User Manual

ENGLISH
BEFORE YOU OPERATE THE MONITOR 11

Signal Timing
Change to the desired signal timing listed on page 28: COMPLIANT TIMING.
COMPUTER SETTING
DISCONNECTING YOUR MONITOR
Ensurethatboththecomputerandthemonitorareswitchedo󰀨.
DisconnectthepowersourcerstandthenthePowerCablefromthemonitor.
Disconnect the USB Type-C cable from the computer and the monitor.
Disconnect the signal cable from the computer and the monitor.

For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor’s height
and angle to your own preference.

Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.

You are able to adjust the monitor's height up
to 130mm, angle up to 45° right and left, 22°
upward and 5° downward.

Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.

Careful attention is required not to pinch
your fingers or hands into the moving
part of the stand when you change the
height or the angle.

Injury can occur if care is not taken to
avoidngercontactwiththedisplays 
base when adjusting the height.
NOTE
Monitor
Stand
130m
m
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE
45° 45°