USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
Congratulations! for Sustainable IT TCO Certified is an international third party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect environmental, social and economic responsibility. Every TCO Certified product model is verified by an accredited independent test laboratory.
A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used.
FOR YOUR SAFETY..........................................................................1 SAFETY PRECAUTIONS..............................................................1 SPECIAL NOTES ON LCD MONITORS .......................................3 CUSTOMER SERVICE .................................................................3 CLEANING ....................................................................................3 BEFORE YOU OPERATE THE MONITOR ........................................4 FEATURES........
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 2560 × 1440 High Contrast 1000:1 (Typical), Adv.Contrast Function Available / Brightness 350cd/m2 (Typical) / Quick Response Time 5ms (Gray to Gray, Over Drive:+2) ENGLISH Digital Character Smoothing Automatic Set-up Stereo Speakers 2 × 1.
FITTING AND REMOVAL OF BASE Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down. Hold the monitor and push the Stand-Base.
ENGLISH CONTROLS AND CONNECTORS Power Indicator Normal operation NOTE Blue: Orange: Power Management Power Switch ( ) Menu / Select Button (MENU) Scroll Up / Volume Button* ( / Scroll Down / ECO Mode Button* ( ) / ) Input / Exit Button (INPUT / EXIT) Speakers HDMI Connector (HDMI) DVI-D 24pin Connector (DVI) D-SUB mini 15pin Connector (VGA) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed without your permission.
CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power supply. NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 23: COMPLIANT TIMING. ENGLISH ADJUSTING THE HEIGHT AND THE VIEWING ANGLE For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference. 110mm Hold the panel so that the monitor does not topple when you change the monitor’s height or angle.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 23. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 17 for SCREEN ADJUSTMENTS. Picture Brightness 90 OSD Contrast 80 Display H.Position 50 Audio Settings V.
ADJUSTMENT MENU CONTENTS Picture Picture Brightness 90 OSD Contrast 80 Display H.Position 50 Audio Settings V.Position 50 Miscellaneous Phase 41 Information Clock 50 Color Temp 6500 ENGLISH Auto Adjust 1920x1080 Adjustment Item Problem / Option Brightness*1,5,6,7 Too dark Too bright Contrast *5,7 Too dull Too intense H. Position*2,3 Too left Too right V.
Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. Auto Adjust: Pressing and holding of the INPUT / EXIT Button for 3 seconds when the Menu is not displayed. OPERATING THE MONITOR 11 ENGLISH *1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. *2 See page 17 for SCREEN ADJUSTMENTS. *3 Only Analog Input.
OSD Picture H.Position 90 OSD V.Position 10 Display OSD Timeout 10 Audio Settings Transparency 25 Miscellaneous Information 1920x1080 ENGLISH Adjustment Item Problem / Option H.Position OSD is too left OSD is too right V.Position OSD is too low OSD is too high OSD Timeout You can set the OSD display duration time between 5 and 30 seconds. Transparency You can set the transmittance of the OSD background.
Display Picture Display Mode Full OSD i-Style Color Standard Display Adv. Contrast Off Audio Settings ECO Mode Off Miscellaneous Sharpness Information Over Drive 50 0 Gamma 2.2 1920x1080 Problem / Option Display Mode Full Expansion display Aspect Expansion display of Aspect 1:1 Displayed at the same magnification Cinema Game Scenery For general windows environment and monitor default setting. For text editing and viewing in a word processing environment.
Audio Settings Picture Volume OSD Mute Display Audio Input 50 Off Line In Audio Settings Miscellaneous Information 1920x1080 ENGLISH Adjustment Item Volume Direct Problem / Option Button to Press Too soft Too loud Off Return the sound volume to the previous level. On Turn off the sound temporarily. Mute Audio Input*1,2 Line In Select the LINE IN input. HDMI*1 Select the HDMI input. DP*2 Select the DP input. 1 * Suitable for HDMI input only. *2 Suitable for DisplayPort input only.
Miscellaneous English Picture Language OSD Input Select Display Opening Logo Off Audio Settings After AC Cut Off Miscellaneous Reset Auto Information 1920x1080 Language Input Select Direct Problem / Option English Deutsch Français Español Italiano Auto VGA DVI HDMI DisplayPort Button to Press English Nederlands Dutch Traditional Chinese German French Simplified Chinese Japanese Spanish Russian Italian Select the signal input automatically. Select the D-SUB input. Select the DVI input.
Information Picture OSD Display Audio Settings Miscellaneous Information 1920x1080 H:67kHz V:60Hz Auto SN: xxxxxxxxxxxxx 1920x1080 ENGLISH Adjustment Item Information Problem / Option Button to Press Displays information regarding the current input signal coming from the graphic card in your computer. NOTE See your graphic card user guide for more information about changing the resolution and refresh.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to the screen enlargement process.
Pressing and holding of the INPUT/EXIT Button for 3 seconds. (Auto Adjust) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
and NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps because the Clock may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again. Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment. Adjust the Brightness and Color to get the desired picture after you complete the Clock and Phase adjustments. Put back your favorite wallpaper.
POWER MANAGEMENT FEATURE ENGLISH The power management feature of this product complies with power saving requirement of ENERGY STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. Problem Check A The picture does not appear. (Power indicator does not light up.) The Power Cable is firmly seated in the socket. The Power Switch is turned ON. The AC socket is live. Please check with another piece of equipment. (Power indicator is blue.) If the blank screen saver is in active mode, touch the keyboard or the mouse. Increase the Contrast and/or Brightness.
RECYCLING INFORMATION For better environment protection please don't dispose your monitor. Please visit our web site: www.iiyama.com/recycle for monitor recycling. APPENDIX Design and specifications are subject to change without prior notice. ENGLISH SPECIFICATIONS Size Category 27" LCD Panel Panel technology IPS Size Diagonal: 27" (68.5cm) Pixel pitch 0.233mm H × 0.233mm V Brightness 350cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv.
DIMENSIONS 644.0mm/25.4” 598.0mm/23.5” ENGLISH ( 249.5mm/9.8” 336.5mm/13.2” 394.0mm/15.5” 565.0mm/22.2”(455.0mm/17.9”) 56.0mm/2.2” ) : Maximum adjustment range COMPLIANT TIMING Video Mode VGA SVGA XGA VESA SXGA 640 × 480 800 × 600 1024 × 768 1280 × 1024 Horizontal Frequency Vertical Frequency Dot Clock 31.469kHz 59.940Hz 25.175MHz 37.500kHz 75.000Hz 31.500MHz 37.879kHz 60.317Hz 40.000MHz 46.875kHz 75.000Hz 49.500MHz 48.363kHz 60.004Hz 65.000MHz 60.023kHz 75.029Hz 78.
