5 / 15 / 30 / 60 seconds Off On Retune the background of OSD.
● Lock Mode 1. The OSD lock will be activated by pressing the front buttons and for about 5 seconds. If you try to access the OSD by pressing any of the buttons , , and , message "OSD Locked" will appear on the screen. and again for 5 seconds. 2. The OSD lock will be deactivated by pressing the front buttons 1. The power switch lock will be activated by pressing the front buttons and for 10 seconds.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched ENGLISH to fit the full screen.
Pressing and holding of the Button for about 2 seconds. (Auto Image Adjust) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Image Adjust. ENGLISH Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern. ENGLISH NOTE and In case the strong flicker or blurs remain on a part of the screen, repeat steps because the Clock may not be adjusted correctly. If the flicker or blurs still remain, again. set the refresh rate of computer to low (60Hz) and repeat steps from Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment.
POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again. Power Indicator NORMAL MODE POWER MANAGEMENT MODE Blue Orange POWER 0 0.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. ENGLISH 3.
Check No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The Mute is OFF. The audio output level of the audio equipment is within the specification of the monitor. The sound is too loud or too quiet. The audio output level of the audio equipment is within the specification of the monitor. A strange noise is heard. The Audio Cable is properly connected.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite XB2888HS ENGLISH Size Category LCD Panel 28" Panel technology VA Size Diagonal: 28" (71cm) Pixel pitch 0.32mm H × 0.32mm V Brightness 300cd/m2 (Typical) Contrast ratio 3000 : 1 (Typical), Adv.
SPECIFICATIONS : ProLite X2888HS LCD Panel 28" Panel technology VA Size Diagonal: 28" (71cm) Pixel pitch 0.32mm H × 0.32mm V Brightness 300cd/m2 (Typical) Contrast ratio 3000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 89 degrees each, Up / Down: 89 degrees each (Typical) Response time 5ms (Gray to Gray) Display Colors Input Connector 16,777,216 VGA: Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz DVI: Horizontal: 30.0-80.
DIMENSIONS : ProLite XB2888HS 663.0mm/26.1” 623.0mm/24.5” ENGLISH ( 230.0mm/9.0” 343.5mm/13.5” 383.5mm/15.1” 413.5mm/16.3”(543.5mm/21.4”) 60.5mm/2.4” 300.0mm/11.8” ) : Maximum adjustment range DIMENSIONS : ProLite X2888HS 663.0mm/26.1” 623.0mm/24.5” 242.0mm/9.5” 463.5mm/18.2” 343.5mm/13.5” 383.5mm/15.1” 60.5mm/2.4” 270.0mm/10.
COMPLIANT TIMING VESA VGA 640 × 480 SVGA 800 × 600 XGA 1024 × 768 SXGA 1280 × 1024 WXGA+ 1440 × 900 WSXGA+ Full HD 1680 × 1050 1920 × 1080 Horizontal Frequency 31.469kHz 37.500kHz 37.861kHz 35.156kHz 37.879kHz 46.875kHz 48.363kHz 56.476kHz 60.023kHz 63.981kHz 79.976kHz 55.935kHz 70.635kHz 65.290kHz 66.590kHz Vertical Frequency 59.940Hz 75.000Hz 72.809Hz 56.250Hz 60.317Hz 75.000Hz 60.004Hz 70.069Hz 75.029Hz 60.020Hz 75.025Hz 59.887Hz 74.984Hz 60.000Hz 59.930Hz Dot Clock 25.175MHz 31.
