A Quick Look: Device Controls LED Indicator Aux Port Volume Down/ Previous Track Micro USB Port ON OFF Noise Cancellation Switch - Volume Up/ Next Track + Play/ Pause Button
Charging Micro USB Plug USB Plug 1. The USB charging cable has a Micro USB plug and a standard USB plug. 2. Insert the USB charging cable’s Micro USB plug into the charging port on your headphones. 3. Insert the USB charging cable’s standard USB plug into the USB port of a computer or suitable USB charging adapter. NOTES: -- Charging can take approximately two hours to complete when the battery is fully drained. -- Remove the charging cable once charging is complete.
Bluetooth Pairing PRESS & HOLD Pairing Mode Red and Blue: Flashing ON OFF - + 1. Press and hold the Play/ Pause button for 1-2 seconds to turn your headphones ON. 2. The LED Indicator will alternately flash red and blue to indicate your headphones are in pairing mode. Available device ANC Headphone 3. Go to the Bluetooth settings menu on your phone. Make sure Bluetooth is turned on. Connect to the available device listed as “ANC Headphone”. Paired Blue: Solid 4.
Using Your Headphones - PRESS & HOLD Volume Down/ Previous Track Play/Pause ON OFF - + 1. Press and hold the Play/Pause button for 1-2 seconds to turn your headphones ON and OFF. ON OFF - 2. Press the Play/Pause button to play a track. Press the button again to pause a track. - + 4. Press the Play/Pause button to answer a phone call. Press the button again to end the call. Double press the Play/ Pause button to redial a number. ON OFF - Volume Up/ Next Track + 3.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
