USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
ProLite XU2390HS, ProLite XUB2390HS and ProLite XUB2790HS : TCO compliant This product is TCO Certified for Sustainable IT TCO Certified is an international third party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect environmental, social and economic responsibility. Every TCO Certified product model is verified by an accredited independent test laboratory.
CE MARKING DECLARATION OF CONFORMITY ENGLISH This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
TABLE OF CONTENTS FOR YOUR SAFETY.............................................................................1 SAFETY PRECAUTIONS................................................................1 SPECIAL NOTES ON LCD MONITORS..........................................3 BEFORE YOU OPERATE THE MONITOR...........................................4 FEATURES......................................................................................4 CHECKING THE CONTENTS OF THE PACKAGE.........................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1920 × 1200 High Contrast 1000:1 (Typical), Adv.
INSTALLATION [WALL MOUNTING] ENGLISH WARNING When you use with the wall mounting, in consideration of thickness of the mounting stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor. Before installation, make sure the wall, ceiling or desktop arm is strong enough to hold the necessary weight of the display and the mount.
[ROTATING THE DISPLAY] ● ProLite XUB2595WSU The monitor is designed to be compatible with both landscape and portrait modes. Video card for portrait display will be required for rotating the image on the screen. Not Available Available A A A A Landscape Portrait Power Indicator Portrait With Stand: NOTE Adjust the monitor’s height before panel rotation. Attempting to rotate the panel forcibly without adjusting the stand height may cause damage to the panel or the stand.
FITTING AND REMOVAL OF BASE : ProLite XUB2595WSU Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid an electric shock or a damage. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
FITTING AND REMOVAL OF BASE : ProLite XU2595WSU CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid an electric shock or a damage. ENGLISH Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
ENGLISH CONTROLS AND CONNECTORS : ProLite XUB2595WSU Power Indicator NOTE Blue: Normal operation Orange: Power Management Auto Adjust / Signal Select Button (AUTO)* – / Eco Button ( – )* + / Volume / Blue Light Reducer Button ( + )* Menu Button (MENU) Power Switch ( ) Speakers Stopper USB Downstream Connector ( ) USB Downstream Connector ( ) USB Upstream Connector ( Headphone connector ( ) ) Audio Connector ( ) VGA Connector (D-SUB) HDMI Connector (HDMI) D
ENGLISH CONTROLS AND CONNECTORS : ProLite XU2595WSU Power Indicator NOTE Blue: Normal operation Orange: Power Management Auto Adjust / Signal Select Button (AUTO)* – / Eco Button ( – )* + / Volume / Blue Light Reducer Button ( + )* Menu Button (MENU) Power Switch ( ) Speakers Hook USB Downstream Connector ( ) USB Downstream Connector ( ) USB Upstream Connector ( Headphone connector ( ) ) Audio Connector ( ) VGA Connector (D-SUB) HDMI Connector (HDMI) Displ
CONNECTING YOUR MONITOR : ProLite XUB2595WSU NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
CONNECTING YOUR MONITOR : ProLite XU2595WSU ENGLISH Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the computer to the monitor with the USB Cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power source. Turn on your monitor and computer.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 31: COMPLIANT TIMING. ENGLISH ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite XUB2595WSU For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference. Hold the panel so that the monitor does not topple when you change the monitor’s height or angle.
ENGLISH ADJUSTING THE VIEWING ANGLE : ProLite XU2595WSU For optimal viewing it is recommended to look at the full face of the monitor. Hold the stand so that the monitor does not topple when you change the monitor’s angle. You are able to adjust the monitor’s angle up to 20° upward, 4° downward. In order to ensure a healthy and relaxed body position when using the monitor at visual display workstations, it is recommended that the adjusted tilt angle should not exceed 10 degrees.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 31. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 22 for SCREEN ADJUSTMENTS. Select the Menu item which contains the adjustment icon relating to the adjustment you want to make. Press the MENU Button. Then, use the + / – Buttons to highlight the desired adjustment icon.
ADJUSTMENT MENU CONTENTS Luminance ProLite XUB2595WSU LUMINANCE CONTRAST IMAGE SETTINGS COLOR SETTINGS BRIGHTNESS OSD I-STYLE COLOR EXTRA ADV. CONTRAST ENGLISH ECO Adjustment Item STANDARD ON OFF OFF Problem / Option Contrast Too dull Too intense Brightness*1 Too dark Too bright Button to Press For general windows environment and monitor Standard default setting. i-Style Color*2 Adv. Contrast*2 Text For text editing and viewing in a word processing environment.
Image Settings ProLite XUB2595WSU IMAGE SETTINGS LUMINANCE IMAGE SETTINGS PIXEL CLOCK COLOR SETTINGS PHASE OSD HORIZONTAL POSITION EXTRA VERTICAL POSITION ASPECT RATIO Problem / Option Too narrow Too wide Pixel Clock*1,2 Phase*1,2 To correct flickering text or lines Horizontal Position*2 Too left Too right Vertical Position*2 Too low Too high Aspect Ratio Button to Press ENGLISH Adjustment Item FULL Full Expansion display Aspect Expansion display of Aspect 1 * See page 22 for SC
Color Settings ProLite XUB2595WSU LUMINANCE COLOR SETTINGS GAMMA1 IMAGE SETTINGS GAMMA COLOR SETTINGS 6-AXIS HUE OSD COLOR TEMP. USER EXTRA USER PRESET RED GREEN BLUE ENGLISH Adjustment Item Gamma Problem / Option Gamma1 Normal Gamma2 High contrast Gamma3 Dark Red Yellow Green Cyan Blue Magenta Hue 6-Axis Color Temp.
