User Manual
Table Of Contents
- Contents
- English
- Safety information
- iRig Pro Quattro I/O
- Register your iRig Pro Quattro I/O
- iRig Pro Quattro I/O overview
- Battery and external supply
- 1 Installation and setup
- 2 Setup your DAW
- 3 Direct monitoring
- 4 Loopback
- 5 Limiter for inputs 1 and 2
- 6 Mode switches
- 7 Connecting microphones
- 8 Connecting instruments
- 9 Connecting line level signals
- 10 Connecting loudspeakers, headphones and other external devices
- 11 MIDI IN/OUT
- 12 Battery level meter
- 13 Troubleshooting
- 14 Specifications
- Warranty
- Support and more info
English
20
Stereo Output (unbalanced)
Unbalanced, TRS 1/8” stereo Jack
Output impedance: 150 Ohms balanced
Output level: 0 dBFS corresponds to +12 dBu
Frequency response: from 5 Hz to 44 kHz within 3 dB (96 kHz sample rate)
Dynamic range: 100 dB(A)
Channels crosstalk: 88 dB(A)
Headphones Output
TRS 1/8” stereo Jack
Output impedance: 22 Ohm
Output level: 26 mW/channel (32 Ohm load)
Frequency response: from 15 Hz to 44 kHz within 3 dB (96 kHz sample rate)
Dynamic range: 100 dB(A)