User's Guide

Temperature data logger LT2
User Guide
CUG00028-EN-A01
IJINUS - 25 ZA de Kervidanou 3, 29300 MELLAC – France : [phone] – Customer Service: [phone] / [e-mail]
6
2 Introduction
This device is a wireless temperature sensor. It is installed in places where temperature-sensitive products are
stored or shipped and need to be monitored. It is able to record temperature data in a memory. The recorded
data can be retrieved locally using a radio access point.
3 Necessary equipments
LT2 temperature M0C0000-2 / WIJIKEY-2 A0G00010
Data Logger Programming kits including Non rechargeable lithium
the software IJITempLab battery 3.6V 2.6Ah for LT2
The LT2 data logger has an internal battery. To check or activate the radio connection, you can press the front
button. The LED flashes green by period every x seconds (depending on configuration). This LED indicates that
a radio connection is available with another device.
We have 2 choices of programming kit, at least one of them is necessary for local configuration by radio:
- Wiji kit (with its USB cable, antenna and software IJITempLab 4.7) or
- Wiji key (USB/HF stick) that comes also with the software