OSD ProLite XUB2595WSU LUMINANCE IMAGE SETTINGS OSD HORIZONTAL POSITION COLOR SETTINGS OSD VERTICAL POSITION OSD OSD TIME EXTRA LANGUAGE ENGLISH Problem / Option Button to Press ENGLISH Adjustment Item ON SCREEN DISPLAY SETTINGS OSD Horizontal Position OSD is too left OSD is too right OSD Vertical Position OSD is too low OSD is too high OSD Time You can set the OSD display duration time between 5 and 100 seconds.
Extra ProLite XUB2595WSU LUMINANCE EXTRA IMAGE SETTINGS RESET YES NO COLOR SETTINGS DDC/CI ON OFF OSD SIGNAL SELECT EXTRA OVERDRIVE HDMI OFF AUDIO SOURCE LINE IN OPENING LOGO ON OFF FREESYNC ON OFF INFORMATION ENGLISH Adjustment Item Reset DDC/CI Signal Select Direct NOTE Problem / Option Button to Press Yes No Factory-preset data is restored. Return to Menu. On DDC/CI is On. Off Auto D-SUB HDMI DP DDC/CI is Off. Select the signal input automatically.
Direct You can skip the Menu items and directly display an option setting screen or an adjustment scale by using the following button operations. Volume: Press the + Button when the Menu is not displayed. Volume Problem / Option Button to Press Too soft Too loud Auto Adjust: Keep pressing the AUTO Button for 3-4 seconds when the Menu is not displayed. Only Analog Input Adjustment Item Auto Adjust * Problem / Option Adjust Horizontal / Vertical Position, Pixel Clock and Phase automatically.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. The monitor is designed to provide the best performance at resolution of 1920 × 1200, but can not provide the best at resolutions of less than 1920 × 1200 because the picture is automatically stretched ENGLISH to fit the full screen.
Keep pressing the AUTO Button for about 3-4 seconds. (Auto Adjust) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH Adjust the Vertical Position so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the Horizontal Position so that the left side of the picture frame will move to the left edge of the display area.
ENGLISH Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern. NOTE and In case the strong flicker or blurs remain on a part of the screen, repeat steps because the Pixel Clock may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again. Adjust the Horizontal Position after the Phase adjustment if the horizontal position moves during the adjustment.
POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again. Power Indicator NORMAL MODE POWER MANAGEMENT MODE Blue Orange POWER 0 0.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. ENGLISH 3.
Check No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The audio output level of the audio equipment is within the specification of the monitor. The sound is too loud or too quiet. The audio output level of the audio equipment is within the specification of the monitor. A strange noise is heard. The Audio Cable is properly connected.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite XUB2595WSU ENGLISH Size Category LCD Panel 25" Panel technology IPS Size Diagonal: 24.95" (63.36cm) Pixel pitch 0.27888mm H × 0.2823mm V Brightness 300cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left / Up / Down: 89 degrees each (Typical) Response time 4ms (Gray to Gray) Display Colors Input Connector Approx.16.
SPECIFICATIONS : ProLite XU2595WSU LCD Panel 25" Panel technology IPS Size Diagonal: 24.95" (63.36cm) Pixel pitch 0.27888mm H × 0.2823mm V Brightness 300cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left / Up / Down: 89 degrees each (Typical) Response time 4ms (Gray to Gray) Display Colors Input Connector Approx.16.7M Analog: Horizontal: 30.0-89.0kHz, Vertical: 50-76Hz Digital(HDMI): Horizontal: 30.0-89.
DIMENSIONS : ProLite XUB2595WSU 546.5mm/21.5” 543.0mm/21.4” ENGLISH 210.0mm/8.3” 344.0mm/13.5” 363.0mm/14.3” 380.0mm/15.0” 399.0mm/15.7” (529.0mm/20.8”) 45.0mm/1.7” 240.0mm/9.4” ( ) : Maximum adjustment range DIMENSIONS : ProLite XU2595WSU 546.5mm/21.5” 543.0mm/21.4” 180.0mm/7.1” 438.5mm/17.3” 344.0mm/13.5” 363.0mm/14.3” 45.0mm/1.7” 219.5mm/8.
COMPLIANT TIMING 640 × 480 800 × 600 1024 × 768 1280 × 1024 1440 × 900 1680 × 1050 1920 × 1080 1920 × 1200 NOTE Horizontal Frequency 31.469kHz 37.500kHz 37.861kHz 35.156kHz 37.879kHz 46.875kHz 48.077kHz 48.363kHz 56.476kHz 60.023kHz 63.981kHz 79.976kHz 55.935kHz 65.290kHz 66.590kHz 74.038kHz 93.149kHz Vertical Frequency 59.940Hz 75.000Hz 72.809Hz 56.250Hz 60.317Hz 75.000Hz 72.188Hz 60.004Hz 70.069Hz 75.029Hz 60.020Hz 75.025Hz 59.887Hz 60.000Hz 59.930Hz 59.950Hz 74.940Hz Dot Clock 25.175MHz 31.
