USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
TABLE OF CONTENTS FOR YOUR SAFETY............................................................................1 SAFETY PRECAUTIONS................................................................1 ENGLISH SPECIAL NOTES ON LCD MONITORS .........................................3 CUSTOMER SERVICE ...................................................................3 CLEANING ......................................................................................3 BEFORE YOU OPERATE THE MONITOR ....................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1024 × 768 : ProLite T1532MSC Supports Resolutions up to 1280 × 1024 : ProLite T1732MSC / ProLite T1932MSC ENGLISH 2 High Contrast 700:1 (Typical) / Brightness 330cd/m (Typical: with Touch panel) : ProLite T1532MSC-B5X 2 High Contrast 700:1 (Typical) / Brightness 315cd/m (Typical: with Touch panel) : ProLite T1532MSC-B5AG 2 High Contrast 1000:1 (Typical) / Brightness 225cd/m (Typical: with Touch panel) : ProLite T1732MSC-B5X / Pr
CHECKING THE CONTENTS OF THE PACKAGE CAUTION *1 The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a power supply higher than this rating, then a power cable with a rating of 10A/250V must be used. However, all guarantees and warranties are void for any problems or damage caused by a power cable not supplied by iiyama. *2 This CD-ROM contains the touch screen driver software. Install the Touch Panel Driver Disk after connecting the computer to the monitor with USB Cable.
ENGLISH CONTROLS AND CONNECTORS Menu Button ( ) Scroll Up / Brightness Button ( Scroll Down / Mute Button ( Select Button ( ) Power Switch ( ) ) ) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed without your permission.
CONNECTING YOUR MONITOR NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office. For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama office for a suitable adaptor.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 26: COMPLIANT TIMING. ENGLISH Windows XP/Vista/7/8/8.1/10 Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows XP/Vista/7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied.
ADJUSTING THE VIEWING ANGLE NOTE Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. Careful attention is required not to catch your fingers or hands when you change the angle. ENGLISH For optimal viewing it is recommended to look at the full face of the monitor. Hold the panel so that the monitor does not topple when you change the monitor’s angle. You are able to adjust the monitor’s angle up to 90 degrees upward, 5 degrees downward.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 26. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 16 for SCREEN ADJUSTMENTS. Press the Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the / Buttons. CO NTRAS T ENGLISH BRIG HTNE S S 1280x1024 FH: 63KHz F V: 5 9 .
ADJUSTMENT MENU CONTENTS CO NTRAS T 1280x1024 FH: 63KHz F V: 5 9 . 9 H z Adjustment Item Button to Press Too dull Too intense CONTRAST BRIGHTNESS * Problem / Option Direct Too dark Too bright * Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. BRIGHTNESS: Press the Button when the Menu is not displayed.
Only Analog Input ENGLISH Adjustment Item AUTO ADJUST *1 AUTO ADJUST H-POSITION V-POSITION H-SIZE FINE Problem / Option Adjust H/V-POSITION, H-SIZE and FINE automatically. H-POSITION Too left Too right V-POSITION Too low Too high H-SIZE *2 Too narrow Too wide FINE *2 Button to Press To correct flickering text or lines *1 For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 16 for SCREEN ADJUSTMENTS. *2 See page 16 for SCREEN ADJUSTMENTS.
OS D H - P OS I TI ON OS D V- P OS I TI ON OS D TI ME OU T RESET I N P U T S E LE C T Problem / Option Button to Press ENGLISH Adjustment Item OSD H-POSITION OSD is too left OSD is too right OSD V-POSITION OSD is too low OSD is too high OSD TIMEOUT You can set the OSD display duration time between 5 and 60 seconds. RESET Factory-preset data is restored. INPUT SELECT Direct AUTO Search for an available input source and select automatically. VGA Select the analog input.
