User Manual

ENGLISH

OPERATING THE MONITOR 13

OSD H-POSITION

OSD V-POSITION

OSD TIMEOUT

RESET

INPUT SELECT

OSD TIMEOUT

OSD H-POSITION

OSD is too left

OSD is too right

OSD is too low

OSD is too high

You can set the OSD display duration time

between 5 and 60 seconds.

Adjustment Item Problem / Option Button to Press

OSD V-POSITION

RESET Factory-preset data is restored.

INPUT SELECT

However it will automatically be selected when just one source is using.

In Power Management Mode input switching is disabled.

Input source is ﬁ xed, not selected automatically when VGA, HDMI and DisplayPort which

are selected.

Select the analog input.

Select the digital(HDMI) input.

VGA

HDMI

NOTE

Search for an available input source and select

automatically.

AUTO

Direct

You can skip the Menu items and display an adjustment scale directly by using the following button

operations.



INPUT SELECT: Pressing and holding of the

Button for about 5 seconds when the Menu

is not displayed. When both VGA, HDMI and DisplayPort signal inputs are

connected to a signal source, you can switch between them by successively

pressing the

Button.

Direct

Select the digital(DisplayPort) input. DisplayPort