User Manual
Table Of Contents
- Contents
- English
- Safety information
- iRig Pro Quattro I/O
- Register your iRig Pro Quattro I/O
- iRig Pro Quattro I/O overview
- Battery and external supply
- 1 Installation and setup
- 2 Setup your DAW
- 3 Direct monitoring
- 4 Loopback
- 5 Limiter for inputs 1 and 2
- 6 Mode switches
- 7 Connecting microphones
- 8 Connecting instruments
- 9 Connecting line level signals
- 10 Connecting loudspeakers, headphones and other external devices
- 11 MIDI IN/OUT
- 12 Battery level meter
- 13 Troubleshooting
- 14 Specifications
- Warranty
- Support and more info
English
12
6.2 Stereo mode
When stereo mode is selected, inputs 1 and 3 are mixed into a single track (DAW input 1), as well as inputs 2
and 4 (DAW input 2). When in this mode, DAW inputs 3 and 4 are used as safety channels: this means that you’ll
be able to record the same signal present on DAW input 1 and 2 but reduced by 12dB as a backup in case your
sound source gets loud unexpectedly and causes the main channel to distort.
Multichannel
MODE
IN 1 IN 2
Ch1
Ch2
IN 3 IN 4
Ch3
Ch4
IN 1+3 IN 1+3IN 2+4 IN 2+4
-12dB -12dB
Ch1
Ch2
Ch3
Safe Channels
Ch4
Stereo
MODE
IN 1+2+3+4 IN 1+2+3+4
-12dB
Ch1
Ch2
Ch3
Safe Channels
Ch4
Mono
MODE