ESPAÑOL ENGLISH FRANÇAIS DEUTSCH ITALIANO ENGLISH Adjustment Item OSD LANGUAGE Problem / Option ENGLISH FRANÇAIS DEUTSCH ITALIANO 9300 6500 5500 7500 USER Adjustment Item COLOR TEMP.
VOLUME MUTE Button to Press Too soft Too loud VOLUME MUTE Problem / Option ON Turn off the sound temporarily. OFF Return the sound volume to the previous level. Direct Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. MUTE : Press the Button when the Menu is not displayed.
SCREEN ADJUSTMENTS ENGLISH Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.
Press the Button. (AUTO ADJUST) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH Adjust the V-POSITION so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H-POSITION so that the left side of the picture frame will move to the left edge of the display area.
ENGLISH Adjust the FINE to correct horizontal wavy noise, flicker or blur in the zebra pattern. NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps and because the H-SIZE may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again. Adjust the H-POSITION after the FINE adjustment if the horizontal position moves during the adjustment.
POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 2W. The screen becomes dark. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3.
RECYCLING INFORMATION ENGLISH For better environment protection please don't dispose your monitor. Please visit our web site: www.iiyama.com/recycle for monitor recycling.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite T1532MSC Model Name ENGLISH Touch Screen ProLite T1532MSC-B5X Technology Projected capacitive 10pt touch Light transmission 90% Communication system USB Size Category 85% 15" Panel technology LCD Panel ProLite T1532MSC-B5AG TN Size Diagonal: 15" (38cm) Pixel pitch 0.297mm H × 0.
SPECIFICATIONS : ProLite T1732MSC Technology ProLite T1732MSC-B5X / ProLite T1732MSC-W5X Projected capacitive 10pt touch Light transmission 90% Model Name Communication system Size Category LCD Panel 85% USB 17" Panel technology TN Size Diagonal: 17" (43cm) Pixel pitch 0.264mm H × 0.
SPECIFICATIONS : ProLite T1932MSC Model Name Touch Screen ProLite T1932MSC-B5X Technology Projected capacitive 10pt touch Light transmission 90% Communication system ENGLISH Size Category LCD Panel ProLite T1932MSC-B5AG / ProLite T1932MSC-W5AG 85% USB 19" Panel technology IPS Size Diagonal: 19" (48cm) Pixel pitch 0.2928mm H × 0.
DIMENSIONS : ProLite T1532MSC 351.0mm/13.8” 305.0mm/12.0” ENGLISH 202.0mm/7.9” 306.5mm/12.1” 229.0mm/9.0” 276.0mm/10.9” 54.5mm/2.1” 222.5mm/8.7” DIMENSIONS : ProLite T1732MSC 387.0mm/15.2” 339.0mm/13.3” 202.0mm/7.9” 342.0mm/13.5” 271.5mm/10.7” 320.0mm/12.6” 54.5mm/2.1” 222.5mm/8.7” DIMENSIONS : ProLite T1932MSC 432.0mm/17.0” 377.5mm/14.9” 219.0mm/8.6” 391.0mm/15.4” 302.0mm/11.9” 358.0mm/14.1” 54.5mm/2.1” 249.5mm/9.
COMPLIANT TIMING ENGLISH Video Mode VGA 640 × 480 SVGA 800 × 600 XGA 1024 × 768 SXGA 1280 × 1024 VESA Horizontal Frequency 31.469kHz 37.500kHz 37.861kHz 35.156kHz 37.879kHz 46.875kHz 48.077kHz 48.363kHz 56.476kHz 60.023kHz 63.981kHz 79.976kHz Vertical Frequency 59.940Hz 75.000Hz 72.809Hz 56.250Hz 60.317Hz 75.000Hz 72.188Hz 60.004Hz 70.069Hz 75.029Hz 60.020Hz 75.025Hz Dot Clock 25.175MHz 31.500MHz 31.500MHz 36.000MHz 40.000MHz 49.500MHz 50.000MHz 65.000MHz 75.000MHz 78.750MHz 108.000MHz 135.