User Guide CUG00029-EN-A01 USER GUIDE Access point AP2-LAN This device complies with FCC radiation exposure limits set forth for general population. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
User Guide CUG00029-EN-A01 SUMMARY 1 Introduction .................................................................................................................................................................... 3 2 Connection to the internal serial access point using the LAN network.......................................................................... 3 3 Warning to users in the United States ......................................................................................................
Access point AP2-LAN User Guide CUG00029-EN-A01 1 Introduction This device is a radio access point used to transfers data into remote sensors nearby via a LAN connection. A serial to ethernet interface is embedded in the device. We provide to our clients a command list or a software library, to drive the access point. They are able to manage it with their own software and paired the sensors (temperature recorders, loggers, sensors).
User Guide Access point AP2-LAN Operation mode : CUG00029-EN-A01 RealCOM Mode - Install Moxa driver manager It can be downloaded here : https://www.moxa.com/Moxa/media/PDIM/S100000224/moxa-windows-driver-manager-driver-v3.0.zip This tool allows the creation of a COM Port on your desktop. This COM Port will be used to connect the T2004 with Hyperterminal (or equivalent).
Access point AP2-LAN User Guide CUG00029-EN-A01 Set a number to the COM Port and configure it : The created COM port has been added in Windows peripheral manager: IJINUS - 25 ZA de Kervidanou 3, 29300 MELLAC – France : +33 2 98 09 03 30 – Customer Service: +33 2 98 09 03 32 / sav@ijinus.
Access point AP2-LAN User Guide CUG00029-EN-A01 3 Warning to users in the United States Caution: the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. "NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
User Guide Access point AP2-LAN CUG00029-EN-A01 5 Revision of the document Date Revision 11/21/2019 2A01 Writer(s) A. Le Gac D. MAHE Modifications Creation of the document and translation IJINUS - 25 ZA de Kervidanou 3, 29300 MELLAC – France : +33 2 98 09 03 30 – Customer Service: +33 2 98 09 03 32 / sav@ijinus.
