USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
Congratulations! for Sustainable IT TCO Certified is an international third party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect environmental, social and economic responsibility. Every TCO Certified product model is verified by an accredited independent test laboratory.
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2004/108/EC “EMC Directive”, 2006/95/EC “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
TABLE OF CONTENTS FOR YOUR SAFETY............................................................................1 SAFETY PRECAUTIONS................................................................1 SPECIAL NOTES ON LCD MONITORS .........................................3 CLEANING ......................................................................................3 BEFORE YOU OPERATE THE MONITOR ..........................................4 FEATURES................................................................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION ENGLISH The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1920 × 1200 High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness 300cd/m2 (Typical) ENGLISH Digital Character Smoothing Automatic Set-up Stereo Speakers 2 × 1.
WALL MOUNTING When you use with the wall mounting, in consideration of thickness of the mounting WARNING stage, tighten the M4 Screw with washer which “L” length is 10mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor. Please check if the wall or ceiling can support the weight of the monitor before mounting it.
FITTING AND REMOVAL OF BASE : ProLite XB2485WSU ENGLISH CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
FITTING AND REMOVAL OF BASE : ProLite X2485WS CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. A Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
ENGLISH CONTROLS AND CONNECTORS : ProLite XB2485WSU Power Indicator NOTE Blue: Normal operation Orange: Power Management Power Switch ( ) Menu Button (MENU) Scroll Up / Volume Button ( / ) Scroll Down / ECO Button ( / ) Auto Button (AUTO) Headphone connector ( ) Speakers USB Downstream Connector ( ) USB Downstream Connector ( ) USB Downstream Connector ( ) USB Upstream Connector ( ) DVI-D 24pin Connector (DVI) D-SUB mini 15pin Connector (D-SUB) DisplayPort Connector (DP)
ENGLISH CONTROLS AND CONNECTORS : ProLite X2485WS Power Indicator NOTE Blue: Normal operation Orange: Power Management Power Switch ( ) Menu Button (MENU) Scroll Up / Volume Button ( / ) Scroll Down / ECO Button ( / ) Auto Button (AUTO) Headphone connector ( ) Speakers DVI-D 24pin Connector (DVI) D-SUB mini 15pin Connector (D-SUB) DisplayPort Connector (DP) Audio Connector (AUDIO IN) AC Connector (AC IN) Keyhole for Security Lock NOTE You can fasten a security lock and cable to
CONNECTING YOUR MONITOR : ProLite XB2485WSU Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power supply. Turn on your monitor and computer. ENGLISH NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used.
CONNECTING YOUR MONITOR : ProLite X2485WS NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 31: COMPLIANT TIMING. ENGLISH ADJUSTING THE VIEWING ANGLE : ProLite X2485WS For optimal viewing it is recommended to look at the full face of the monitor. Hold the stand so that the monitor does not topple when you change the monitor’s angle. You are able to adjust the monitor’s angle up to 22 degrees upward and 5 degrees downward.
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite XB2485WSU For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference. Hold the panel so that the monitor does not topple when you change the monitor’s height or angle. 110mm ENGLISH You are able to adjust the monitor's height up to 110mm, angle up to 160 degrees right and left, 22 degrees upward and 5 degrees downward.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 31. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 22 for SCREEN ADJUSTMENTS. ENGLISH Press the MENU Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the / Buttons. Picture Brightness 90 OSD Contrast 80 Display H.
ADJUSTMENT MENU CONTENTS Picture Picture Brightness 90 OSD Contrast 80 Display H.Position 50 Audio Settings V.Position 50 Miscellaneous Phase 41 Information Clock 50 Color Temp 6500 1920x1200 Adjustment Item Problem / Option Brightness*1,5,6 Too dark Too bright Contrast *5 Too dull Too intense H. Position*2,3 Too left Too right V.
ENGLISH *1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. *2 See page 22 for SCREEN ADJUSTMENTS. *3 Only Analog Input. *4 For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 22 for SCREEN ADJUSTMENTS. *5 Contrast and Brightness adjustment disabled when i-Style Color is set to Game or Movie or Text or Scenery. *6 Brightness adjustment disabled when Adv. Contrast is active or when ECO Mode is active.
OSD Picture H.Position 90 OSD V.Position 10 Display OSD Timeout 10 Audio Settings Transparency 25 Miscellaneous Information 1920x1200 Problem / Option Button to Press ENGLISH Adjustment Item H.Position OSD is too left OSD is too right V.Position OSD is too low OSD is too high OSD Timeout You can set the OSD display duration time between 5 and 30 seconds. Transparency You can set the transmittance of the OSD background.
