User Manual

English

USB Power

On fixed installations this port can also be used to POWER iRig BlueBoard instead of batteries. For example if

you plan to include iRig BlueBoard in a more complex pedalboard with integrated power-supply units, you can

fix iRig BlueBoard to your pedalboard with Bi-adhesive Velcro, and you can connect a standard Micro-USB

cable to this socket and to a regular 5V-USB power supply unit.

Troubleshooting

iRig BlueBoard is not turning ON.

Try replacing the batteries and check that their placement matches the polarity indicators.

iRig BlueBoard is not appearing on the control app.

Turn iRig BlueBoard off and on again by pushing the “A” button, and repeat search on the control app.

iRig BlueBoard is working, but my MIDI app is not receiving commands.

Go to the control app and setup each switch to transmit the message you need — make sure the proper MIDI

channel is set.

I’ve started iRig BlueBoard in BlueBoard mode but I can’t connect it to the control app.

Make sure that you have installed the latest version of the iRig BlueBoard app.

I’m trying to start-up iRig BlueBoard in MIDI over Bluetooth modes but no LED lights up.

Your iRig BlueBoard is not updated with the last firmware version.

Specifications

• Communication: Bluetooth LE (4.0).

• Compatible devices (Blueboard Mode): any iOS or Mac that supports Bluetooth LE (4.0) standard.

• Compatible devices (MIDI over Bluetooth modes): devices with new Core MIDI implementation: iOS 8 (and

above) and OSX Yosemite (and above) required.

• 2 x 1/4” TRS external inputs for switches or continuous control pedals.

• Four backlit foot switches.

• Low-intensity backlight on all four footswitches (optional) for easy visibility of the board on low light stages.

• Long batteries duration: Alkaline batteries: approx 50 hours without backlight, 35 hours with backlight.

• Lightweight sturdy and durable construction.