User Manual
ENGLISH
20 OPERATING THE MONITOR
See your graphic card user guide for more information
about changing the resolution and refresh.
NOTE
Displays information regarding the current input signal coming
from the graphic card in your computer.
Information
Adjustment Item Problem / Option Button to Press
Extra
Reset
Factory-preset data is restored.
No Return to Menu.
Yes
Signal Select
At selected the AUTO, it will automatically be selected when just one source is available.
If there are more input sources available and you select one of them, the AUTO option is not
available. If multiple inputs are connected, the monitor may not recover the last one used after
turningitoandonagain.Itisonlypossiblewhenyousetaspecicsource.
NOTE
Select the Analog input.
SelecttheDigital(HDMI)input.
D-SUB
HDMI
LUMINANCE
IMAGE SETTINGS
COLOR SETTINGS
OSD
EXTRA
EXTRA
RESET
DDC/CI
SIGNAL SELECT
OVERDRIVE
AUDIO SOURCE
OPENING LOGO
FREESYNC
YES
NO
HDMI
ON
OFF
OFF
LINE IN
ON
OFF
ProLite XUB 2595WSU
INFORMATION
ON
OFF
Auto
Select the signal input automatically.
You can skip the Menu items and directly display an option setting screen by using the following
button operations.
Signal Select: Press the AUTO Button when the Menu is not displayed, it shows following Menu.
Press the AUTO Button again to select input source and then press the MENU Button.
Direct
Direct
SelecttheDigital(DisplayPort)input.
DP
Select the HDMI input.
LINE IN
Select the LINE IN input.
HDMI
Audio Source*
2
*
1
When OverDrive is activated, some level of image retention will be caused.
*
2
Suitable for HDMI/DisplayPort input only.
*
3
Only for DisplayPort input.
OverDrive*
1
O/-2/-1/0/+1/+2
It will improve the gray level response time of the
LCD panel.
A higher level results in a faster response time.
DDC/CI
O DDC/CIisO.
DDC/CI is On.On
Opening Logo
O OpeningLogoisO.
Opening Logo is On.On
SIGNAL SELECT
AUTO
D-SUB
HDMI
DP
Select the DisplayPort input.DP
FreeSync*
3
On
O
TheFreesyncfunctionisturnedo.
Enable the Freesync function.