Display Picture Display Mode Full OSD i-Style Color Standard Display Adv. Contrast Off Audio Settings ECO Mode Off Miscellaneous Sharpness Information Over Drive 50 0 Gamma 2.2 1920x1080 ENGLISH Adjustment Item Problem / Option Display Mode Full Expansion display Aspect Expansion display of Aspect 1:1 Displayed at the same magnification Cinema Game Scenery For general windows environment and monitor default setting.
Audio Settings Picture Volume OSD Mute Display Audio Input 50 OFF Line in Audio Settings Miscellaneous Information 1920x1200 Volume Direct Problem / Option Button to Press ENGLISH Adjustment Item Too soft Too loud ON Turn off the sound temporarily. OFF Return the sound volume to the previous level. Line in Select the LINE IN input. DP Select the DP input. Mute Audio Input* * Suitable for DisplayPort input only.
Miscellaneous English Picture Language OSD Input Select Display Opening Logo Off Audio Settings After AC Cut Off Miscellaneous Reset Auto Information 1920x1200 ENGLISH Adjustment Item Language Input Select Direct Problem / Option English Deutsch Français Español Italiano Auto VGA DVI Displayport Button to Press English Nederlands Dutch German Traditional Chinese French Simplified Chinese Spanish Japanese Russian Italian Select the signal input automatically. Select the D-SUB input.
Information Picture OSD Display Audio Settings Miscellaneous Information 1920x1200 H:74kHz V:60Hz Auto SN: xxxxxxxxxxxxx 1920x1200 Information Problem / Option Button to Press Displays information regarding the current input signal coming from the graphic card in your computer. NOTE See your graphic card user guide for more information about changing the resolution and refresh. ● Lock Mode 1. The OSD lock will be activated by pressing the front buttons MENU and for about 10 seconds.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. The monitor is designed to provide the best performance at resolution of 1920 × 1200, but can not provide the best at resolutions of less than 1920 × 1200 because the picture is automatically stretched ENGLISH to fit the full screen.
C Press the Auto Button. (Auto Adjust) D Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Image Adjust. ENGLISH E Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. F 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
G Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern. ENGLISH NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps F and G because the Clock may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again. Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment.
POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again. Power Indicator NORMAL MODE POWER MANAGEMENT MODE Blue Orange POWER 0 0.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. ENGLISH 3.
Check No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The audio output level of the audio equipment is within the specification of the monitor. The sound is too loud or too quiet. The audio output level of the audio equipment is within the specification of the monitor. A strange noise is heard. The Audio Cable is properly connected.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite XB2485WSU Size Category 24.1" ENGLISH LCD Panel Panel technology IPS Size Diagonal: 24.1" (61.13cm) Pixel pitch 0.27mm H × 0.27mm V Brightness 300cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical) Viewable angle Right / Left: 89 degrees each, Up / Down: 89 degrees each (Typical) Response time 5ms (Gray to Gray)*1 Display Colours Approx.16.7M Sync Frequency Analog: Horizontal: 30.0-94.
SPECIFICATIONS : ProLite X2485WS Size Category 24.1" LCD Panel Panel technology IPS Size Diagonal: 24.1" (61.13cm) Pixel pitch 0.27mm H × 0.27mm V Brightness 300cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical) Right / Left: 89 degrees each, Up / Down: 89 degrees each (Typical) Response time 5ms (Gray to Gray)*1 Display Colours Approx.16.7M Sync Frequency Analog: Horizontal: 30.0-94.0kHz, Vertical: 50-75Hz Digital: Horizontal: 30.0-80.
DIMENSIONS : ProLite XB2485WSU 561.0mm/22.1” 520.0mm/20.5” ENGLISH ( 244.5mm/9.6” 325.5mm/12.8” 380.0mm/15.0” 416.0mm/16.4”(526.0mm/20.7”) 51.0mm/2.0” ) : Maximum adjustment range DIMENSIONS : ProLite X2485WS 561.0mm/22.1” 520.0mm/20.5” 51.0mm/2.0” 30 APPENDIX 216.5mm/8.5” 449.0mm/17.7” 325.5mm/12.8” 380.0mm/15.0” 234.5mm/9.
Horizontal Frequency Vertical Frequency Dot Clock 31.469kHz 59.940Hz 25.175MHz 37.500kHz 75.000Hz 31.500MHz 37.861kHz 72.809Hz 31.500MHz 35.156kHz 56.250Hz 36.000MHz 37.879kHz 60.317Hz 40.000MHz 46.875kHz 75.000Hz 49.500MHz 48.077kHz 72.188Hz 50.000MHz 48.363kHz 60.004Hz 65.000MHz 56.476kHz 70.069Hz 75.000MHz 60.023kHz 75.029Hz 78.750MHz 63.981kHz 60.020Hz 108.000MHz 79.976kHz 75.025Hz 135.000MHz WXGA+ 1440 × 900 55.935kHz 59.887Hz 106.
